Thanks for the info.. However I found the the 2 rear wheels has a lot of play and acted as 3 wheel steering. I CA the struts in the straight position now it's a blast to take off. Still retract and still have shocks. This plane is awesome. Also as an FYI, I took off the stock fan units and put elite's 80mm habu edf's and it's a bullet now. Although a little cutting is required but the end result is night and day. Happy flying
Shypilito, the CG is at 85mm from LE... But i set it up to fall on the nose... The straight line take off is a little tricky... U have to tap the steering to get it to go straight, dont go full throttle until its staright... Use enough power to get it moving... Then get it straight, once its pointed to where u want it, go Full Power and start pulling the ele a little... Alot of practice and you will get it rite... Good Luck!!!
The A-10 is from Lanxiang chrisf844. She flies well actually. As i know, usually bec has a ferrite ring on it. But the one in this plane does not have it. Im fitting 2 ferrites soon. One on the Bec and one one the Esc wires... Hope that solve the problem... The A-10 make me look good on the landing... Around 30degree of flaps for landing and 20 for take off... Shypilito 1, good luck on your A-10. Im sure your going to enjoy it... The vertical is not bad for something this heavy...
@villagepilot wheres the CG supposed to be at. and i'm having the problem that i cant keep it straigh otake off.. wants to go all over the place.. It feels light on the front landing wheel..
Hey Guys... Im trying to sort out the staggering problem on the edf... The first time i power up the system, it went into programe mode. I fiddle with the trottle stick and it came to life. But was not sure of what programme it was in. After 4 days on the net looking for the programming sheet, i found it... He he... Further test has been done and the staggering went away a little but there is still some. Am thinking there is a little problem caused by long leads of the bec and trottle cable.
that was an awsome landing?? what was the deal with the edfs. why they sound like that? what couldnt you open it up to full throtle?? i have one on the way and i was just wondering..
That was one smoooooth landing!!! great A10, I am saving to buy this one is it lanxiang? or something... why are your EDF's staggering? I can here your edfs stuttering or slowing down like they are stopping and starting. is this a problem with this aircraft? awesome flight buy the way, good job.
styliiish!!! :)
nuruz666 5 months ago
awsome landing!! did you mod yours or is this stock?
74drat 7 months ago
@74drat no modified anything
lan33571 6 months ago
Thanks for the info.. However I found the the 2 rear wheels has a lot of play and acted as 3 wheel steering. I CA the struts in the straight position now it's a blast to take off. Still retract and still have shocks. This plane is awesome. Also as an FYI, I took off the stock fan units and put elite's 80mm habu edf's and it's a bullet now. Although a little cutting is required but the end result is night and day. Happy flying
shypilito1 10 months ago
Shypilito, the CG is at 85mm from LE... But i set it up to fall on the nose... The straight line take off is a little tricky... U have to tap the steering to get it to go straight, dont go full throttle until its staright... Use enough power to get it moving... Then get it straight, once its pointed to where u want it, go Full Power and start pulling the ele a little... Alot of practice and you will get it rite... Good Luck!!!
villagepilot 11 months ago
i can't keep it straight on take off to safe my life.. did you have the same problem? I'm changing those plastic wheels....
shypilito1 11 months ago
where's the CG supposed to be at???
shypilito1 11 months ago
The EDF problem was finally solve... Add a ferite ring to the ubec and another ferite ring to the esc... Now she flies great... ; )
villagepilot 11 months ago
Btw, the build thread is in RcHeadz. for (english version) and DuniaRc for (Malay version)
villagepilot 11 months ago
The A-10 is from Lanxiang chrisf844. She flies well actually. As i know, usually bec has a ferrite ring on it. But the one in this plane does not have it. Im fitting 2 ferrites soon. One on the Bec and one one the Esc wires... Hope that solve the problem... The A-10 make me look good on the landing... Around 30degree of flaps for landing and 20 for take off... Shypilito 1, good luck on your A-10. Im sure your going to enjoy it... The vertical is not bad for something this heavy...
villagepilot 11 months ago
@villagepilot wheres the CG supposed to be at. and i'm having the problem that i cant keep it straigh otake off.. wants to go all over the place.. It feels light on the front landing wheel..
shypilito1 11 months ago
Hey Guys... Im trying to sort out the staggering problem on the edf... The first time i power up the system, it went into programe mode. I fiddle with the trottle stick and it came to life. But was not sure of what programme it was in. After 4 days on the net looking for the programming sheet, i found it... He he... Further test has been done and the staggering went away a little but there is still some. Am thinking there is a little problem caused by long leads of the bec and trottle cable.
villagepilot 11 months ago
that was an awsome landing?? what was the deal with the edfs. why they sound like that? what couldnt you open it up to full throtle?? i have one on the way and i was just wondering..
shypilito1 11 months ago
That was one smoooooth landing!!! great A10, I am saving to buy this one is it lanxiang? or something... why are your EDF's staggering? I can here your edfs stuttering or slowing down like they are stopping and starting. is this a problem with this aircraft? awesome flight buy the way, good job.
chrisf844 11 months ago