Sideshow Collectibles 1:1 Life-Size T-800 Endoskull

[jam11978]

then give him pink teeth



[jam11978]

might spray mine black

[jam11978]

he is a bit red eyed must be that crack

[sapher974]

A robot don't need a head like a human

[jacoblattimore2001]

is the t-800 on crack or is he watchin robot porn

[GnasherGawdGow321]

why do cats purr?

[Deathbringer99699]

those things.. always keeping the smile.. even when they terminate you.. motherfuckers!!..

XD

[TheOriginalGayman]

you got a huge bicep!!

[JayPenrake]

you should brush his teeth!

[RobotOnLine]

@JayPenrake OK, what about flossing?

[JayPenrake]

@RobotOnLine he he!

[jam11978]

@JayPenrake done the same cleanes round the base with nail varnish and found some marks i believe they were the chrome ones but painted as combat so i customised mine with skynet decal;s around the base in blk and i have used nail polish non aceton around him to go half and half it looks mean how a real combat job should cheers kev.

[RobotOnLine]

@jam11978 Half and Half is the way to go in my opinion, well done!

[JayPenrake]

@jam11978 cool.

[jam11978]

@JayPenrake i use some colgate lol

[jam11978]

@jam11978 or i might give him a floss

[jam11978]

@JayPenrake he has better teeth than myself

[KnewingFun]

just clicked on this for fun cuz the darth vader mask was scary but this is also

[LiteracyLabyrinth2]

Nice piece. Certainly looks better with shining finish. Do you have any photos of how it looked before you shined it to compare?

[RobotOnLine]

@LiteracyLabyrinth2 Sorry no but you might find some on Sideshow's website

[drawexplosion]

his shiny at 04:57

[Adu2Adu]

what a smile the terminator has

[RobotOnLine]

@Adu2Adu All those explosions and not a chipped tooth in site :)

[Kooseandco1]

@RobotOnLine do you actualy have a whole lifesized figure or just the head?

[multicatlicker]

try the harvester :D

[ransom1wi]

cover it with a nice clear coat or the crome will wear off over time. its just its plastic so the crome paint never stays

[TheSeventhGuitar]

I tried to "make my own" once, tried to mill it out of aluminium.. now that was a headache. First, I had to get pictures from every angle, then in a CAD program, trace every line and so on.. Then give it depth (so the CAD program could do all measurements for itself). I only managed to do the top and back of the head, then I decided to look for one on eBay..

[RobotOnLine]

@TheSeventhGuitar Yeah that was a big task by the sound of it, but at least you tried!! :)

[anjodelta2]

país do caralho éo Brasil porque não tem essas coisas aqui...ahhhhhhhhhhhhhhhhhhh que vontade de ter um

[RobotOnLine]

@anjodelta2 Desculpe, eu não estou com você?

[Skyrodude]

You mean Endoskull.. IDIOT!

hahaha ;p

[beerdeddi]

The two dislikes are Sarah and John Connor!

[B1gBoss100]

I recently ordered a supposed chrome version on eBay and it took the seller over a month to ship it out and it arrived completely broken. I can confirm to you that the braided hoses are make of thick plastic tubing covered by braided thread. Fortunately eBay refunded my money and I was able to purchase another one which I am expecting to arrive next week. I will post a video next week hopefully.

[RobotOnLine]

@B1gBoss100 Sorry to hear about the Endo bust, hopefully the new one will be perfect!

[SteveSabbai]

@B1gBoss100 ...thats why i dont shop on Ebay...

[gypsycatcha]

I got mine the other day too. Its so so much better in the flesh ( well, kinda flesh)

I cleaned mine using nail varnish remover. Looks great. This was the vid that swayed me to get one.

[RobotOnLine]

@gypsycatcha Glad this video came in handy ;-)

[mytommyland]

just curious if this combat version has a power supply or if it is battery operated only? i am considering buying this guy and wanted to know as it seems the toynami's eyes automatically fade away at the end of the theme music. I really wanted one that you could keep the eyes on and not have to worry about chewing through batteries every five minutes! My battle damaged iron man has both options of power supply and batteries. Awesome videos man, keep on collecting!

[RobotOnLine]

@mytommyland Mine is all packed way at the moment but as far as I remember it's just batteries only, no option for a power supply.

[smiff198907]

hey buddy, finally got my hands on one of these, just wondering if there was any way of changing the LED lights in the eyes? any ideas pal, great video i too have cleaned him up, thanks for the tips

[RobotOnLine]

@smiff198907 Sorry I wouldn't have a clue. Is there something wrong with the original eyes?

[smiff198907]

@RobotOnLine thank god no, there is not a problem, i was just wondering incase the time ever came, i paid alot for this guy but he is worth every penny, thanks alot for the reply and keep the great vidz coming, they are very inspiring, i collect hot toys 1/6 figures, but now i have this guy, i'm swaying towards getting some more pf's and busts. By the way are you a "brummy"

[RobotOnLine]

@smiff198907 Yep, originally from Wednesbury ;-)

[smiff198907]

@RobotOnLine haha cool cool, my bro's misses's brother speaks to u on here apparently, or watches your videos anyways he has quite a few premium formats so i have hurd, great collection mate, very inspiring, as i keep saying haha. Take care

[ArtDerek]

what is that made of?

[RobotOnLine]

@ArtDerek Polystone

[Peacefulhumanbeing]

@RobotOnLine I thought this was metal!

[kyatos77]

Thank you very much for your tips, i'm from italy and i'm going to clean my combat version when i'll receive it. i'm little scared about wich cleaner i have to use... please could you tell me material reactions to your cleaner? are the same on polistone and metal too? did you lost some chrome parts while removing the weatering effect? thank you again for your review ;)

[RobotOnLine]

@kyatos77 The cleaning fluid I used was very mild and did not cause any damage to the chrome.

The chemical I used was Avery Surface Cleaner, try ebay.

I hope you enjoy your new Endoskull

[LifeSized101]

I like the 50/50 look, great review 20days till I get the T-700 bust which I hear is numbered.

[RobotOnLine]

@LifeSized101 Hey great news, look forward to seeing the review ;-)

[midgetmarine2]

damn man you must have a shit load of cash my god that stuff cost a load and you got a ton of em

[MetalAaron]

Mate what window cleaner did you use? I'm in the UK too so could get it

[RobotOnLine]

@MetalAaron Actually I used something a little stronger than window cleaner, it was called "Avery Surface Cleaner"

Try googling it, good luck.

[ClaW177]

Where do you get the frigging money?!?!?!

[RobotOnLine]

@ClaW177 Top secret ;-)

[ClaW177]

@RobotOnLine

Aaaaaaaaaaw, please tell me

Are you some secret bank robber?

[RobotOnLine]

@ClaW177 No I only rob banks Thursday's and Friday's.

[ClaW177]

@RobotOnLine

How exactly give me your master plan?

[CollectionReviewer]

This has to be one of the coolest props made by sideshow, I bet its one of the talking points of your collection. Do you think they would ever do a lifesize version like they did for c3po and rsd2

[RobotOnLine]

@CollectionReviewer They already do, if you have $6000 to spare :-o

[deanknight333]

this vids been keeping me going lol, going to make my final payment on him next month! cant wait to get him, wanted this for years! going to clean mine up aswell but not all the way.

[RobotOnLine]

@deanknight333 I take it you ordered direct off Sideshow then, FlexiPay?

[nippletease]

i want it.. i saw it when i went to a comic con in nyc.. n .. i cumed my panties

[beerninja88]

The teeth on yours are so much better than mine and I have the same model. Did you clean the teeth or scrape any excess molding off somehow? Some of the teeth on mine are stuck together with yellow globs.

Also what did you rub it down with? What kind of buffing pads?

thanks

[RobotOnLine]

No, I didn't do anything with the teeth, that's the way it came.

I didn't use any pads, just some soft tissue and then some Avery Surface Cleaner. We use this chemical at work, it seemed to do the trick.

[TOYMASTERFUL]

It's funny but I always thought they had metal teeth and not white pearlies.

[RobotOnLine]

I think it's the T-600's that have metal teeth.

[johnnyr2525]

I bought this tonight because I watched your review that you could clean it. Thank you so much for this review. Very helpful

[RobotOnLine]

@johnnyr2525

Glad you found it helpful, look forward to seeing you video.

[spar7an168]

I JUST cleaned mine, it looks MUCH better now!

[RobotOnLine]

These combat versions clean up really well, glad it turned out OK for you.

[spar7an168]

Thanks.

Yes, it came off very easily indeed! I did keep some of the scorching on the base though, because after all, it is the combat version.

[Primetome]

Awesome, Thats so cool. I really love that!!!!

[RobotOnLine]

Thank you ;-)

[crazyryryryan]

one question: are you planning on getting the endoskeleton or are you happy with just the skull? the skull looks awesome regardless!!!

[RobotOnLine]

Too expensive ;-)

[o7levi]

Wow.. I just recognized a part they used on the inner part of the right side of the skull, it's from a 1/35 Tamiya WWII 88mm Flak kit.

And by saying that, I probably just proved how much of a nerd I am..

[RobotOnLine]

I haven't got a clue what that it, but well spotted ;-)

[kingjoop]

nice review, thanks!

[RobotOnLine]

You are welcome ;-)

[killuminatii1]

U made that? Damn respect for you

[RobotOnLine]

No I didn't make, it's from Sideshow.

[WilliamAdolfsson]

That most be a pain in the a** to make

[john5629az]

As my suspicions! Not there would be then a endocranium made entirely of metal? I'm sorry so many questions, the fact is that I wore old questions about the endoskeleton.

[john5629az]

Please answer me, I have little doubt about this endocranium before purchasing it: it is entirely made of metal? Your jaw, eyes and neck are mobile? Please need this information! I really enjoyed your video, it is one of my favorites.

[RobotOnLine]

No this is not made of metal, it is made of polystone and then chromed ti look like metal.

This has no moving parts apart from the removable chip in the head.

[Csanad121]

from where do you have this???is awesome

[RobotOnLine]

It was bought from Sideshow direct.

[warcc]

People and there greasy f--kin hands man !!!

[RobotOnLine]

Yeah it's a pain, I keep it behind glass these days though.

[warcc]

I basically ment you should wear gloves, your hands have salt ect not good for things especially car headlight globes on instalation!!!

[FxHamill]

Great review I will totally agree it should be left some degree of battle damaged, since that's what it says in the bottom of the bust. It would be silly if it's 100% clean and says combat edition on the bottom. I just ordered mine, arrives within 10 days, probably the very last ones to get on retails, but I will also clean it up a bit. I got this Amway cleaner stuff, I use it for Lcd tv screens, but I know nailpolish remover will get everything off from the bust, so not gonna try that one.

[RobotOnLine]

Good luck with the clean-up, try a small area at the back of the bust first.

When you've done the whole thing, buff it up with a dry soft cloth...should look awesome.

Look forward to the review Niko.

[crazyryryryan]

awesome review! i just ordered mine two months ago and should receive it sometime in November. i have a question regarding the clean up of the endoskull. what kind of window cleaner did you use for your endoskull, or does it matter? also, awesome collectibles from sideshow!

[RobotOnLine]

Any mild cleaner will do but always try a small are around the back first, just in case there is a problem.

You could try Amway as the guy above mentioned, although we don't have this in the UK so I'm not sure how well it will work?

[crazyryryryan]

how much amway or any other window cleaner should you use on the endoskull?

[RobotOnLine]

Sorry I don't know, just try a bit to begin with and see how you go.

[west9009]

Nice review... I'm thinking of getting one of these! Are the eyes illuminated with LED's or conventional bulbs?

I'd like to leave the lights on for long periods of time, so I hope they're LED's...

[RobotOnLine]

They appear to be some sort of heavy duty LED that I would expect to see on factory machine.

[holtrax2009]

very informative vid. thanks! Off to clean the endo now lol!

[kenzidisa7]

cooooooooooooolllll!!!

I like the eye turn off slowly like in the movie, if the terminator dead, and very expensive cool figure !!

can the mouth open ?

[RobotOnLine]

No the mouth does not open.

Thanks for the comments :-)

[lennonmccartneybeat]

how much was this certain skull ?

[RobotOnLine]

To buy one now it would be around £400 - £500

[chesseburgerman1013]

awsome collection bro youve got so many how much did they all cost you?

[RobotOnLine]

Thousands.....I'm skint!!

[venomfanatic]

i just uploaded the video with mine endoskull from hollywood collectibles

[Dean8595]

great Review like the half and half look too and i have a question as you cleaned

him a little bit up only on several sites or 

Simply wipe? because i have Preorder one.

[RobotOnLine]

Hi Dean

I am not sure if I have understood this question correctly but if you are asking me weather I have used some sort of abrasive pad then the answer is no I have only used a simple soft cloth with a gentle cleaning liquid...hope this helps?

[sanix85]

класс

[RobotOnLine]

Спасибо

[lazarush1980]

I really love all of your reviews mate - you are a true collector in the very essence of the word:) i havent started collecting busts yet from SS due to the negative reviews i see in forums etc - so I tend to stick with the PFs - tell me - what camera do you use - the zoom is a nifty little feature!

[RobotOnLine]

I forget the actual model number but its a Sony HD camcorder with hard drive, I picked it up about 12 months ago

[venomfanatic]

man i found him too.and think that there was only one in greece.i'll review him soon

[CHUUMPASS]

what is the weight of that beautiful skull model.

[Acid346]

you can also turn the hatch in the top of the skull like the 2nd movie

[H34DSHOOT3R]

Hi RobotOnLine,

very nice review! Your Endoskull looks really good.

Please, can you tell me how you clean it? Is the window cleaner not dangerous for the paint?

It would be really nice of you, if you could make me a little tutorial! ;)

Thanks!

[RobotOnLine]

grazie

[Darius12235]

dude window cleaners and other stuff are agresive dont be surprised if paint starts to get removed off your figures.

[matschgo]

i paid 550€ ... but not @ ebay... there are still some shops out there (Germany) which have it in stock! Last week i also got one of the T-800 1/4 Schwarzenegger Premium statues for under 200€! This one arrived today and it's absolutly amazing! But i still wait for the arrival of the Skull :(

[Sandtrooperbsa]

how much does it cost?

[RobotOnLine]

they go for about £500 - £700 off ebay

[Premium97]

You should pick up anither one and modify it to with some clay sculpting on the face...or have some dents on it to show more of a battle damaged version.

With the scorching, use a BBQ flame lighter to scorch in the burn marks...hehe :))

[RobotOnLine]

With how much these things cost I think I'll pass on putting a flame to it }-)

[matschgo]

This thing is absolutly stunning... yesterday i ordered one :D btw: nice review! ... helped me a lot with the decision to order one or not ;) ... finally i did it =)

[RobotOnLine]

Glad the review came in handy, hope you enjoy your new bust.

Did you go for the Combat version?

[matschgo]

yes, the Combat Veteran =)

[comexland]

The reviewer's biceps are Arnrie-esque.

[RobotOnLine]

lol...thanks well I try....well I've been trying for 25 years but my bones and biceps are now starting to hurt a little }-)

[CaseyNunezFanboy]

is it just me or is this thing one of the best collectibles ever?

[J0Hot]

Very Nice Review and nice Collection.I'm 18 and so i don't collect very long(since 3 months).

I will soon make a review of my Sideshow Rocky bust and Sideshow SAW 1:1 doll on tricycle.I have the opportunity to get this piece for 530€.Is this a good priece?What do you think about the upcoming Godfather Bust?

greetz from germany

[RobotOnLine]

530 Euro is not over priced, seems about right for the Endoskull.

The Godfather bust looks a little too shiny in the pictures, perhaps that will be fixed by the time it's released, I'm more into horror and Sci-Fi collectibles so it's not one I'll be going for anyway.

Thanks for the comments,look forward to your reviews (:-)

[0505dry90]

is it made of real metal ?

[RobotOnLine]

It's main from polystone with some small metal components.

[0505dry90]

whats polystone ?

[JamboyStu]

That's the best terminator skull I've ever seen.

I love how you can even take the cpu out.

The eyes also look very real.

[RobotOnLine]

Thanks, I'm very pleased with him.

[1988martin]

i would sell my soul for this piece of awesomeness!!!

[RobotOnLine]

I think that's about how much they cost now it's sold out :-)

[tkcwu]

$2000USD

its yours shipping included.

let me know ASAP

[knightslade2007]

great job man !!

looks fantastic!

[Newtamaki]

sweeet

[RobotOnLine]

Thank you :-)

[kyleashley]

Thanks, ill probably never get one.. . this is nearly as good as owning ine...... one for da fans..

Thanks...

[RobotOnLine]

Thanks Kyle

[zaqwertyuiopasdfgh]

could u please do a

review on your arnie statue

[RobotOnLine]

Ye sure, I hope to do a couple of reviews this weekend.

[brewt1mer]

i have the hollywood collectibles version and i must say that the sideshow version has better teeth.

[RobotOnLine]

They are very similar, I think the Sideshow version has a slightly thinner face as well.

[daliman11]

a nice piece - i like how you've buffed it up a bit - although I do prefer the clean version (even cleaner than yours is now)! Anyway nice review.

[RobotOnLine]

ye if I had my choice I would have gone for the clean version from the begining had it not been sold out.

Cheers

[raydvd]

looks superb !

[RobotOnLine]

Thanks

[keithstarwars]

very nice. I've been thinking of getting a star wars sideshow bust.

[RobotOnLine]

I think they have a few available on play still.

The Darth Maul was nice but sold out quick.

Cheers.

[oTHREATZo]

great review mate. could you do one on your alien figures? (Dallas and Kane)