It's not exactly true that the factory can not tell you used a tuner. There is a read only portion of the memory and if you ever have a major warranty issue and the factory thinks it may be caused by using 3rd party software it will be sent in and checked.
i dont see any vids of any basically stock except for (this) programmer trucks getting on it,guess ill have to get one and post some,i like the REAL world,not the $20,000.00 engine work dyno vids...
thanks for the info,i was wondering about the "flash" if the factory could tell.
i guess my comment doesnt read like it did in my head,id like to see a vid of a stock truck with this programmer mod only,to see what kind of power it lays down,also my uncle has an (edge
5 stage junk) on his 01' dodge 5spd mine is an 06' with auto,can i use this unit on both if he uninstalls the edge he also has a turbo and injectors upgrade,sry for the 20questions and all, thanks....
in addition to our previous comment, depending on the model of your c3.2 you might have to undo a 10mm bolt and then it should slide right off. They plug right on to the computer. it is on the front side right in the middle of the connector.
power wise they are very comparable, a hand held versus something that will shift power on the fly are pretty different. It depends on what you are looking for.
Can a stock 06 cummins tranny handle al the extra hp. and trq. than the predaor gives? I really want one of those diablosport predators or if my tranny can't handle it, I'll get the powerpuck.
kinda off topic but are you familiar with the van aken smartbox? im trying to uninstall mine but it wont budge. i need to physically pull the loom off but it wont budge. do i just pry it off or will i wreck something?
c3.2 for a 2004 early half it seems like the loom should just slide off but the damn thing just wont budge at all. does it have tabs of some sort? i dont know but once i take it off i'm gonna get a different chip altogether i think
there are usually tabs that you can use a small screwdriver or o-ring pick or something to lift up and then slide it off like you can see in our TDI smartbox install video, of course that is assuming the tabs havent broken or anything.
It's not exactly true that the factory can not tell you used a tuner. There is a read only portion of the memory and if you ever have a major warranty issue and the factory thinks it may be caused by using 3rd party software it will be sent in and checked.
whamisrick 11 months ago
did it feel less powerful when u went back to stock?
sergsrt8 1 year ago
i bought a used one on ebay that is locked, how do I unlock it myself?
bordens47 2 years ago
@bordens47 you have to pay about 50 bucks to get it unlocked
h22sparkle 1 year ago
i dont see any vids of any basically stock except for (this) programmer trucks getting on it,guess ill have to get one and post some,i like the REAL world,not the $20,000.00 engine work dyno vids...
thanks for the info,i was wondering about the "flash" if the factory could tell.
digzie1 2 years ago
you just uninstall the programmer and then the dealerships can't trace it.
ParleysDiesel 2 years ago
i guess my comment doesnt read like it did in my head,id like to see a vid of a stock truck with this programmer mod only,to see what kind of power it lays down,also my uncle has an (edge
5 stage junk) on his 01' dodge 5spd mine is an 06' with auto,can i use this unit on both if he uninstalls the edge he also has a turbo and injectors upgrade,sry for the 20questions and all, thanks....
digzie1 2 years ago
If you purchased one it would work on the 03-07 dodge's, and it can only be on one truck at a time.
ParleysDiesel 2 years ago
Will this 'unlock' the tuner so that it can be transferred to another vehicle(of course the vehicle would have to be the same make and model).
rezamesmarian 3 years ago
does the diable programmer already have it installed in the computer or do you have to download it of the internet
possy415 3 years ago
you buy it already loaded for your specific vehicle
ParleysDiesel 3 years ago
hell yea five stars....
RedDemon99 3 years ago
i just bought a diablo sport but it is not up loaded do you know how to do it form the computer
hdjosue 3 years ago
04 dodge cummins and the smartbox c3.2 i think it should just slide off but it wont budge. are there tabs?
dentonmccallum 3 years ago
in addition to our previous comment, depending on the model of your c3.2 you might have to undo a 10mm bolt and then it should slide right off. They plug right on to the computer. it is on the front side right in the middle of the connector.
ParleysDiesel 3 years ago
when plowing, is there a certain setting that works best or should you stick with stock settings?
kkurt212 3 years ago
I'd use one of the lower settings.
ParleysDiesel 3 years ago
ok, thanks
kkurt212 3 years ago
how does a diablo compare to a Bully Dog or Edge juice?
kkurt212 3 years ago
power wise they are very comparable, a hand held versus something that will shift power on the fly are pretty different. It depends on what you are looking for.
ParleysDiesel 3 years ago
Can a stock 06 cummins tranny handle al the extra hp. and trq. than the predaor gives? I really want one of those diablosport predators or if my tranny can't handle it, I'll get the powerpuck.
YFZRIDR91 4 years ago
It will, we usually just run ours on the 100hp setting.
ParleysDiesel 4 years ago
Part #U7165??
meatman310 4 years ago
That's the one.
ParleysDiesel 4 years ago
Does that tuner work on a 04 ford 6.0 diesel econoline van? I have a 4' exh and drop in k&n.
meatman310 4 years ago
It is a different part number, but yes, it will work on your vehicle just fine.
ParleysDiesel 4 years ago
kinda off topic but are you familiar with the van aken smartbox? im trying to uninstall mine but it wont budge. i need to physically pull the loom off but it wont budge. do i just pry it off or will i wreck something?
dentonmccallum 3 years ago
which smartbox and what year and make of vehicle?
ParleysDiesel 3 years ago
c3.2 for a 2004 early half it seems like the loom should just slide off but the damn thing just wont budge at all. does it have tabs of some sort? i dont know but once i take it off i'm gonna get a different chip altogether i think
dentonmccallum 3 years ago
there are usually tabs that you can use a small screwdriver or o-ring pick or something to lift up and then slide it off like you can see in our TDI smartbox install video, of course that is assuming the tabs havent broken or anything.
ParleysDiesel 3 years ago
The performance setting for the cummins trucks is 160hp.
ParleysDiesel 4 years ago
How many real world hp will you gain from it??
napalm84 4 years ago