@xxxAldenatorxxx thanks. And you are right. the only problem is i started this channel after i upgraded the gun. I had sold the barrel so that was kinda an issue :(
@bob505470 a tight bore is considered anything below 6.06. This gun comes with a 6.05. By definition this is a tight bore, but the rule of thumb is as follows. A stock barrel is not a tight bore unless its a custom gun.
@That70sFan492 This is a little of both. I was using a standard 8.4. With a 9.6 the rof goes up a lot. Since this gun has very heavy duty internals, you could easily throw a high torque motor or a lighter spring in to up the rof. This gun is also lip ready, so if you throw one of those in, it will easily spike the rof. I just tested it with what the gun came with so you know what you are buying
@AztecAirsoft Thanks but one more question, is the interchangable FPS spring in the gearbox or is it a quick change spring? Thanks man, loved ur review.
@TheCheungo No, its not a quick change. You have to take apart the gear box just like most other guns. Though you can put a 2 part gear box in for a quick change gear box and easy spring replacement
How far does it shoot, how accurate is it, and how much power does it have at it's farthest range? Lol I know its alot of questions, but I'm curious about it.
@HunterofDarkness283 its fairly accurate out of the box. with .25 gram bb's you can shoot about 150-200 feet. its somewhere around 500 fps. Upgrade the inner barel to a 6.03 and its the perfect gun
@EpicPancakeMix22 Its very similar to cars. All the customization and hard work you put into your gun is something that you end up very proud of. The upgrades that increase your weapons fps, accuracy, and rpm are always being compared to friends so the strive to be the best and to show off your hard work is usually the case
It looks like you know what the buffer tube is now, but you still don't know what the forward assist is. Most charging handles move back and forth but the m4's does not. If the bullet doesn't seat correctly when the bolt moves forward you can with other guns push the charging handle forward, but this doesn't work with the m4's charging handle. The solution was to add a button that the operator could push or smack to seat the bullet into place.
@x732ScOpElEsS I play big games with my friends and while refilling the mags there are about 20-30 black m4 mags lying around. The blue tape is there so i know which ones are mine
@Blackhawk3452 I know it's very had and I would defiantly make a video but the only problem is I actually wired this gun to the outside. The biggest problem is that i glued the bottom half of the rail to the top half. I would highly recommend re-wiring it to the outside after the warranty has expired. It is very simple to do. Just cut the wires and put them out the side hole. Then use electrical wire connectors and re-connect the wires. If you don't know how just ask your dad or grandpa to help.
@Blackhawk3452 I looked over the Airsoftmegastore page And I couln't find the specific model you listed. A link would really help. But looking at the items it will be very similar to this one with added parts. Some of the s-sytems there have upgraded scopes or other external features that raise the price and make the gun more unique. So no, I believe this gun is different.
@kxsteven4 I would say your choice would bank on what you want the gun for and how much you would want to invest into it. The m16 would provide u a bit longer range, but there is limited amount you can do to a jg. If you want a tac rail then go with the m4 s system because it has 4 rails for grips, flashlights, and similar things. but if u just want a gun to shoot it only matters for looks. both of these guns will be good for field but not the best because after all, they are jg.
@yum499 no, the only metal part in the stock is the buffer tube and the sling mount. The buffer tube is the inner tube where the plastic sliding stock is mounted on.
@AztecAirsoft Hey man if you want to get a better scope check out ebay! I bought a EOTech 552 holographic sight and a trijicon acog scope for cheap. They are from japan but still great. I've had my holographic for around 2 1/2 years now and my acog for a couple months. They run about 50-60 dollars usually if you get them from out of the country. It's up to you though. I'm just throwing out suggestions if you decided to get a different scope. Great review by the way!
@FireFighter8865 thanks for the advice, but as it seems this gun is now my secondary. i recently bought a acr and i am putting a b2 holo sight on that. but thanks a bunch for that. i might look into that for my other guns
@TheAmazinyason no it doesn't. to get to the barrel you have to push out the pin by the mag, then it just slides out. to open the gear box you must take both pins out. disconnect all the wires, unscrew the bolt in the back, and then unscrew the gearbox. screws hold the gear box together, not the bolt catch or charging handel.
@AirsoftCQB37 good choice, i just had a game with it today and it worked flawlessly. Also, i didn't mention the version 2 gearbox which is made like a kwa, not a half ass echo 1. Tell me how you like it after and feel free to ask about anything that was unclear or i didn't answer.
what scope is that?
AslanitheLion 5 days ago
@AslanitheLion its just a red dot sight made by diamond tactical. Sturdy, but cheap.
AztecAirsoft 2 days ago
Good first review.
But just one thing. If you want to upgrade your gun, please do the shooting test first, so we can see it shoot stock.
xxxAldenatorxxx 1 month ago
@xxxAldenatorxxx thanks. And you are right. the only problem is i started this channel after i upgraded the gun. I had sold the barrel so that was kinda an issue :(
AztecAirsoft 1 month ago
These come stock with a tight bore.........
bob505470 1 month ago
@bob505470 a tight bore is considered anything below 6.06. This gun comes with a 6.05. By definition this is a tight bore, but the rule of thumb is as follows. A stock barrel is not a tight bore unless its a custom gun.
AztecAirsoft 1 month ago
What kind of battery were you using for the firing test? The rof was slightly underwhelming and I'm wondering if its the gun or the battery...
That70sFan492 1 month ago
@That70sFan492 This is a little of both. I was using a standard 8.4. With a 9.6 the rof goes up a lot. Since this gun has very heavy duty internals, you could easily throw a high torque motor or a lighter spring in to up the rof. This gun is also lip ready, so if you throw one of those in, it will easily spike the rof. I just tested it with what the gun came with so you know what you are buying
AztecAirsoft 1 month ago
But are u sure that the FPS is really that high? AirsoftGI says its 380 to 420
TheCheungo 2 months ago
@TheCheungo maybe not for everyone, but when i took it to the field thats what it cronoed as
AztecAirsoft 2 months ago
@AztecAirsoft Thanks but one more question, is the interchangable FPS spring in the gearbox or is it a quick change spring? Thanks man, loved ur review.
TheCheungo 2 months ago
@TheCheungo No, its not a quick change. You have to take apart the gear box just like most other guns. Though you can put a 2 part gear box in for a quick change gear box and easy spring replacement
AztecAirsoft 2 months ago
Great review!
TheCheungo 2 months ago
How far does it shoot, how accurate is it, and how much power does it have at it's farthest range? Lol I know its alot of questions, but I'm curious about it.
HunterofDarkness283 2 months ago
@HunterofDarkness283 its fairly accurate out of the box. with .25 gram bb's you can shoot about 150-200 feet. its somewhere around 500 fps. Upgrade the inner barel to a 6.03 and its the perfect gun
AztecAirsoft 2 months ago
This gun looks awesome! im getting it for Christmas
EmuSonicxD 2 months ago
Why do people.show off their Airsoft guns?
EpicPancakeMix22 2 months ago
@EpicPancakeMix22 Its very similar to cars. All the customization and hard work you put into your gun is something that you end up very proud of. The upgrades that increase your weapons fps, accuracy, and rpm are always being compared to friends so the strive to be the best and to show off your hard work is usually the case
AztecAirsoft 2 months ago
How long do you charge the stock battery with the stock charger for that gun? I'll subscribe if you answer.
iSamPk 3 months ago
@iSamPk usually around 5 or 4 hours. I unplug it when it starts getting hot
AztecAirsoft 3 months ago
what kinda sight was that
moneybag11000 3 months ago
@moneybag11000 just a cheep red dot
AztecAirsoft 3 months ago
Are you wearing a teen titans shirt?
Aaron212444 3 months ago
@Aaron212444 no, we the kings. though now i want one of those shirts....
AztecAirsoft 3 months ago
To be honest, no one really uses that button on the real m4 that much, just like the airsoft version. NOW YOU KNOW, SON! Your welcome and goodnight.
ComeOnPelican91 4 months ago 2
It looks like you know what the buffer tube is now, but you still don't know what the forward assist is. Most charging handles move back and forth but the m4's does not. If the bullet doesn't seat correctly when the bolt moves forward you can with other guns push the charging handle forward, but this doesn't work with the m4's charging handle. The solution was to add a button that the operator could push or smack to seat the bullet into place.
ComeOnPelican91 4 months ago
@AztecAirsoft ?
x732ScOpElEsS 5 months ago
@x732ScOpElEsS sorry. message didn't send.
Np. and thanks for watching!
AztecAirsoft 5 months ago
why do you have that blue tape on the mag, whats its use?
x732ScOpElEsS 5 months ago
@x732ScOpElEsS I play big games with my friends and while refilling the mags there are about 20-30 black m4 mags lying around. The blue tape is there so i know which ones are mine
AztecAirsoft 5 months ago
@AztecAirsoft thanks :)
and nice review
x732ScOpElEsS 5 months ago
K I got the gun from hit guns but the battery Is nearly impossible can you make a video on it cuz it's really hard
Blackhawk3452 6 months ago
@Blackhawk3452 I know it's very had and I would defiantly make a video but the only problem is I actually wired this gun to the outside. The biggest problem is that i glued the bottom half of the rail to the top half. I would highly recommend re-wiring it to the outside after the warranty has expired. It is very simple to do. Just cut the wires and put them out the side hole. Then use electrical wire connectors and re-connect the wires. If you don't know how just ask your dad or grandpa to help.
AztecAirsoft 6 months ago
Aztec is this the same on as the $265 jg m4 s-system enhanced 2011 version from Airsoftmegastore
Blackhawk3452 6 months ago
@Blackhawk3452 I looked over the Airsoftmegastore page And I couln't find the specific model you listed. A link would really help. But looking at the items it will be very similar to this one with added parts. Some of the s-sytems there have upgraded scopes or other external features that raise the price and make the gun more unique. So no, I believe this gun is different.
AztecAirsoft 6 months ago
how is this gun because idk what to get ...this gun or the jg m16 ufc.. what do u think i should get??? for field
kxsteven4 7 months ago
@kxsteven4 I would say your choice would bank on what you want the gun for and how much you would want to invest into it. The m16 would provide u a bit longer range, but there is limited amount you can do to a jg. If you want a tac rail then go with the m4 s system because it has 4 rails for grips, flashlights, and similar things. but if u just want a gun to shoot it only matters for looks. both of these guns will be good for field but not the best because after all, they are jg.
AztecAirsoft 7 months ago
I believe the metal piece is the stock and the part you called the stock is the butt. I think. ;3
yum499 8 months ago
@yum499 no, the only metal part in the stock is the buffer tube and the sling mount. The buffer tube is the inner tube where the plastic sliding stock is mounted on.
AztecAirsoft 8 months ago
@AztecAirsoft than why were you- gah never mind.
yum499 8 months ago
Awsome :D wanna subscribe to eachother ? :D
DogGhost21 8 months ago
@DogGhost21 sure
AztecAirsoft 7 months ago
If i get this gun which i probably will, im gonna get the full metal version
XxHiGhxVoITaGExX 8 months ago
thats a red dot electronic sight right?
matthew22556 8 months ago
@matthew22556 yes. no zoom. pretty crappy. picked it up for like 20 bucks. Nothin fancy but it does the job.
AztecAirsoft 8 months ago
@AztecAirsoft Hey man if you want to get a better scope check out ebay! I bought a EOTech 552 holographic sight and a trijicon acog scope for cheap. They are from japan but still great. I've had my holographic for around 2 1/2 years now and my acog for a couple months. They run about 50-60 dollars usually if you get them from out of the country. It's up to you though. I'm just throwing out suggestions if you decided to get a different scope. Great review by the way!
FireFighter8865 7 months ago
@FireFighter8865 thanks for the advice, but as it seems this gun is now my secondary. i recently bought a acr and i am putting a b2 holo sight on that. but thanks a bunch for that. i might look into that for my other guns
AztecAirsoft 7 months ago
@AztecAirsoft yeah i now know that this is a different model gun then what i thought it was
TheAmazinyason 8 months ago
the chamber releaser thingy on the airsoft gun opens open the barrel and gearbox
TheAmazinyason 9 months ago
@TheAmazinyason no it doesn't. to get to the barrel you have to push out the pin by the mag, then it just slides out. to open the gear box you must take both pins out. disconnect all the wires, unscrew the bolt in the back, and then unscrew the gearbox. screws hold the gear box together, not the bolt catch or charging handel.
AztecAirsoft 9 months ago
and how heavy is it
mrcool0975perry 9 months ago
@mrcool0975perry about 7 pounds. it feels heavier because of the metal rail in the front. 8 with good optics
AztecAirsoft 9 months ago
thanks ...
mrcool0975perry 9 months ago
This is very good! I am getting one very soon.
AirsoftCQB37 10 months ago 7
@AirsoftCQB37 good choice, i just had a game with it today and it worked flawlessly. Also, i didn't mention the version 2 gearbox which is made like a kwa, not a half ass echo 1. Tell me how you like it after and feel free to ask about anything that was unclear or i didn't answer.
AztecAirsoft 10 months ago