If you were aiming for such a displacement, why didn't you mess with the intake? It looks like you have the factory runners on it. Seems like it has plently of power though! Nice Vette
Is this the stock engine? Is this a standalone or just a chip? If it's a chip are you guys selling any and what kind of performance gains would you be looking at?
@fordsuckbigtime I have grand sport wheels on it now,the iroc wheels were only temporary. they had good tires and looked a hell of a lot better than the vette rims.
@barfmeoutdude they bolted right up the only difference in the iroc wheels vs the vette wheels for the '85 is the offset of the front iroc wheels,they stick out a little so I put them in the rear. but the rear iroc rims are the same size and offset as the vette rims.
@boobu73 auto, manual is tons of fun but I'm building this car as a daily driver and traffic sucks with a standard, plus I have an old camaro w/ a 4 speed so I dont "need" another manual car.
@ajlod934893 since when has velvet revolver, corvettes, and the american flag become redneck? ill listen to that shit all day in my z06 and ive never been called a redneck. its not the confederate flag and skynyrd dude. anyway badass c4 i used to have a 93 keep it up
@jlitz1748 thanks man , its good to see that there are still some people who know what they are talking about and not just talking trash to make themselves feel better.
@SmallTownK1d its a smallblock 400 bored .030 to a 406 , its out of a 72 3/4 ton blazer , only a 2 bolt but i have never had any issue with any 2 bolt build as long as you are not building an all out race car. this is my daily driver, it runs low 13s and I still have plenty to do to it.
@RWDtech actualy they are the same size the only difference is the offset... the rear iroc wheels are the same offset as the vette wheels just the front are different...they were only temporary anyway. has 17" gs wheels on it now.....and yes they fry just as good as the 16s
@ajlod934893 since when has velvet revolver, corvettes, and the american flag become redneck? ill listen to that shit all day in my z06 and ive never been called a redneck. its not the confederate flag and skynyrd dude. anyway badass c4 i used to have a 93 keep it up
@ajlod934893 OK, here is a response from a 63 yr old Cherokee Indian, who is on his 3rd Corvette, 6 ft tall and ONLY 150 lbs. NO Old Fat Redneck here. NO American Flag waver either. I am annoyed at this blatant rascism or generalization of Corvette owner's. Check out my amature videos and my bands music on my YouTube site.
What I really like about this video are the camaro wheels on the vette? 85 corvette???? Might as well do a 74 caprice next. You can put a 406 with a chip in a turd, but it will always be a turd.
@KROM1376 ....Tell you what, I'll build a what u all call a "muffstain" where you live. Did you mean Mustang? Anyway, I'll put a 406 in it and put crown victoria wheels or Ranger truck wheels on it, do weak burnouts and post it for you to see.
@rp374 hahaha and you still wouldn't be able to get out of your own way,I'll run your MUFFSTAIN any time. btw what color is your muffstain red or yellow?
@KROM1376 Easy there Cooter LOL. Its actually black with paint chips like the fart box you have. Lets race for a coon skin hat like the one you"re wearing in the video. Just having fun with yall!
@CONT4M1NAT3D aparently you have never done a burn out with a car with some real power, if you simply stomp on it from a dead stop with this car you will instantly be doing a donut , if you drag the brake just a little it keeps the car under control until you hit 2nd gear then you let off the brake and ride it out as long as you want... btw i would love to smoke your 86 iroc.
@TANK5539 westers garage did the chip wich is a custom burn for the engine I built wich is a small block 400 bored to a 406 (.030) w/ 202 heads and many other mods(still more to do though). I simply called westers and told them everything I had done to the motor and they burned a chip specificly for my motor,westers posted this vid.very easy instal (20 min) computer is mounted under pass. side dash , chip is under small cover on top of ecm w/ 2 screws and 2 lock tabs,ALWAYS disconnect batt.first
Its well known that the Vettes built in the 80s were some of the worst ever built. Under powered and always in the shop. They are pale compared to the late 90s and up.
@zestyguy87 read the rest of the coments on this car ,it is no where near stock. and besides its well known that the c4 corvettes are about the best bang for your buck as far as a well built great handling platform to perform some quick and relatively inexpesive mods and have a car that will roast most other cars on the road.
@MrNiko14 I paid $329. 2 years ago , dont know if their prices have changed but westers garage is the place that did it. they posted this vid that I sent them. this chip was a custom burn for the 406 that im running.
I'm not saying thats whats going on but could you imagine if you dropped off your vette to get worked on and they swapped the tires and did burnouts with all day
huge difference in driveability, this car wouldnt even idle before because of the bigger engine and all the mods, but after the chip it feels almost stock the drive around and cruise , but if you give it much more than a little bit of gas it wakes right up and screems
in my vette i got a problem, once start getting hot it makes presure in the radiator hose, but when got cold is not, i take off the termostat but is the same, if some body can help me thanks
thanks for all the comments guys, just wanted to add, a couple weeks ago I ran a 13.62 in the quarter mile @ 100 mph w/ a crappy .981 reaction time (spaced out at the line and didnt have time for another run ), i know i can do better next time.
that engine would really wake up with a lil help from tpis, an intake and the right cam and fuel injectors and it would likely jump down in low 12's @115, those intakes just don't breath to well up in the higher revs
No this motor is definately NOT stock.lower end is a small block 400 out of a 72 K20 Blazer bored .30 over to 406 cid. w/ a pair of 202 heads from a 75 K20 pickup (350 heads,w/steam holes for 400)
,CompCams cam and roller rockers. stock tpi intake is only temporary I plan on going with the holley stealthram intake.although as it sits it has no problems up to 5000 RPM,wich seems to be ok for now. trans is also still the stock 700R4 for now. NOTE:This car is a work in progress,still plenty to do.
no way is this vette has stock engine great music mate be honest i know your full crap that tpi 406 performance chip would not increase this much power from standard 350 tpi motor stop dreaming lol
WOOOO HOOOO! I'm about to turbo charge my 85 w the HP Performance kit (as soon as tax money comes back, haha)! Early c4s kick ass!!! Nice vid pal! Keep em coming!
thanx for all the comments i'm actualy the owner of the vette and just wanted to add the wheels are only temporary and will be replaced with 93grandsport wheels,plus they look alot better than the stock vette wheels,as for gears,stock 273s definately dont need any lower this thing is a tourqe monster,and the intake is sock for now,but i had to run 30lb injectors,but the chip made all the difference though,perfect drivability,comfortable to cruise nasty when u want to be,thanks again westers!
and there went his tires lol
mrorwick 2 months ago
love the iroc rims.
3gencamaroguy 2 months ago
how much HP does that vette have
mrcorvettej 2 months ago
stock intake was only temporary, using a modified stealth ram.
KROM1376 3 months ago
If you were aiming for such a displacement, why didn't you mess with the intake? It looks like you have the factory runners on it. Seems like it has plently of power though! Nice Vette
ybafool2 3 months ago
a vette with irocs? i like it
bigenginesismythang 3 months ago
400 small block torque + Tuned Port Injection = Match Made in Heaven
CSXT8250 6 months ago
damn clean vette you got there! Maro rims looking good tho!
fetterFriB 9 months ago
why the iroc wheels???
85corvette 11 months ago
Is this the stock engine? Is this a standalone or just a chip? If it's a chip are you guys selling any and what kind of performance gains would you be looking at?
ego4show 11 months ago
why did you put old iroc z wheels on it, and you should have left it stock or slight mods, this thing isnt very impressive... at all.
JohnMichaelC64 1 year ago
take them camaro wheel off stupied
fordsuckbigtime 1 year ago
@fordsuckbigtime I have grand sport wheels on it now,the iroc wheels were only temporary. they had good tires and looked a hell of a lot better than the vette rims.
KROM1376 1 year ago
That song would be either velvet revolver or stone temple pilots I can't remember. Did those iroc rims bolt right up or did you use spacers?
barfmeoutdude 1 year ago
@barfmeoutdude they bolted right up the only difference in the iroc wheels vs the vette wheels for the '85 is the offset of the front iroc wheels,they stick out a little so I put them in the rear. but the rear iroc rims are the same size and offset as the vette rims.
KROM1376 1 year ago
whats the name of the song?
sakattack19 1 year ago
@sakattack19 she builds fast machines by velvet revolver
KROM1376 1 year ago
whats the name of the song?
sakattack19 1 year ago
the camaro wheels belong on a camaro. Makes stupid people think its a camaro and not a vette
drozak3207 1 year ago
hey is this car automatic transmission or manual
boobu73 1 year ago
@boobu73 auto, manual is tons of fun but I'm building this car as a daily driver and traffic sucks with a standard, plus I have an old camaro w/ a 4 speed so I dont "need" another manual car.
KROM1376 1 year ago
That thing hits the tires quick and hard. Vette makes em wet.
CoolAidGTO 1 year ago
camaro wheels?
JDMxGSRxVTEC 1 year ago
@ajlod934893 since when has velvet revolver, corvettes, and the american flag become redneck? ill listen to that shit all day in my z06 and ive never been called a redneck. its not the confederate flag and skynyrd dude. anyway badass c4 i used to have a 93 keep it up
jlitz1748 1 year ago 2
@jlitz1748 thanks man , its good to see that there are still some people who know what they are talking about and not just talking trash to make themselves feel better.
KROM1376 1 year ago
Comment removed
barfmeoutdude 1 year ago
so what kind of block do you have and is it a 4 bolt, just curious cause i have a 383 in my 85 vet
SmallTownK1d 1 year ago
@SmallTownK1d its a smallblock 400 bored .030 to a 406 , its out of a 72 3/4 ton blazer , only a 2 bolt but i have never had any issue with any 2 bolt build as long as you are not building an all out race car. this is my daily driver, it runs low 13s and I still have plenty to do to it.
KROM1376 1 year ago
wow im really impressed... you got a real hot rod here especially when you powerbrake it... what a loser
wvgirlygirl1968 1 year ago
oh god...who would put Iroc wheels on a corvette!! they are smaller!!
RWDtech 1 year ago
@RWDtech actualy they are the same size the only difference is the offset... the rear iroc wheels are the same offset as the vette wheels just the front are different...they were only temporary anyway. has 17" gs wheels on it now.....and yes they fry just as good as the 16s
KROM1376 1 year ago
damn dude tht car is sexy as hell and fast nice work!!!!
tmakidd0703 1 year ago
I love Vette's but the redneck music and American flag are why people make fun of Vette drivers as old fat rednecks.
ajlod934893 1 year ago
This has been flagged as spam show
@ajlod934893 since when has velvet revolver, corvettes, and the american flag become redneck? ill listen to that shit all day in my z06 and ive never been called a redneck. its not the confederate flag and skynyrd dude. anyway badass c4 i used to have a 93 keep it up
jlitz1748 1 year ago
@ajlod934893 OK, here is a response from a 63 yr old Cherokee Indian, who is on his 3rd Corvette, 6 ft tall and ONLY 150 lbs. NO Old Fat Redneck here. NO American Flag waver either. I am annoyed at this blatant rascism or generalization of Corvette owner's. Check out my amature videos and my bands music on my YouTube site.
Lonewolf36 1 year ago
What I really like about this video are the camaro wheels on the vette? 85 corvette???? Might as well do a 74 caprice next. You can put a 406 with a chip in a turd, but it will always be a turd.
rp374 1 year ago
@rp374 spoken like a true turd....you a muffstain driver too?
KROM1376 1 year ago
@KROM1376 ....Tell you what, I'll build a what u all call a "muffstain" where you live. Did you mean Mustang? Anyway, I'll put a 406 in it and put crown victoria wheels or Ranger truck wheels on it, do weak burnouts and post it for you to see.
rp374 1 year ago
@rp374 hahaha and you still wouldn't be able to get out of your own way,I'll run your MUFFSTAIN any time. btw what color is your muffstain red or yellow?
KROM1376 1 year ago
@KROM1376 Easy there Cooter LOL. Its actually black with paint chips like the fart box you have. Lets race for a coon skin hat like the one you"re wearing in the video. Just having fun with yall!
rp374 1 year ago
@rp374 Its all good , I enjoy some friendly ball busting , btw Diasy Duke says wusup.
KROM1376 1 year ago
@zestyguy87 by looking at your videos, all you got to drive is a bicycle so stfu
wheeler8801 1 year ago
where did you get the chip from
longlinner 1 year ago
@longlinner wetsers garage did the chip they posted this vid.
KROM1376 1 year ago
anyone can power brake dude... run it with my 86 iroc-z...
CONT4M1NAT3D 1 year ago
@CONT4M1NAT3D aparently you have never done a burn out with a car with some real power, if you simply stomp on it from a dead stop with this car you will instantly be doing a donut , if you drag the brake just a little it keeps the car under control until you hit 2nd gear then you let off the brake and ride it out as long as you want... btw i would love to smoke your 86 iroc.
KROM1376 1 year ago
i have an 85 corvette and want to know how to get this chip and how to instal it, what else is done to this car
TANK5539 1 year ago
@TANK5539 westers garage did the chip wich is a custom burn for the engine I built wich is a small block 400 bored to a 406 (.030) w/ 202 heads and many other mods(still more to do though). I simply called westers and told them everything I had done to the motor and they burned a chip specificly for my motor,westers posted this vid.very easy instal (20 min) computer is mounted under pass. side dash , chip is under small cover on top of ecm w/ 2 screws and 2 lock tabs,ALWAYS disconnect batt.first
KROM1376 1 year ago
Its well known that the Vettes built in the 80s were some of the worst ever built. Under powered and always in the shop. They are pale compared to the late 90s and up.
zestyguy87 1 year ago
@zestyguy87 read the rest of the coments on this car ,it is no where near stock. and besides its well known that the c4 corvettes are about the best bang for your buck as far as a well built great handling platform to perform some quick and relatively inexpesive mods and have a car that will roast most other cars on the road.
KROM1376 1 year ago
@zestyguy87 sounds like a rustang owner to me... get a clue ... if you're ever in mass. i would love to roast you and your muffstain.
KROM1376 1 year ago
how much did tha chip cost and were can i buy it at?
MrNiko14 1 year ago
@MrNiko14 I paid $329. 2 years ago , dont know if their prices have changed but westers garage is the place that did it. they posted this vid that I sent them. this chip was a custom burn for the 406 that im running.
KROM1376 1 year ago
One thing I love on the older 1984 to 1989 vettes is the amasing looks and colors of the dash!!!
eLpeach 1 year ago
really Camaro wheels? get some C5/C6 wheels on it with some big shiny brakes
gearheadd318 2 years ago
got a set of grand sport wheels on it now
KROM1376 2 years ago 2
The Camaro wheels look fucking dope on the C4 Vette.
420witchdoctor 1 year ago
I'm not saying thats whats going on but could you imagine if you dropped off your vette to get worked on and they swapped the tires and did burnouts with all day
5959512 2 years ago
im sure that happens more often than youd think
EigerBrad01 2 years ago
Are those Camaro wheels?
wheeler8801 2 years ago
yes they are off an 89 IROC , they are only temporary , will eventualy be replaced with grandsport wheels.
KROM1376 2 years ago
did the chip give you a big diffrent?
al3id 2 years ago
huge difference in driveability, this car wouldnt even idle before because of the bigger engine and all the mods, but after the chip it feels almost stock the drive around and cruise , but if you give it much more than a little bit of gas it wakes right up and screems
KROM1376 2 years ago
in my vette i got a problem, once start getting hot it makes presure in the radiator hose, but when got cold is not, i take off the termostat but is the same, if some body can help me thanks
rorro2404 2 years ago
it is normal for the system to build pressure when hot.
KROM1376 2 years ago
again , still plenty to do i'd like to eventualy break into the mid to high 12s , and still keep it comfortable as a daily driver like it is now.
KROM1376 2 years ago
thanks for all the comments guys, just wanted to add, a couple weeks ago I ran a 13.62 in the quarter mile @ 100 mph w/ a crappy .981 reaction time (spaced out at the line and didnt have time for another run ), i know i can do better next time.
KROM1376 2 years ago
that engine would really wake up with a lil help from tpis, an intake and the right cam and fuel injectors and it would likely jump down in low 12's @115, those intakes just don't breath to well up in the higher revs
redhot916spd 2 years ago
damn dude that thing is cool as shit
slayerdearly 2 years ago
Wow.... loved the burnout lol
BritCommando12 2 years ago
Thats cool
Vcorvette 2 years ago
I live in the same town as the guy who owns this C4. This car is sick. I seen it roasting a mustang few weeks ago!
Xhellbringer1 2 years ago 10
If you ran 87 octane in a chip that requires 93 would you get a rattling, ticking, knocking noise when you floor it?
xZZxTakedown 2 years ago
Comment removed
KROM1376 2 years ago
nice nice iroc rims
luisow360 2 years ago
Is it possible to add backseats to a c4?
ExtremeXer 2 years ago
no , no room
KROM1376 2 years ago 2
im sure not because no room to put the seats
Camaros5678 2 years ago
LOL, no.
homeslicev2 2 years ago
not stock motor
beakybuzzerd 2 years ago
holy shit that thing hauls ass.
illmagnified 2 years ago
thats sick man, nice
MMK86 2 years ago
That was for
drtyfknmouth
purefighter 2 years ago
No this motor is definately NOT stock.lower end is a small block 400 out of a 72 K20 Blazer bored .30 over to 406 cid. w/ a pair of 202 heads from a 75 K20 pickup (350 heads,w/steam holes for 400)
,CompCams cam and roller rockers. stock tpi intake is only temporary I plan on going with the holley stealthram intake.although as it sits it has no problems up to 5000 RPM,wich seems to be ok for now. trans is also still the stock 700R4 for now. NOTE:This car is a work in progress,still plenty to do.
KROM1376 2 years ago
no way is this vette has stock engine great music mate be honest i know your full crap that tpi 406 performance chip would not increase this much power from standard 350 tpi motor stop dreaming lol
wogustupido 2 years ago
If that is the stock TPI intake, then you are severely restricting the higher rpm performance of that 406...
I'd say put something like a TPiS Miniram, or converted LT1 intake on and you could perhaps rev higher than 4000 rpms...
zzzurd 2 years ago
I got a '90 vette with the L-98, does the vette have 406cid motor or is that what the chip is called because that thing seems fast as hell
ferrari3696 2 years ago
westers garage did the chip , they posted this vid.
KROM1376 2 years ago
WOOOO HOOOO! I'm about to turbo charge my 85 w the HP Performance kit (as soon as tax money comes back, haha)! Early c4s kick ass!!! Nice vid pal! Keep em coming!
drtyfknmouth 2 years ago
I'm seriously thinking about this too.
purefighter 2 years ago
Who did you get your chip from?
armyboyatc601 2 years ago
thanx for all the comments i'm actualy the owner of the vette and just wanted to add the wheels are only temporary and will be replaced with 93grandsport wheels,plus they look alot better than the stock vette wheels,as for gears,stock 273s definately dont need any lower this thing is a tourqe monster,and the intake is sock for now,but i had to run 30lb injectors,but the chip made all the difference though,perfect drivability,comfortable to cruise nasty when u want to be,thanks again westers!
KROM1376 2 years ago
If your adding 93 GS rims you will be looking for quite a long time as they did not make any in 1993. You will have luck with 96 GS rims though.
distkgo77 2 years ago
sorry typing error
KROM1376 2 years ago
Wheels look fucking cool on that Vett
ssaenz13 2 years ago
Yeah sorry man Them wheels dont look right on a vette.
I own a 86 vette also n 86 iroc
I must say only the 3rd gen camaros lookd good with them wheels.
Nice car though
Nitroxdude 3 years ago
ive got a 84 befor we did away with the cross fire an put high rise intake an 650 carb...would that chip work in my vette
raymond38824 3 years ago
If you're now using a carburator, the chip and computer are irrelevant
WestersGarage 3 years ago 6
Try the F-16 Pulse King it can be bought on ebayl.You cant hear the engine. Its awsome
cbateman9707 3 years ago
kick ass vette but i dont like thos rims
UBOYINPA 3 years ago
hey what gears and what is the intake manifold and what kind are the intake runners is tpi enough for that motor?
gwwmann1 3 years ago