This is the same board that Flyleaf uses...just sayin lol. I talked with the sound engineer about it...he said they were RENTING it for about 75K haha
.......Pre-Release and i love the interface on it. All you guys complaining that he's a Monitors Engineer and shouldnt be doing so much adjusting, looking at the video, he aint, anyone who used a Vi Console should know the different pages he's scrolling though. So he's just checking the levels, Monitors is a tasking job. Dont disrepect a sound engineer. Its not as simple as you think it is. Being the youngest Qualified sound Engineer, take it from me. (: Any questions contact me on Youtube.
Vi6's are awesome, These are made by my Dads company, Soundcraft, Harman International. Personally i think a Vi4 for Monitors and Vi6 for FOH, but depends on setup, deffo the lower grade on monitors, Vi2 on Monitors now would be awsome, i personally own a Vi1, .............
Vi6 is sweet, 2 fiber cables. Not a fat multi cable that weights 40 kg. But if you upgrade software to 90+ channels the mixer goes slower. Digital ftw!
november 12 : this is not a joke!: henry was a kid 10 years old....he was going to toilet and then someone locked outside the toilet door...so henry stucked inside for 1 week and when his mom when to the toilet...now that your reading it dont stop!!
she saw her son dead in the toilet.. send this 20 times or 4:00 midnight he will come and find you.. WARNING:THIS IS NOT A JOKE!
This "engineer" hasnt a clue what he's at. A monitor engineer does everything DURING SOUNDCHECK and maybe changes a few things in the firsty n second songs. If he's good at his job he loeaves everythin alone after that.
It's probably the soundcheck so that he can make it look like he's working for the cameras. Didn't see no band or anything apart from the engineer for that matter.
I dont fully agree with you. I've had some folks come with some very crappy backings, that were up to 6 channels. And i had a lot of trouble compensating. The shure as hell havent had anybody talented for mixing... but yeah, _usually_ a console just needs to be set up and taken down again... That why the audio engineer often gets stuck controlling some of the light...
ok manowar. lemme let u in on a little secret. a soundcheck is where the majority of the eq (specially voice) is done. I don't know what theaters you've worked in, but what he is doing is perfectly normal
@ 0:19, whoops ;) cool mixer in all. However I think this the FOH mixer, as monitoring usualy isnt done on stage ;) and I dont see any sound shielding or monitors standing here.
I have used this console many times in both FOH and monitor scenarios and it is in my opinion the best digital console on the market for both quality of sound and ease of use. In both situations. My Fav digi console hands down.
Have you ever tryed Midas Pro 6, Midas XL8, any of the Digico mixers? All of them is owning compaired to this console. But if you want the leading and best consol in the digital world, chek out midas XL8 ;) VI6 is nothing compaired...
Oh I guess the world should stop searching as you have spoken. Finally. Wow thanks for keeping us all informed. Strange that Yamaha would launch all these larger format consoles to the market when their entry level desk would be better. What a scam. More inputs, more outputs, 96K word clock, more FX engines, DCA's, quicker interface. All of these are superseded by your OPINION that a small format console can do a better job. Thanks pal. Sleep easy everyone, manowar has solved the debate.
looks like a christmas tree
ColdGripHandle 8 months ago
Even I can use this and I'm a lampie!
peanuts2105 10 months ago
Actually 96 channels we have one of the FIRST Vi6 models it still has beta soft wear
bowman265 1 year ago
2 people were so bad at Djing that they thumbs down:D
rockhopper123452 1 year ago
wats the jingle i like it
rockhopper123452 1 year ago
Thats awesome, I want one so bad! probably like 20,000+ though.
DJEpileptik69 1 year ago
This is the same board that Flyleaf uses...just sayin lol. I talked with the sound engineer about it...he said they were RENTING it for about 75K haha
FTWandstuff 1 year ago
how bout what ever works
toDan421 1 year ago
I love those automated faders ^^
PcFilmTech 1 year ago
Who knows the name of the song?
DJBjoerne 1 year ago
looks like he's set up on the side of the stage...running monitors?
jorgeyselene 1 year ago
.......Pre-Release and i love the interface on it. All you guys complaining that he's a Monitors Engineer and shouldnt be doing so much adjusting, looking at the video, he aint, anyone who used a Vi Console should know the different pages he's scrolling though. So he's just checking the levels, Monitors is a tasking job. Dont disrepect a sound engineer. Its not as simple as you think it is. Being the youngest Qualified sound Engineer, take it from me. (: Any questions contact me on Youtube.
scurtis18 1 year ago
@scurtis18 loser
ipoopoou 1 year ago
Vi6's are awesome, These are made by my Dads company, Soundcraft, Harman International. Personally i think a Vi4 for Monitors and Vi6 for FOH, but depends on setup, deffo the lower grade on monitors, Vi2 on Monitors now would be awsome, i personally own a Vi1, .............
scurtis18 1 year ago
Vi6 is sweet, 2 fiber cables. Not a fat multi cable that weights 40 kg. But if you upgrade software to 90+ channels the mixer goes slower. Digital ftw!
stianlie2 1 year ago
Thats a jingle from Logic....
Nostewitsch 1 year ago 21
lol they have it in garage band too
jsutton414 1 year ago
@jsutton414 Hehe yeah "east ender Long"
wrightie008 1 year ago
november 12 : this is not a joke!: henry was a kid 10 years old....he was going to toilet and then someone locked outside the toilet door...so henry stucked inside for 1 week and when his mom when to the toilet...now that your reading it dont stop!!
she saw her son dead in the toilet.. send this 20 times or 4:00 midnight he will come and find you.. WARNING:THIS IS NOT A JOKE!
supremeuniverseruler 1 year ago
digico d5 or midas xl8 pro 6 and venue d-show by digidesing the the best
NeXOgT 2 years ago
This "engineer" hasnt a clue what he's at. A monitor engineer does everything DURING SOUNDCHECK and maybe changes a few things in the firsty n second songs. If he's good at his job he loeaves everythin alone after that.
manowar7308171 2 years ago
It's probably the soundcheck so that he can make it look like he's working for the cameras. Didn't see no band or anything apart from the engineer for that matter.
MannGegenMann666 2 years ago
I dont fully agree with you. I've had some folks come with some very crappy backings, that were up to 6 channels. And i had a lot of trouble compensating. The shure as hell havent had anybody talented for mixing... but yeah, _usually_ a console just needs to be set up and taken down again... That why the audio engineer often gets stuck controlling some of the light...
BADtimmay 2 years ago
ok manowar. lemme let u in on a little secret. a soundcheck is where the majority of the eq (specially voice) is done. I don't know what theaters you've worked in, but what he is doing is perfectly normal
cks1001 2 years ago
this video was filmed during soundcheck :D
Heviaasi 1 year ago
any one know if this is at indigo 02 at the
o2 arena in london? looks well familiar
osheatagteam 2 years ago
this is "Maatanäkyvissä" festival in Finland, Turku.
Heviaasi 1 year ago
UFO motor Autofader controlling xD
pechschwinge 2 years ago
@ 0:19, whoops ;) cool mixer in all. However I think this the FOH mixer, as monitoring usualy isnt done on stage ;) and I dont see any sound shielding or monitors standing here.
theMMaI 2 years ago
Mixing the monitors is best done on stage.
DrumMasterT 2 years ago
ye I got the wrong monitor mix idea in my head :P was thinking about the recording monitor mix as opposed to stage monitor XD
theMMaI 2 years ago
is it good for studio recording work ???
hadrian017 2 years ago
WTF A HUI?
Thats a control surface dumbass!
They are probably using another VI for FOH.
You usually find the same model of board being used for both purposes, note I said most of the time.
cruelconvictions 2 years ago
Wow...! A VI6 for monitors! Pretty impressive! What was being used for F.O.H?
DrumMasterT 3 years ago 20
A mackie hui!!!
krishotsaucemiller 2 years ago
Really? I can't imagine that being used on FOH if they are using a VI6 for monitors.
DrumMasterT 2 years ago
I have used this console many times in both FOH and monitor scenarios and it is in my opinion the best digital console on the market for both quality of sound and ease of use. In both situations. My Fav digi console hands down.
zappafile 2 years ago
Have you ever tryed Midas Pro 6, Midas XL8, any of the Digico mixers? All of them is owning compaired to this console. But if you want the leading and best consol in the digital world, chek out midas XL8 ;) VI6 is nothing compaired...
johannmus 2 years ago
Bullshit. Best monitor desk....LS9. Best FOH desk...PRO6
manowar7308171 2 years ago
Oh I guess the world should stop searching as you have spoken. Finally. Wow thanks for keeping us all informed. Strange that Yamaha would launch all these larger format consoles to the market when their entry level desk would be better. What a scam. More inputs, more outputs, 96K word clock, more FX engines, DCA's, quicker interface. All of these are superseded by your OPINION that a small format console can do a better job. Thanks pal. Sleep easy everyone, manowar has solved the debate.
zappafile 2 years ago
there was just soundcraft series 5 on foh
Heviaasi 1 year ago
@Heviaasi mmm digital for monitors and Analogue for FOH nice
ricturtle 1 year ago
@ricturtle this VI6 had some problems and it crashed like 13times :D That explains why is it on monitors.
Heviaasi 1 year ago
@Heviaasi yeah that would explain it, nothing worse than whole bunch of pissed of punters who cannot hear anything. What did they use for Foh.
ricturtle 1 year ago
@ricturtle Soundcraft series 5
Heviaasi 1 year ago
@Heviaasi That is an awesome desk, I had a lot of fun with one of them, I have not used a VI 6 yet. hoping to change that oneday.....
ricturtle 1 year ago
@DrumMasterT second Vi6 xD
MzC6w580iuser 1 year ago
@DrumMasterT probably the same thing...you always want the same boards at both mix positions
CYPHA420 1 year ago