Added: 3 years ago
From: xazzmanx
Views: 44,739
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (162)

Sign In or Sign Up now to post a comment!
  • Do you no the bmv theirs three pipes going to it yeh? One off the acuator to valve then one goin to the throttle body?.. Any idear what the outher pipe is supose to be as mine have been blocked off?.. Also iv just removed the bmv so the pipe comes off the actuator to bleedvalve/boostcontroler then to the throttle body is that correct, andd iv just bought a deacent boost controler off ebay. Be much help cheers

  • Hi, iv got a bleed valve its inbetween the acuator an bmv... What do you mean get rid of the bmv? cheers

  • @bikesmad get rid of the bleed valve and buy a decent ball and spring type boost controller then take the bmv off. with a manual boost controller you dont need the bmv, it would be pointless as the bmv will still modulate the boost pressure despite what the controller is set at.

  • aww rite okay, what psi would you recomend me to run mine as mine just got a t28 turbo it on 10psi atm, il do a vidio an show you what it goes like cheers

  • @bikesmad if everything else is standard apart from your turbo you can run it at 12psi safley, anything above is a bit of a lottery with your engine. have you got a manual boost controller? if not i would get one and do away with your standard bmv to get the best from your turbo.

  • Hi what turbo have you got on that? Wb cheers

  • @bikesmad hello mate, the turbo when i did that vid was a t28 pulsar turbo, its got a t4 turbo fitted now, branch manifold and a k7 box. i will do another vid in the summer when i get it out again.

  • @xazzmanx aww rite okay is hat standerd pistons? what boost you running it on?.. i just bought a t28 for my mg turbo whats the best turbo you would recomend? whats a k7 box? wb cheers

  • @bikesmad im running standard pistons at the moment at 14psi, but the i have had the head ported and running piper 270s through a big front mount. a k7 is a gearbox off a 220 coupe turbo, ideal ratios for a zr with a t16. a t28 is a good turbo with plenty of kick providing its off a pulsar not a 200sx and should see you run 280bhp nicley with the right mods to go with it. im running the t4 because i have done all i can without going fully forged which is coming soon.

  • Hey man, Is this the 1.4 ZR? Thanks and if so what mods do you have?

  • @mcmanus1806 its a 2 litre turbo mate, sorry cant help with any mods to a 1.4.

  • Sweet as man ;) cant wait to turbo mine. found a whole set up for cheap as chips!!

  • quick car mate! what fucking idiot reckons his 206 estate is quicker?! the fastest ive ever seen a french car move is when its going round a corner and the driver foolishly brakes halfway round - you have never seen something spin out so fast lol

  • I have a rover 25 1.4 16v, the bottom end in my cars fucked and it's managed to pull 120. When my insurance comes down in 6 months I will be getting a 1.8 MG ZR :P. I got goosebumps watching your video, car accelerates like fuck!

  • @smilie120 ..how is the hair dressing job going on?

  • @coltsuperocean10

    Pretty well thanks. How's being a colossal faggot treating you?

  • @smilie120 ....I wouldnt know? How is your Dad by the way?

  • well it has been said that peugeot did make one good car out of all they made, im suprised some one in this country got that particular one. three years and still going a, you probably just jinxed yourself now. lol.

  • MY PUG 206 ESTATE IS AS QUICK AS THIS

  • @MsFreemicrosoftpoint pmsl, the trailer pugs pull to carry all the bits that fall off make them slower for a start. post a vid though, i would like to see a rapid estate pug.

  • @xazzmanx lol.............had my pug 3 years not one thing wrong with it.........and it flies

  • i know, its a bit quick realy. can i have your engine coz mine scares me with all that power. lol.

  • lol how long did that take, try getting a real engine in it....

  • nice, i'm about to do this conversion to my 160, can't wait. was it difficult to use the 620 gearbox with it being a hydraulic clutch? also how hard was the wiring to do, all i'm waiting for is the 220 subframes and i'm going to get started. cheers bud

  • @willsnailum converting the ti box is very easy, all the fixing points are already there so all you need is the parts of any pg1 cable box. the wiring wasnt hard just time consuming, it took me about 7 hours sat on a stool under the bonnet before i put the engine in. i found it easier to convert the cars loom rather than making an engine loom, all you need is a ti wiring diagram and a 160 diagram. loads of info on rovertech about the conversion, well worth the effort mate.

  • @xazzmanx is there any way i could make the hydraulic box work or am i gonna have to buy a cable box? cheers

  • @willsnailum the box casings are all the same, its only the gear ratios inside and the clutch release type that changes (hydrolic or cable). all you need is the cable bracket and fulcrum arm of a cable box and put them on your gearbox. no need to get another gearbox.

  • very funny, holding at camera still at that speed is hard for anyone. you have obviously never been that speed in a car or you wouldnt be so witty. i dont need luck to top that speed mate neither, just a gaurentee of no coppers.lol.

  • not quite 150 was it? better luck next time when you've not got someone with parkinsons disease holding the camera

  • thats not too bad a bit sluggish from 120-150 tho....good effort tho

  • @cakey098 you knows it loser!

  • @cakey098 Wow thats so exciting...... ZZZZZZZZZZZZZzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzzzzzzzzzzzzzzzzzzzzzzzz­zzzzzzzz

  • @cakey098 ...Is that supposed to impress me? 103bhp?

  • why buy a scooby and this car can to 150

  • fab sound hoping 2 buy me first zr in new year

  • that is realy quick lol but i had 150 outa my 160 other day was well shock'd .all this satistic shite saying they top out at 131 lol

  • @NOWWITHTHENEW

    Your speedo is very broken.

  • @NOWWITHTHENEW Ah, but how quickly did you get there? :-)

    What really impresses me with this car is how quick he goes from 50-100mph without being thrashed. If only the T-series would fit in a TF, I'd be straight out to buy one!

  • @donkmeister lol not quickly but id did get there lol

  • did u buy the car with the converison allready done or done it yourself ? am intrested in doin the same would like some info if u got any :/

  • @badtothebone73 i bought the car as a 1.1 rover 25 and did the conversion over the winter in my spare time. well worth the effort, make me smile every time i drive it.

  • @xazzmanx what engine did u use for the conversion ? how did u go about wiring up the ecu loom ? is it a complicated conversion ?

  • @badtothebone73 the engine and gearbox came out of a 620 ti, the conversion itself is fairly straight forward apart from the wiring. i used 2 wiring diagrams, one for the 620ti engine loom and another for the rover 25 loom. i found it easier to alter the car loom to fit the ti engine loom rather than the other way round like others have done, well worth the effort though mate. have a look on rovertec, theres loads of info on there.

  • i mean these alone would make the car pretty beasty but i Xazzmanx prob got weight reduction n mayb a meaty turbo ;) video's real m8, wish my zr was that quick!!

  • coltsuperocean, mate.. SDI's, k&n filter and decat, mafam change and an engine remap on an mg zr diesel knocks the torque ABOVE 250lbs/ft. for a few hundred quid. Bargain on a massively devloped l series engine so SHH! and go do the homework

  • coltsuperocean, mate SDI's, k&n filter and decat, mafam change and an engine remap on an mg zr diesel knocks the torque ABOVE 250lbs/ft. for a few hundred quid. Bargain on a massively devloped l series engine so SHH! and go do the homework

  • coltsuperocean, mate SDI's, k&n filter and decat, mafam change and an engine remap on an mg zr diesel knocks the torque ABOVE 250lbs/ft. for a few hundred quid. Bargain on a massively devloped l series engine so stfu! and go do the homework

  • fake!! No rover old mans car can do 150 mph, that should be kph surely. I like a laugh, but that is ridiculous!! Old age pensioners doing 150 mph? Dont be a cunt! 

  • @coltsuperocean10 the only fake round here mate is you, take those knickers of your head and stop talking like a cunt. theres always one little boy who thinks he knows better, if you grow a pair and come over i will take you out in it. put a fresh nappy on first though, i dont want you dribbling out your knickers as well as your mouth. what you got? a fez maybe or even a panda, some thing thats equal to your manhood no doubt so im suprised its even got an engine.

  • @xazzmanx Seriously, I would love to take you up on your offer, but Ive got my street cred to think about. I cant be seen in a Rover, id be too embarrassed for one thing. What if I got seen by someone I know? I would die of shame!

  • @coltsuperocean10 i can see you wasnt joking when you said you like a laugh coming out with a comment like that, street cred you! pmsl. boys with no toys aint got street cred to lose, please mate keep replying as my side are killing me here with the crap you come out with, does you mum know you play on the computer when you supposed to be doing your home work for school.

  • @xazzmanx FOOKIN KIDS LMFAO

  • @coltsuperocean10 coltsuperocean, mate.. SDI's, k&n filter and decat, mafam change and an engine remap on an mg zr diesel knocks the torque ABOVE 250lbs/ft. for a few hundred quid. Bargain on a massively devloped l series engine so SHH! and go do the homework

  • @xazzmanx ...hello dickhead!! Its been a year since I last spoke. You still driving that gay fuckin mg hair dressers car?

  • @coltsuperocean10 argh cheif cock, how you doing? you back for another slapping down, thought you would have learned the last time round. yep still got the zr, running a new t4 turbo and branch manifold now aswel so is alot faster than the vid you keep creaming over. if you want some more matterial to knock one out over ill send some pics and vids through for ya. you love my zed dont ya, how many times you watched the vid now? and still replying aswel. your old ford still running?

  • @xazzmanx ... hahahaha you still got that piece of shit and still proud? Sorry you fuckin old man loser, but I coulnt give a fuck!! I took the piss out of your sad old car, and you still replied a year later (albeit with shit English, are you that stupid?) You really have been made to look a proper dickhead! 1 year and you still took the bait? How stupid are you? ..seriously how stupid are you?

  • @coltsuperocean10 argh little fella, its really got to you aint it. one day when you grown out of nappies and left mummy and daddy you will be able to afford a car too! until then just keep watching my toy do speeds you can only dream off doing in your pram. i get emails when people post a comment, you on the other hand had to find my vid again and post another reply telling me you really are hard up and have no life at all. knacker, you keep trying to look good and i will keep slapping you down

  • @xazzmanx ...slap me down? Hahahaha what in a Rover? Dont make me laugh little boy.

  • @coltsuperocean10 i dont know why you bother replying really coz all you do is spit your dummy out when you end up looking a dick and cant reply with anything witty, suck it up liitle fella and put your money where your mouth is. like i said last time, when you pass your test and can afford anything that you think will stand a chance you give me a bell and we will see how slow a rover is wont we. now i can hear you mummy calling again so be a good boy and go get that nappy changed.

  • @xazzmanx .hahahahaha its a piece of fucking shit rover!! I would rape your little chav car with ease! 

  • @coltsuperocean10 rape my car! i knew you was a bit of a retarded mummys boy but that takes it to a whole new level. fuckin weirdo, takes all sorts i suppose. i just looked at all your posted vids, why aint you posted any of your dreamed up car. is it maybe because your full of shit and dont own a car, probably. now go a wipe your chin coz im sure theres some shit drippled on to it from the amount you come out with.

  • @xazzmanx hahahahahaha typical childish fuckin chav cunt!! You cannot come to terms that someone might just drive better cars then a little boy like you. You are the sad pathetic little cunt!! hahahaha come back at me when you get atleast 1 car with 400+ bhp. Hahahaha if you want anymore comeback from me, go scrape it from your Mums chin!! hahahaha little pathetic hairdresser!

  • @coltsuperocean10 oh steady little fella, no need to cry about it again. you do get upset dont ya, cant you think off anything better to say than that dribble you come out with, you really are hard up on the grey matter aint ya. 400 bhp plus a, im still waiting on your dreamed up motor to appear in a vid. now off ya go and see if you can come up with some more shit, shouldnt be to hard really coz you do appear to be full of it dont ya. i got to go mate coz your mum wants paying before she goes.

  • @xazzmanx ...Ive told my Mum she really doesn`t need to work, but she does her bit for the disabled. I hope you get better soon retard. hahahahaha pnkd you again!! Rovers are good cars for spastics like you!! Hows YOUR Mom, still got my jizz stains on her face? hahahahaha you pathetic fuckin middle aged man. You are 35, and you are pathetic. hahahahaha get yourself laid, lose your virginity you spastic loser.  Do you really think I give a fuck about your Rover??

  • @coltsuperocean10 mind your step there fella you got quite a pile building up in front of you, im glad you still live with your mummy and give her advise on how to live. strange really as she dont need advise when shes laid under her customers, come to think of it your probably the son of a client. a paid for knock back of society with a loose mum, well done mate give your self a pat on the back for yet again making yourself and your mum look like cocks. of to bed now little baby, mummys calling

  • @xazzmanx ..hahahahahahahaha .well none of that made sense because you are a simple rover driving cunt. You drive a rover. Enough said really. You are the poorest cunt of the poorest fucking chavs!! You need to deal with your poor life the best you can!! hahahaha Lets bring in down to FACT!! You drive a Rover. End off, you sad cunt!! Only a sad fucking cunt like you at 35 years old would want to act like a special needs twat!! hahaha pwnd again old man!! 35 ? You sad old loser!!

  • @coltsuperocean10 now little tit sucker, 90% of what you said was a reflection of what i said to you. if your gonna play with the big boys make sure and use your own insults. what a twat, only words you know is haha and cunt. never mind little boy you cant help it really coz your mum was a cock sucking whore and you where the offspring off one night of proper sex rather than the anal she is used to. if you cant post a vid of a motor that stands a chance please shut the fuck up you retard.

  • @xazzmanx ...hahahahaha and that is why YOU drive a Rover, because you are a retarded fuckwit that knows no better than thinking throwing insults is an intelligent thing to do. hahaha you sad pathetic loser. You will be a loser all your fucking life. Good luck with that crappy piece of shit you sad hairdresser!

  • @coltsuperocean10 has mummy took you out the pram for a play on the computer and an afternoon titty suck, poor little baby hungary was you. listen, your borring me know with your low vocabulary and same old shit so off ya go little boy.

  • @coltsuperocean10

    Congrats, you're the biggest idiot I have ever seen on youtube.

    Grow up.

  • @kzruns hahahahaha nice one dickhead!! What do you do? Oh play games all day!! YOU need to grow up loser!! Hahahahaha thats your 1st troll dickhead!! I will be counting fuckwit!! I will embarrass you! Now go to bed dickhead!

  • Don't be upset, keep working hard big guy and you might one day be able to afford a car that's not an 80s Honda cast off 

  • @craigzetecs ah mate, do you really think this is my only car! if i was to sell my main motor i could buy one of your cheap rs500s and still have change for the extras, if you would like to see my other cars just say and i will post a vid including log books as proof of owner ship. is the old ford your only motor? probably is which is a shame coz you probably worked and save all your life for, well lets face it, an essex boys dream and yours buy the sound of it and its still only a ford.

  • I would like to see your other cars, please post videos and logbook details of all your vehicles :-)

  • @craigzetecs why are you here just to bitch about a car designed and built in britain something very rare nowadays you should be proud of what this country used to produce they are great cars if you get past the bad press relating to early rover cars you should try one it would run rings round a ford infact most cars short of a lotus round any corners, the car comes standard with a k-series lightweight engine that has won awards and was said to be 15 years ahead of its time

  • Danny predictive text, Honda concerto, you get the message 80s boy, do you listen to bross and Diane Ross as you drive around?

  • Respond to this video...and as for that comment you seem to know more about that than me dont ya little mate, you keep pretending you got some thing special there a. if your confident in you motor post a vid then grow a pair and meet for a little play.

  • Anyway talking mutant car perhaps you should research the rover 200 which started life as a joint developed Honda converto, civic, rover 200 in the mid 80s. In fact your front and rear suspension, hubs brakes, steering components ect are joint honda, rover. So basically your in a brightly coloured Honda converto, nice

  • @craigzetecs you said it there mate, joint effort not stolen from another manufacturer like your engine. ive never seen that engine in any porsche, would you care to elaborate.

  • Are you referring to my 5 cylinder engine that wad originally developed by Porsche? I see no problem with it and everyone seems to agree its a great engine

  • @craigzetecs no problem with the engine, ford couldnt build a decent one so stole someone elses. if porsche built the engine perhaps you better tell that to volvo, i cant say i ever seen that engine in any porsche.

  • Actually kids my username is years old, I now own a mountune focus rs so hush up children

  • @craigzetecs oh a ford focus, oh dear and you said my car was tragic. at least my cars all one make not made up of two, the engines not even a ford one. ant time you fancy putting your interbread motor up against mine mate you give me a shout.

  • Oh dear what a tragic car.

  • @craigzetecs only if you try keeping with it friend.

  • @craigzetecs Way better that zetec s i know i own a bastard zs

  • valla mierrda

  • valla mierda

    

  • VALLA MIERRRRDA

  • I also have a mg zr 160 and it does not give mas that problems, k if of meeting and of to, up to the woodpecker it gives problems, fences in shit

  • valla mierda

  • @polvorillento english chap! dont do foreign.

  • @xazzmanx I also have a mg zr 160 and it does not give mas that problems, k if of meeting and of to, up to the woodpecker it gives problems, fences in shit

  • @polvorillento mate, i cant understand a word your saying. its all jibba jabba.

  • well nice car

  • but still it remains a rover

  • @dabellend the car in front is a rover, always.

  • only on council housing estates where that's all the people can afford. or the scrapyard

  • if im in front of you which lets face i will be that must mean your old heap is in rthe scrap yard too, right where it belongs. infact my cars only in the scrap yard in front of you coz i towed you there when you blew you little engine up.

  • shame its still a rover,

  • tell me, what car you got thats better? im interested to know that from a comment like yours.

  • well it's only slightly better but i have a 2007, APR tuned, S Line audi A3 2.0T FSI running 256 hp and 303lb-ft. of torque, 19'' RS4 wheels, full milltek exhaust, full leather, eibach coilovers, xenon lights, tints etc. do u actually believe your car is that great, i was just implying that, allthough your car is fast, its still poor quality rover parts/engine with weak headgasket + clutch. and in general MG's/Rovers get no love beyond the mcdonalds carpark crew. but remember its just my opinion

  • the amount of money spent on your car for so little power in my opinion is very poor which makes my car far better value for money with more power. i dont do mc donalds only totb and trax so there opinion doesnt rely matter to me, you never know we might might meet at a track day event so you can get the chance to prove your cars worth, but with only 250 bhp it doesnt look good. but remember its only my opinion.

  • i suppose it depends what you want from a car really. looks like u have gone 4 all power,+ succeeded, whereas i use my car everyday, for work meeting customers, long journeys, picking up fit girls etc lol, audis get a lot of respect in most scenarios. + yes with only 256bhp, its not a world beater, but a great improvement from 200bhp standard + is great fun + can hold its own. maybe ur car would b slightly quicker than mine, but @ the finish line mine would get all the love. ud geta 65yr old man

  • by the time you get to the finish line i would of had all the decent birds and left you with all my cast offs, i would even be nice about it and call the aa to fetch your car thats more than likely blown up trying to keep up. lol.

  • just my opinion though :)

  • dont walk the walk if you cant prove it

  • @dabellend. Theres no shame.

  • Very nice my man! hope it was done safely and not on public roads ;)

  • all done safely on a track day event.

  • i was acually very suprised at how slow these are when i raced one last night

  • i suppose it depends what car you got, mines not standard by any means and quite easiely sees of my mate dynod 400bhp scooby.

  • serpose your right mate

  • nar man just pure physics yo i can get 150hp out of a 800c daewoo matiz bruv just slap on a turbo from a dyson on it

  • a now theres a plan, im thinking maybe an upgrade to a t38 dyson now. lol.

  • egsactly what i was thinking :S

  • yo bruv ye ma skoda 1.3 twin turbo twin charged powah house fookin faster dan dat rova u got yeh

  • can i have some of those drugs your taking mate,must work well init bruv.

  • yo tengo l 160 y no zumba tanto.k le as exo?

  • cv???

  • I on my second MG ZR, first one was a ZR+105 and now I have a 1.8vvc 160+. Love the ZRs, I have the uprated head on it as well. Still lacks the power thou only got 135mph but still had more to go but the A130 is not a good rd for that speed

  • CV?? CENKIU

  • too much torque cause te clutch slip ?

  • yep, the clutch was supposed to be able to handle 300bhp. outcome is it cant, sorted now though i had a kevlar one made up.

  • my bros puttin a rover 800 v6 turbo in his zr at this moment ;)

  • glad you still have the car mate gotta love that speed man :D

  • yeah the speed is mad :P

  • would i be able to get an mg zr for my first car .

  • my bro did and insurence costs him a bomb lol

  • Is that a standard t16tii ? Or have you upped the boost?

  • 150 plus....good effort.

  • unreal boi i have a zr but it still stardard id love da turbo tho nice vid

  • i have had gasket updated no probs brillent!

  • Hey dude, have you had the head gasket uprated yet?

  • that was done when i rebuilt the engine before fitting it, so far no oil leaks. lol.

  • bloody hell skin thats silly quick

  • This is great mate, im currently in progress with doing my zed. at the moment the engine has been rebuilt.

  • i've seen this car in lincs. fucking awesome! nothing can touch it. nice car mate. job well done

  • hey man .thats serious quick ive got a zr 2 and am dyin to get a turbo engine for mine can u tell me wat car u got the engine out of and im gna make a list of the other stuff u did 2 id appreciate it if ud email the stats and details of it coz no1 kinda wants to help me and id jus love to get the work done. cheers

  • wot engine did u drop inside ur zr cos ive got a 160 but defo want it turbo'd.. how much did it cost and how do u recommend doing it ?? thanks

  • the engine and box was out of a 620ti that i got for 250 quid, defo worth rebuilding before putting it in and doing all the mods that you can afford. the jobs a fairly long prosses but worth it in the end, take your time and be patient. look at my other replies to see the mods i made before fitting, luckily im a mechanic so didnt have to pay anyone to do it other wise it would have cost me a fortune.

  • k beats mine lol

  • have you had the car on the rollers yet fella? if so what results did it get ?

  • not had it on yet mate, im going upto roger clarks in a couple of months with my mates scooby so i was thinking of getting it done at the same time. i will post the results, should be interesting results as i had a little play with a mates 350 brake scooby the other day and past him on the straight.

  • dats fkin quick is it a lot of work dropping the engine in and will you be selling the car?

  • its not a straight forward job like some people would have you beleive but its well worth the effort when you feel the power, sorry mate the cars not for sale.

  • wel if you ever do come to selling it let me know please mate.

  • jelous people cus zrs beats all cars in there league an 1.6 to 1.8 i no soo cus i got one!great cars wouldnt change it 4 nufin!!

  • WOW that is shocking performance! What an engine!

  • ...I was watching an Alan Partridge vid and it linked me to to this shit video!! rubbish old mans car!!

  • i didnt think wankers and dumb fuckers knew how to use a computer, you last comment has just proved me wrong.

  • ...xazzmanz... I can use a computer (as you say haha) but atleast I wouldnt dream of buying an old mans car!! hahaha fucking rovers are proper laughing stock!! I think the dumb wanker is you!! hahaha

  • well little fella first things first, theres an x at the end of my user name and not a z so that tells me you are a dumb fucker and cant use a computer. next you must be a wanker for watching a video of a car you dont even like, and as far as calling it an old mans car i would gladdly put it againts anything you drive. thats if your even old enough to drive off course.

  • haha i think that prick just got owned i own a rover 25 and wish i had that engine in i only have a 1.6 :(

  • y clik the video if u think these cars r rubbish n e ways?

  • says all the young people who drive's ZR's old gats drive the 75 FAGGOT.

  • thats a machine that is

  • es el 160??

  • hello mate, no it is a t16 2.0l turbo engine.

  • now wow that is one quick motor lol how much you spent on that beast mate?

    im bionic on mg-rover btw :)

  • thanks mate, im glad you like it. its not to bad really cost wise coz im a mechanic by trade, it stands me at 5k including the car. not bad for a motor that sees off sti scoobys with relative eaze.

  • is it a standard t16?? or has it been modded? if so whats been done to it??

  • its not standard mate, lightened and balanced bottom end including flywheel and clutch, decked blocked (only 2 thou), all new shells and rings, new oil pump, ported head, 270 piper cams, vernier pulleys, t28 turbo (pulsar), front mount intercooler, 3 inch straight through exhaust, closed cold air fed induction, iridium plugs, magnacor leads, uprated bearings for the gearbox and racing clutch. more to come as well when funds permit.

  • holy fuck that is rapid!

  • FUCKIN fAST!!YEAH MAAN!!

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list