all 3 commenters below i have the same exact problem quickpwn doesnt work once i extracted and double clicked the quick pwn icon says has encountered problem and needs to close.... doesnt work
the first step of the ipod touch jailbreak i plug it in but then when i click next it say erorr and error says a unhandled expetation has occured in your applacatin plzzzz help me
My Quickpwn has an error when it says waiting for ipod to connect in recovery mode. The error says "Your device has connected in the wrong mode. This can be caused by incorrect following of the instructions, or a faulty USB connection. Please try again." Please help me fix this error!
I get through all the steps but quickpwn gets stuck on preparing my iphone 1sr gen for jail break. it never goes on to "hold home button for five sec. what should I do????
and i can jailbreak fine, but if i click unlock it sits at the step mods saying it putting my iPhone in recovery mode...it isnt cause im on it right now...
any idea whats goin on, ive redonwloaded bootloaders many times too
hey i had jailbroken my iphone andonce the screen went blank so it got all messed p i had to restore it and my jailbreaking software went away and when i try to jailbreak it again it doesnt get jailbroken and it gets restored again i have a 2.2.1 iphone 3g
i have an ipod touch 1st gen and i completely finished the jailbreak. the green checkmark and ve been waiting for about 10 mins or so and it stays at the boot up screen. what do i do? help!!!!! thanks
once you're done restoring and jailbreaking iTunes will ask you if you want to Restore to a New iPhone or Restore to a back up. Just restore to backup and you will get all your contacts back
for me it goes smoothly till the step six....the computer says that the quickpwn has stopped working and i tried seventy times and it always says that...
mine runs smoothly until the last step, it flashes white and i see the wuickpwn logo and it finishes wiritng everything, then it reboots and all i see is the apple logo for hours. can anyone help me?
hold home+pwer for 20 seconds until it turns off, then put your device into dfu mode
**while connected to your computer**
hold home 5 seconds, keep holding home + power button for 8 seoncds, release power button and continue holding home for 15 seconds
your ipod should be black at this point and iTunes should say "found iPod in recovery mode" press restore iTunes, then restart your computer and try the jailbreak again, it should work
ok so whenever i try to jailbreak, i follow all the steps and it gets past the part where you have to hold the home button for like 25 seconds. Then it says booting exploit something or other. And after that, nothing happens at all like it did in your video. Do you know what's wrong?
hold home+pwer for 20 seconds until it turns off, then put your device into dfu mode
**while connected to your computer**
hold home 5 seconds, keep holding home + power button for 8 seoncds, release power button and continue holding home for 15 seconds
your ipod should be black at this point and iTunes should say "found iPod in recovery mode" press restore iTunes, then restart your computer and try the jailbreak again, it should work
Okay. After restarting my computer and trying to do Quikcpwn again, it worked on my phone. I can't, however, move any of my applications on my phone now. Any advice?
How long does it take after it reboots? I did everything right, but it vibrates occasionally on the opening screen with the Apple logo (it's now the Pineapple logo), it restarts once in a while, and vibrates once in a while too. How long does this take? I have quite a few applications. Does this hinder it?
All right. Thank you. That worked. But how long is it supposed to stay at the Pineapple logo? I restored my iPhone 3G and made sure that I had 2.2.1 this time, and synced my applications. The logo has been on the screen for about five minutes now and it still hasn't actually come to the main screen. I have quite a few applications on my phone. Could this hinder its progress? It restarts every once in a while, but then stays at the screen. What should I do now?
It shuoldn't be staying on the pineapple logo for that long. It should go to your main screen. The number of applications should not hinder the timing that much. This may sound absurd, but try doing a iPhone restore and try restarting your PC then jailbreaking. That worked for a couple people having the same problem as you.
All right. I'll give that a try. I'll restore my phone and then restart my computer. I'll let you know the results. Should I close out of the break program after it says that it is done or doesn't that matter if it is up or not?
I also noticed that when I unzip the file that I had for quickpwn, I see Pwnmetheus.dlll libpwnmetheus.dll README.txt QuickPwn.exe and a folder titled Data. Do I have to do anything with these files?
Check my other videos i have a full untethered jailbreak for ipod touch 2nd gen.. Meaning you can turn it off and turn it back on freely and still be jailbroken!
Thumbs up if your watching it in 2011 lmfao.
5961238 2 months ago
Mac links Dont work '
says - 403 " Thats an error"
iFuzzzzeD 5 months ago
i cant download quickpwn into my pc do you have any other alternative links for windows 7
DEOSELIN18 6 months ago
all 3 commenters below i have the same exact problem quickpwn doesnt work once i extracted and double clicked the quick pwn icon says has encountered problem and needs to close.... doesnt work
kingpyro710 7 months ago
why is my quickpawn not openingg ?!
freddyimwithstupuid 10 months ago
i downloaded and unzipped quickpwn and have .net framework installed but my quickpwn is not opening.
ch1nkykrn 10 months ago
This has been flagged as spam show
Can someone please send me a working version of Quickpwn for 2.2.1
Send it to me via youtube or to collinisballin@gmail.com
ballacage3 11 months ago
whenever i click quickpwn its says quickpwn has encountered a problem and needs to close we are sorry for the inconvenience
skalax904 1 year ago
setup error....i get this for .net framework
gaansnargge 1 year ago
IT WORKS !!!!! :D thankyou i will subscribe
animator995 1 year ago
GUYS i figured it out :D but it only works with winzip if you see a program called quick[wn.exe doubleclick it and it will open
animator995 1 year ago
@animator995 could you please clarify what you did .. maybe you can help me when i try to open extracted quickpwn program it doesnt work...
kingpyro710 7 months ago
@kingpyro710 i dont know what i did :/ it was 9 months ago... sorry, but i think that if you have winzip and u click on quickpwn.exe it will open
animator995 7 months ago
Hope it works :D
animator995 1 year ago
I unlocked my iphone using
unlock-iphone org
They provided me with live support , images with step? by step instructions and was really easy , i recommend
andrewbisit30 1 year ago
how do u get quickpwn man! i already have the firmware buut where do u get quickpwn
pizzaeater6 2 years ago
wtf how do u get quickpwd
miguelsanchezish 2 years ago
It never gets into recovery mode. It keeps waiting for it to go. it's been like 5 minutes...Is that supposed to happen for the touch?
dahgutone 2 years ago
firmware error string...
jake102694 2 years ago
why can i never do this every time i try to jail break! :(
mylittleoreo 2 years ago
the first step of the ipod touch jailbreak i plug it in but then when i click next it say erorr and error says a unhandled expetation has occured in your applacatin plzzzz help me
sonu568cena 2 years ago
It doesn't go to the "Hold Home button for 5 seconds step." It just sits and waits at the recovery thing....I even tried doing the manual way.
04XxValentExX01 2 years ago
OMG YOU ARE AMAZING! it helped me out! :)
xohorsegal12xo 2 years ago 2
I Dont Even Get The Blue Arrow
85virgo 2 years ago
My Quickpwn has an error when it says waiting for ipod to connect in recovery mode. The error says "Your device has connected in the wrong mode. This can be caused by incorrect following of the instructions, or a faulty USB connection. Please try again." Please help me fix this error!
GodwinLee9991 2 years ago
ple HELP i got a blue screen on the 3.0 iphone 3g when i tried to jailbrake it how do i fix it
gfinezty1 2 years ago
read your youtube video title
it says for u said "Jailbreak 2.2.1 for iPod Touch & iPhone 2G/3G Quickpwn "
obviously a novice user would know, but just wanted to say Redsn0w is the easiest way to go with ipod touch 2g
pacorocks1 2 years ago
Nvm. I got past step 7 somehow. o.o
Thanks
x2john7x 2 years ago
I meant my QuickPWN is stuck at where 3:03 is. It doesn't go to the next step where I have to hold down the home button for 5 seconds.
x2john7x 2 years ago
It just stays where it says "Wait for your iPhone/iTouch to connect in Recovery Mode". It just stays there. @.@
Benitoh09 2 years ago
Go into recovery mode manually:
1. Turn off your iPhone if it isn't already.
2. Make sure iTunes is launched.
3. Hold the center button and while holding, plug your iPhone into your computer.
4. Keep holding until you get a message saying that iTunes has detected an iPhone in recovery mode.
shabzcohelp 2 years ago
Hey shabz. When I get to step 7, It doesn't go on to where I have to press the HOME button for 5 seconds. o.o
Help?
Benitoh09 2 years ago
what does it say??
shabzcohelp 2 years ago
Use redsnow..
put your device in dfu mode, and redsnow DOES IT ALL for you.
and you only get cydia, installer is just gay and slows it all down
pacorocks1 2 years ago
redsn0w is only for ipod touch 2g, and this video is not for the 2g
shabzcohelp 2 years ago
I dont get cydia or installer although they're both checked.
BottlesAndKazooie 2 years ago
I get through all the steps but quickpwn gets stuck on preparing my iphone 1sr gen for jail break. it never goes on to "hold home button for five sec. what should I do????
bmwenthusiest 2 years ago
i connect my iphone and it lets me hit the arrow, but it then asks me to locate the ispw file? it doesnt tick the iphone despite it being on 2.2.1
ShabbaNasty 2 years ago
dude on mine wat happens is i to the power button and home button thing and all the way through then once it hits 10 it says error
fireflame781 2 years ago
mine stays loading forever where it says hold down home button for 5 secs but it doesnt even get to that procedure someone help
XsneekyX13 2 years ago
it doesnt work i downloaded everything and it doent work i have a 1 gen ipod touch. HELP
bannaboy154 2 years ago
It has 2 be 2G!
sk8dontrun77 2 years ago
it says on 0:10 that it's for 1G .. and during the video it says it doesn't work with ipod touch 2G..
djAndski 2 years ago
does work... follow instructions
sk8eral123 2 years ago
mine has been on "uploading exploit bootloader" for almost half-an-hour now...is that supposed to happen?
freestylebbb 2 years ago
i think
sk8dontrun77 2 years ago
Why doesn't quickpwn locate my ipod.
It's a 2g, and its updated.
JakeJealousy001 2 years ago
Thank you so much! This works so well! And I have been looking how to jailbreak my iPod and I finally found it!
kitty305 2 years ago
u jerkoff it says in title ipod touch 2g bitch
ihaveipods 2 years ago
hey dumbass it says iPod Touch and iPhone 2G/3G.
idiot
shabzcohelp 2 years ago
it dosent fucking work with vista it wont open you should put that in the discription
america151 2 years ago
willthis delete your notes or photos?
america151 2 years ago
Not if you back up
shabzcohelp 2 years ago
i'm using internet explorer and do i open or save the file?
nightmaresbugme 2 years ago
ok wen i click on download firmware 2.2.1 for ipod touch 1G it doesnt show up plz help thx!
deathpaladin95 2 years ago
I have exacltey the same problem and i dont know where to browse for the file "/ Please help
Rachrascal 2 years ago
when the first window pops up try and save it to your desktop
jjn3420 2 years ago
Ive Jailbroken my iPod touch
and recenlty got a iPhone 2g 2.2.1
and i can jailbreak fine, but if i click unlock it sits at the step mods saying it putting my iPhone in recovery mode...it isnt cause im on it right now...
any idea whats goin on, ive redonwloaded bootloaders many times too
NighaGota12Inch 2 years ago
if i jailbreak ipod can i restore it after on itunes?
TevoRevo 2 years ago
yep
scottyjay94 2 years ago
hey i had jailbroken my iphone andonce the screen went blank so it got all messed p i had to restore it and my jailbreaking software went away and when i try to jailbreak it again it doesnt get jailbroken and it gets restored again i have a 2.2.1 iphone 3g
amanfifa 2 years ago
i am on firmware 2.2.1 1G
but im not gettin a green checkmark
tellin me i dont have 2.2.1
ilovegiro 2 years ago
just update it. That happened to me when i was doing it and nows its fine.
hads222 2 years ago
wats the song
dereknadeau 2 years ago
Orba Squara - Perfect Timing
shabzcohelp 2 years ago
is it complicated to upgrade to 2.2.1 and keep my phone unlocked to tmobile?
daosuf 2 years ago
i have an ipod touch 1st gen and i completely finished the jailbreak. the green checkmark and ve been waiting for about 10 mins or so and it stays at the boot up screen. what do i do? help!!!!! thanks
hockeytom11 2 years ago
hey im havin a problem opening up quickpwn to jailbreak my iphone 3g when i open it up it goes to windows media player and i cant extract files
PLEASE HELP MEEEE!!!!
Thanks Papaseh
papaseh 2 years ago
Hey, i really want to jailbreak my iphone but i have some questions.
1. Do you HAVE to restore your iphone before doing this?
2. Can i back up my iphone data before i jailbreak, so if somthing goes wrong or if i dont like it i can put it back?
3. What is "yell0wsnow"?
4. If i do have to restore and i do, will all my contacts, music, and pictures be gone?
Thank you, please answer my questions. I really want to jailbreak my iphone but those are the things holding me back :)
robby9022 2 years ago
Hey,
1. You don't have to but it is strongly recommended
2. Your iPhone has probably been backed up before when you synced, but if you right click the name of your iPhone in iTunes you can back-up again.
3. yellowsn0w is an unlocking tool that allows your iphone to work with t-mobile..etc
4. Once you back up all your contacts and pictures will be saved, but your music needs to be in the library.
Hope that helped, let me know if you have any other questions.
Please subscribe :D
shabzcohelp 2 years ago
Ok, when i jailbreak it will all my contacts and stuff be in the phone?
robby9022 2 years ago
once you're done restoring and jailbreaking iTunes will ask you if you want to Restore to a New iPhone or Restore to a back up. Just restore to backup and you will get all your contacts back
shabzcohelp 2 years ago
Ok, so when i'm done jailbreaking. Hook my iphone back up to the comp and go on itunes, and it will automatically ask me?
robby9022 2 years ago
mai
andresmeneses808 2 years ago
thank u
evabatet 2 years ago 2
it doesnt find my firm ware and i have 2.2.1 what do i do??
zacarip 2 years ago 4
what is the name of the song?
retardedskater53 2 years ago 2
when i download the 2.2.1 firmware for the 3G i get a rar file and when i extract it I get another file but i can't find the restore file help plz
WoWhordeUC 2 years ago 2
how can I jailbrak my ipod touch? it is not 3g or 4g or something like that, it was a 1.1.4, I have only opdate some times . can someone help me?
95thomas11 2 years ago
Fuck Yeah Man This Guys Fucking Ownz!! For Real You Were A Big Help Man Thankz Alot
retardedskater53 2 years ago 2
for me it goes smoothly till the step six....the computer says that the quickpwn has stopped working and i tried seventy times and it always says that...
ansdyd 2 years ago
so this won't work with my ipod touch V 2.2.1? :(
BubbaDough 2 years ago
depends on what kind of iPod touch you have
1G= No speaker
2G= has a volume rocker on side and has a speaker
shabzcohelp 2 years ago
what song is this
Armod18 2 years ago
mine runs smoothly until the last step, it flashes white and i see the wuickpwn logo and it finishes wiritng everything, then it reboots and all i see is the apple logo for hours. can anyone help me?
I am 1st gen PC on 2.2.1
oO0longearsdude0Oo 2 years ago
that's a little easy to fix glitch
hold home+pwer for 20 seconds until it turns off, then put your device into dfu mode
**while connected to your computer**
hold home 5 seconds, keep holding home + power button for 8 seoncds, release power button and continue holding home for 15 seconds
your ipod should be black at this point and iTunes should say "found iPod in recovery mode" press restore iTunes, then restart your computer and try the jailbreak again, it should work
shabzcohelp 2 years ago
I did 4 times
oO0longearsdude0Oo 2 years ago
ya, i did it like 5 times and it still doesnt work, any other suggestions?
HairyLeprocon 2 years ago
Mine tells me to find the IPSW and I don't know where it is. Please help.
yankees9494 2 years ago
you need to download the 2.2.1 firmware go here to download it felixbruns. de / iPod/ firmware/
Save the fle to your desktop and then browse for it through quickpwn
shabzcohelp 2 years ago
dude u need to download the software from the site he gave u. its located on the bottom of the info.
FIRSTSNIPER 2 years ago
hi i just wondering if this one gonna work in iphone 3g 16g i appriciate ur respond please answer me thank u
macuvex24 2 years ago
Yes it will work fine!
shabzcohelp 2 years ago
mine says Quickpwn is about to run your ipod.. this has been happenening for like 5 minutes
stavros816 2 years ago
it froze!
stavros816 2 years ago
lmao which was the same way as mine, but whatever. GOOD JOB.
shabzcohelp 2 years ago
how do you see your ipod touch/iphone on your pc?
haraop 2 years ago
On your computer get a program called realvnc
and on your ipod/iphone go to cydia and get veency
shabzcohelp 2 years ago
i have a 2.2.1 ipod touch 2g and when i go in to that quickpwn in the description (both) it says
"this quickpwn only jailbreaks ipod versions 2.0" HELP!!
MagicFilms2636 2 years ago
It doesn't work for iPod Touch 2G as it clearly says in the video.
Check my other videos for a jailbreak for iPod Touch 2G
shabzcohelp 2 years ago
o because i did it in quickfreedom once to my friends and i like to do it in quickpwn
MagicFilms2636 2 years ago
A quickpwn hasn't been released yet for iPod Touch 2G.
Quickfreedom is the easiest way to do it right now.
shabzcohelp 2 years ago
now i have some guy with glasses saying something russian :s??
koekiemonsterogen 2 years ago
wtf now i've started up my ipod all i see is a pineapple ?!!! i've been waitin for like 15 minutes and it still ain't changed
koekiemonsterogen 2 years ago
Comment removed
koekiemonsterogen 2 years ago
Comment removed
ayupurple 2 years ago
ok so whenever i try to jailbreak, i follow all the steps and it gets past the part where you have to hold the home button for like 25 seconds. Then it says booting exploit something or other. And after that, nothing happens at all like it did in your video. Do you know what's wrong?
DDRFreak1216 2 years ago
which program alows to watch into your iphone like on your desktop?
gotobiasklein 2 years ago
were is the link
mooattack58 2 years ago
um i did this and it worked but now its stuck on the apple logo what do i dooo???
xskater589x 2 years ago
that's a little easy to fix glitch
hold home+pwer for 20 seconds until it turns off, then put your device into dfu mode
**while connected to your computer**
hold home 5 seconds, keep holding home + power button for 8 seoncds, release power button and continue holding home for 15 seconds
your ipod should be black at this point and iTunes should say "found iPod in recovery mode" press restore iTunes, then restart your computer and try the jailbreak again, it should work
shabzcohelp 2 years ago
but i tried again, same problem, how eh?
ayupurple 2 years ago
what problem are you having?
shabzcohelp 2 years ago
okay i tried it for the 3rd time.
works [: thanks aye !
ayupurple 2 years ago
it will not auto find my ipod, im sure its 2.2.1.
wolvenblade2112 2 years ago
ok i did it a second time it worked!!!!!!!!!!
dkwat2makemyname 2 years ago
i jailbroke my 1st gen ipod touch and it is just staying on the apple logo
dkwat2makemyname 2 years ago
I Have Download the Program But the ipod did not appear its to browse for firmware bundle
Mex0317 2 years ago
it was great thank you for everything.
ryan1234abcd 2 years ago
np, i'm glad it worked for you :D
shabzcohelp 2 years ago
does this work for ipod touch 2g
Gman81dawgs 2 years ago
No gman, look at my other videos for the jailbreak for iPod touch 2G. It's called Untethered Jailbreak for iPod Touch 2G using Quickfreedom.
:D
shabzcohelp 2 years ago
o thanks but i just jailbroke with Quick freedom sorry
Gman81dawgs 2 years ago
lol i Just told you to use Quickfreedom
shabzcohelp 2 years ago
Okay. After restarting my computer and trying to do Quikcpwn again, it worked on my phone. I can't, however, move any of my applications on my phone now. Any advice?
sirius2008 2 years ago
You tried pressing and holding on an icon and they won't move?
shabzcohelp 2 years ago
How long does it take after it reboots? I did everything right, but it vibrates occasionally on the opening screen with the Apple logo (it's now the Pineapple logo), it restarts once in a while, and vibrates once in a while too. How long does this take? I have quite a few applications. Does this hinder it?
sirius2008 2 years ago
Try pressing home+power for 20 seconds(force restart) and see if it boots that way
if it doesnt let me know
shabzcohelp 2 years ago
All right. Thank you. That worked. But how long is it supposed to stay at the Pineapple logo? I restored my iPhone 3G and made sure that I had 2.2.1 this time, and synced my applications. The logo has been on the screen for about five minutes now and it still hasn't actually come to the main screen. I have quite a few applications on my phone. Could this hinder its progress? It restarts every once in a while, but then stays at the screen. What should I do now?
sirius2008 2 years ago
It shuoldn't be staying on the pineapple logo for that long. It should go to your main screen. The number of applications should not hinder the timing that much. This may sound absurd, but try doing a iPhone restore and try restarting your PC then jailbreaking. That worked for a couple people having the same problem as you.
shabzcohelp 2 years ago
All right. I'll give that a try. I'll restore my phone and then restart my computer. I'll let you know the results. Should I close out of the break program after it says that it is done or doesn't that matter if it is up or not?
sirius2008 2 years ago
I also noticed that when I unzip the file that I had for quickpwn, I see Pwnmetheus.dlll libpwnmetheus.dll README.txt QuickPwn.exe and a folder titled Data. Do I have to do anything with these files?
sirius2008 2 years ago
is this tethered?
talha746 2 years ago
hey talha, this isnt for iPod Touch 2nd Gen
Check my other videos i have a full untethered jailbreak for ipod touch 2nd gen.. Meaning you can turn it off and turn it back on freely and still be jailbroken!
shabzcohelp 2 years ago
will i ever be able to jailbreak my 2g ipod touch on 2.2.1
shaunstully 2 years ago
of course, there is a untethered jailbreak for ipod touch 2G.. check my newest video..it's an easy program too
shabzcohelp 2 years ago
i upgraded my iphone to 2.2.1 but when i open quickpwn its say fireware error string when i brows 2.2.1 how do i fix this?
aznrice645 2 years ago
Are you using the right 2.2.1 firmware?
shabzcohelp 2 years ago
Nice!
Akabane69 2 years ago
this was the only one that explained it to me and it worked, thanks man i owe you one ;)
kylesbetch 2 years ago
no problem man, i'm glad it worked out for you
please subscribe if you haven't already
shabzcohelp 2 years ago
i dunt have the part at 2:03 :(
wher the ipod touch is on the left side how come i dont have that and i cant find the file if i try to browse it HELLLLP D:
xChesseCakeXxo 2 years ago
How do I tell if I have a 2nd Gen iTouch?
GearHead916 2 years ago
i your itouch has a speaker or not, if it does you have gen 2
poe1593 2 years ago
if it has a speaker lol
rodrick5555 2 years ago
I have 2.2.1 and when I browse for the firmware I dont get a check mark. Help?
cort150 2 years ago
Oh I see that you say it wont work with itouch 2nd gen nevermind then
cort150 2 years ago
Will I lose all existing data/apps/contacts/etc. on my phone if I try this?
knarfny 2 years ago
if you back it up you won't lose anything
shabzcohelp 2 years ago
It happened also by me....my ipod touch freezes at the apple logo screen....
can someone help please?
thanks a lot before!
rs041 2 years ago
Put your ipod into DFU mode
**make sure you're connected to your computer via usb**
hold home for 5 seconds, continue holding home + power for 8 seconds, release power and continue holding home for 15 seconds
iTunes should pop up saying iPod in recovery mode. Press restore
Then restart your computer and try the jailbreak again.
That has worked for many other people should work for you
shabzcohelp 2 years ago
thanks for the reply, I have restored my iPod and tried to jailbreak again but still the same result.
Well, it seems this matter not only happen to me....
Is there someone who know the solution?
rs041 2 years ago
same thing happened with me, i just got scared and restored it too quickly. wait about 10 or 15 minutes at the apple logo screen.
makesure55 2 years ago
I waited about 30 minutes, but still nothing happened ;(
rs041 2 years ago
can u help me jailbreak my ipod touch
hightechhigh123 2 years ago
what do you need help with?
shabzcohelp 2 years ago
after i jailbreak it and the ipod is rebooting it freezes at the apple logo screen.
imamazing0455 2 years ago
Put your ipod into DFU mode
**make sure you're connected to your computer via usb**
hold home for 5 seconds, continue holding home + power for 8 seconds, release power and continue holding home for 15 seconds
iTunes should pop up saying iPod in recovery mode. Press restore
Then restart your computer and try the jailbreak again.
That has worked for many other people should work for you
shabzcohelp 2 years ago
mine says firmware error string and i have the same exact thing as you do
kinkaid40 2 years ago
You're not using an iPod Touch 2nd Gen are you?
shabzcohelp 2 years ago
isnt jailbreaking illegal
MaciFone 2 years ago
nope. just voids ur warrenty so u cant send it back untill u remove the jailbreak
runescapezen221 2 years ago
can u get rid of a jailbrake after u put it on ur ipod or is it permenently on there
C013mandude 2 years ago
just restore ur ipod on itunes and its back to normal
TheoYianni 2 years ago
great vid, got it no problem first try :P thanks man!
barbuzzi9 2 years ago
i have done all what you said and now my iphone wont start up :( just stays on the picture of the apple when it starts up :( help me please !!
ERMiNEEDaNAME 2 years ago
is there any way of viewing your ipod/iphone on your computer screen without jail breaking it
mrdarren5 2 years ago
thank you so much i looked at so many other tuts and this is the only one that helped at all thanx
footfary 2 years ago
np man :D
please subscribe
shabzcohelp 2 years ago
hey help me plzzz
can't extract quick pwn error come up saying error reading the file wen i extract
jattinthehood 2 years ago
what is a jailbreak please tell me
RebornA22117 2 years ago
hacking!
95thomas11 2 years ago
does this work with 2nd generation ipod touch?
OmgItsKennethxD 2 years ago
Quickpwn never seems to work for me, it always crashes on the last step. I have a Mac if that makes a difference and an iPod touch 2.2.1
juniorrockclimber 2 years ago
im jst going to do it on my windows instead of mac
BoM194 2 years ago
Good idea I'm not too aware of errors on macs
shabzcohelp 2 years ago
it says quickpwn is about to run on my ipod for 20 minutes
BoM194 2 years ago
Did you download the quickpwn from my description?
shabzcohelp 2 years ago
yes
BoM194 2 years ago
Is there a way to back up my cydia apps on a 2.2.2 jailbreak?
bluetube336 2 years ago
yes go to my website in the video description
shabzcohelp . freehostia . com
and click on tutorials in the menu and you will see
"how to back up cydia apps using aptback up from cydia"
shabzcohelp 2 years ago
okay thanks
bluetube336 2 years ago
Thanks, worked perfectly.
AsicsXC 2 years ago