The 3 things I like about this video: 1. its filmed in a trailer park. 2. the weights ( for lifting ) are outside. 3. this guy has no garage to work in. way to go man, your cool
damnit man...i wish i had tool to do this kinda stuff..someones imagination is there only limit..one day buddy imma get ran over or sue someone to get new tools lol awesome job dude
Man i wish i could do this to my f150 its an 86 so i would care about the first tiem screw ups. nice truck man is there anyway droppin a truck without welding and stuff??
Nice work I like it got a question for you right now I got a static drop on my c10 flip kit hangers sits nice I did have shackles as well but put the stock ones back on do you think I can run them too but get my pinion angle adjusted.
hey i have an 04 colorado extended cab and i have 20s on it . i was considering gettin 24s but i saw one on 6s and caught my eye. and i wana cut a whole in the cab wall so i can put maybe like 3 15s but. what would yu recomend ? i dont wana bag it and also not to dropped jus a decent drop so the tires will be tucked in nice and wont rub great video btw! helped alot !
When you decide to z the frame please video that as much as possible. I have been trying to research it and there's not a whole lot about it. I'm a mini trucker from back in the day and we didn't do that. So it's new to me. I'm working on a gen 1 s10 blazer I wanna lay it out. Thanks
Nice job man! I just got done baggin the front of my hardbody. Im tryin to trade my civic for a nissan hardbody ext cab. And i wont it to be static dropped like hell lol. I do have a ? For u. Did u put drop spindles on ur truck?
@jeremybarrowman Haha awesome thank you I can't wait either. Gonna be a few more weeks for next video got alot going on and had a few problems I'll explain in next video.
im kinda new to this lowering thing..lol. i had my truck lowered today with 3'' blocks in the back (not angled) and adjusted torsions in the front. now when i take off from a stop the truck vibrates very badly.. do you have any idea what the problem might be?
@jaggmeister11 I would make sure Your universals are greased and take a good look at your carrier bearing 3" should not be bad for your pinion angle. And also check again for proper block placement and make sure it's bolted on tight ! Hope this helps.
@earthscraper69 thanks for the reply man. i finally figured it out! the drop pushed my driveshaft into the tailshaft of the trans. which was causing all of the rubbing and vibration..im gonna have it shortened monday.
@earthscraper69 haha it was during a computer class, my teacher is always asking what the point is, i just say it has no point other than its good people, nice rides, and really really fun
That's kool how u did ur bed for ur truck I'm getting rid of my little truck I'm getting a 96 dodge ram 1500 ext cab automatic I don't know if I could bag that kinda truck so I'm jus lower it instead
Great vid man. Funny you posted this. Just the other day i wonder how people do this. Im seriously considering buying a pos truck to learn. I've always wanted to learn and i never will if i dont go out on a limb and try, Im between a b2200, 70 datsun 620 and a hard body.
@brandonsexywhitaker Nice those are all Great choices and yes u got it just take a chance take your time and make your ideas come to life. Thank you for watching again.
The 3 things I like about this video: 1. its filmed in a trailer park. 2. the weights ( for lifting ) are outside. 3. this guy has no garage to work in. way to go man, your cool
fatgirlfister 1 month ago
nice
CUSTOMLIFR 1 month ago
i like the flowers in the window.. nice truck by the way. keep it up man.
bodybagged83 2 months ago
damnit man...i wish i had tool to do this kinda stuff..someones imagination is there only limit..one day buddy imma get ran over or sue someone to get new tools lol awesome job dude
twiztid1fiddy 2 months ago
Man i wish i could do this to my f150 its an 86 so i would care about the first tiem screw ups. nice truck man is there anyway droppin a truck without welding and stuff??
REDT4R1 3 months ago
Nice work I like it got a question for you right now I got a static drop on my c10 flip kit hangers sits nice I did have shackles as well but put the stock ones back on do you think I can run them too but get my pinion angle adjusted.
TheZayah76 5 months ago
What tools did you use? I hope one day I can get a project like this going on.
ModelKarKid 5 months ago
hey i have an 04 colorado extended cab and i have 20s on it . i was considering gettin 24s but i saw one on 6s and caught my eye. and i wana cut a whole in the cab wall so i can put maybe like 3 15s but. what would yu recomend ? i dont wana bag it and also not to dropped jus a decent drop so the tires will be tucked in nice and wont rub great video btw! helped alot !
wakaflockaflames9 5 months ago
nice build ...check out the engine swap i did on my mazda after i finish organizing everything ima start doing all the body work..nice build again..
camaroandmazda 5 months ago
nice
badfordf150 5 months ago
When you decide to z the frame please video that as much as possible. I have been trying to research it and there's not a whole lot about it. I'm a mini trucker from back in the day and we didn't do that. So it's new to me. I'm working on a gen 1 s10 blazer I wanna lay it out. Thanks
TheCkindley 6 months ago
How much would you charge to bodydrop my truck ? check out my videos
MREFILMZANDPHOTOZ 7 months ago
Badass truck keep up the work bro...love the speaker boxes!!
69dragger 8 months ago
@69dragger thank you and Lol I know right I'm Sad to say I won't be using those boxes lol
earthscraper69 8 months ago
im just lowered the dodge
jamesdavis19 8 months ago
Nice job man! I just got done baggin the front of my hardbody. Im tryin to trade my civic for a nissan hardbody ext cab. And i wont it to be static dropped like hell lol. I do have a ? For u. Did u put drop spindles on ur truck?
JonathanWard334 8 months ago
@JonathanWard334 Awesome tunner for a truck bad ass lol. And no, no spindles I should be able to lay frame with out them with the wheels I got.
earthscraper69 8 months ago
Waiting on the next video ur truck is looking perty badass dude I can't wait til ur finished its not even my truck and I'm anxious
jeremybarrowman 8 months ago
@jeremybarrowman Haha awesome thank you I can't wait either. Gonna be a few more weeks for next video got alot going on and had a few problems I'll explain in next video.
earthscraper69 8 months ago
im kinda new to this lowering thing..lol. i had my truck lowered today with 3'' blocks in the back (not angled) and adjusted torsions in the front. now when i take off from a stop the truck vibrates very badly.. do you have any idea what the problem might be?
jaggmeister11 8 months ago
@jaggmeister11 I would make sure Your universals are greased and take a good look at your carrier bearing 3" should not be bad for your pinion angle. And also check again for proper block placement and make sure it's bolted on tight ! Hope this helps.
earthscraper69 8 months ago
@earthscraper69 thanks for the reply man. i finally figured it out! the drop pushed my driveshaft into the tailshaft of the trans. which was causing all of the rubbing and vibration..im gonna have it shortened monday.
jaggmeister11 8 months ago
Your welcome I'm always watching every update you put up but I'm jus lower my new truck I'm bout to start a job soon I'm happy bout it that's bout it
jamesdavis19 8 months ago
haha i had to check for an update at skool cuz my home computer crashed, looking pretty damn sick!
1anmonty1 8 months ago
@1anmonty1 Lol awesome just don't get in trouble and thank you.
earthscraper69 8 months ago
@earthscraper69 haha it was during a computer class, my teacher is always asking what the point is, i just say it has no point other than its good people, nice rides, and really really fun
1anmonty1 8 months ago
@1anmonty1 Oh ok nice and lolyeah some people don't understand it's ok everyone has something they like that others dont understand.
earthscraper69 8 months ago
very cool man great how to and the trucks coming right along
splaudio1 8 months ago
@splaudio1 Thank you very much
earthscraper69 8 months ago
That's kool how u did ur bed for ur truck I'm getting rid of my little truck I'm getting a 96 dodge ram 1500 ext cab automatic I don't know if I could bag that kinda truck so I'm jus lower it instead
jamesdavis19 8 months ago
@jamesdavis19 Anything can be bagged lol have at it just make it your own and thank you for the compliment.
earthscraper69 8 months ago
Nice!
MrJdmCris 8 months ago
@MrJdmCris Thank you !
earthscraper69 8 months ago
Great vid man. Funny you posted this. Just the other day i wonder how people do this. Im seriously considering buying a pos truck to learn. I've always wanted to learn and i never will if i dont go out on a limb and try, Im between a b2200, 70 datsun 620 and a hard body.
brandonsexywhitaker 8 months ago
@brandonsexywhitaker Nice those are all Great choices and yes u got it just take a chance take your time and make your ideas come to life. Thank you for watching again.
earthscraper69 8 months ago