Project of Final Year Sir Syed University Pakistan

[umais09]

very slow,

[mustafadaabarz]

@vidurnayyar...... of parking system and thus it corresponded to any random empty space on conveyor. When the person came back to take his/her car he showed the ticket (it could be bar code or any other simple logic card) which showed the specific location of the car and this would thus be given as input to PLC and PLC corresponds to bar code of simple logic card and customer gets his/her car from that specific location because each card was programmed in PLC with corresponding location.

[mustafadaabarz]

@vidurnayyar......well I can tell you the logic my friend. there were sensors fitted at the end of each conveyor system on which car needed to be parked. So whenever car was parked onto the conveyor the sensor told the PLC that there is a car present on it that means the input of PLC got the signal from sensor.

Whenever the car entered the parking system it was given a ticket which was manually issued from the person sitting at the entrance of parking system ...to be continued ....

[vidurnayyar]

i need help as even m inspired to make the same project, please help me on how did u program the plc that it knew which car was to be picked up when?

[mustafadaabarz]

hahah yeah the motor is slow...thats the one we could find :) hhahaha..anyway thanks

[mustafadaabarz]

hahah yeah the motor is slow...thats the one we could find :) hhahaha

[TheFrozenDesires]

ye kal tk upper chala jaey ga :) lolx kidding yar nice effort

[mustafadaabarz]

@TheFrozenDesires thanks dost

[TheFrozenDesires]

ye kal tk upper chala jaey ga :) lolx kidding yar nice effort 

[nathneha]

hi. can u tell me the total cost of this project?

[mustafadaabarz]

@nathneha total cost 30,000 PKR

[MAmmad19890]

its good . I m in final year of computer engineering can u tell me about some project . thanks

[adilcheema12]

hy i hv

project on robotics for sale. each n every thng in running condition.code + harware +software

[tehseenb10]

good work....but speed should be fast...

[mustafadaabarz]

@tehseenb10 ... yes i know it's slow....we had limited budget and time...this is the best with all resources we could gather :-)

[3gtecho]

hi bro! if you don't mind can i have the circuit diagram of this project! thnx :)

[syedasaraahmed]

i just love your project

u see m gna be in final year the next year

but I got no idea in my mind:(

can u help me...???

i mean i just want sum ideas for my final proj

[mustafadaabarz]

oh. Nice to see someone coming in the final year. Well I can surely help you or any other person. I can give you ideas and also help you to implement them. If you are interested in PLC I can get your project done in PLC or if you are interested in some new technology I can advice you to do some work with ENERGY EFFICIENCY and involve you in my work right now. you can contact me on 03018258399. Take care

[najmi7264]

not bad your project...

see my college project...

KKTMBP..

[mustafadaabarz]

hmmm..yup it's slow because i couldn't find a fast motor and we had to keep the right speed so that the sensor detects properly and stops the conveyor(central) at desired position

[82abdul]

nice project .. but dear it working to slow..

[mustafadaabarz]

@82abdul ... we had limited budget....:-)

[mustafadaabarz]

Oh thanks for viewing my project and giving 10minutes of your precious time, well I want to tell you is this that I work in ASEA BROWN BOVERI (ABB) in Pakistan, the time at which I made this project was when I didnt know much about PLC's my dear nor much people could demonstrate this whole project, and to your very kind information because of this project City District of Karachi has approached me and we have submitted this designing as a basis for parking problem.

[nareshkeswani80]

how many number will you get for that well in ssuet you will get more then 180 but in really life this project isn't worth for 10 poiintsorry for that as well any ways keep it up if you have been tought by ammer is he your teacher then it is alright i am also a graduate of ssuest but nowday i work in england for a compy which makes pakaging machines as a system engineer if you need help please let me know i'll be glad to help keep it up

[mustafadaabarz]

The whole project including conveyor system to gear motor system were all designed by us. But still thanks alot for viewing it.

Regards,

Mustafa Raza Syed

Application Engineer

ABB Pvt Ltd

[mustafadaabarz]

Dear nareshkeswani....

I also want to tell you that I got 193 out of 200 for this project.....

Regards,

Mustafa

[nareshkeswani80]

hi mate you have really done a good job but don't mind can say something this is a child sort of work i can't see any logic in it i am really very sorry to say that i actually spend my ten minutes to see that video clip

i am sure that you would have spend arround one year on it and i am sure i would only take 1 hour for it and any plc you name the place ad i'll do it with HMI program it and you are asking in this video about

[mustafadaabarz]

Oh thanks for viewing my project and giving 10minutes of your precious time, well I want to tell you is this that I work in ASEA BROWN BOVERI (ABB) in Pakistan, the time at which I made this project was when I didnt know much about PLC's my dear nor much people could demonstrate this whole project, and to your very kind information because of this project City District of Karachi has approached me and we have submitted this designing as a basis for parking problem.