2001 Ford Mustang Cobra On Dyno with Nitrous Express SIngle Nozzle

[HondaFn1]

i got my car dynoed today no programmer just bolt ons and laid down 316hp and 312tq

[COBRARJ21]

is nitrous the only mod?

[leunitis420]

01 COBRA HAS 320HP STOCK HOW DID YOU ONLY GET 30 HP OUT OF 100SHOT MUST BE A CANADIAN MODEL

[NitrousExpressVids]

@leunitis420 320HP is factory rated horsepower at the flywheel, which is always higher than at the wheels through parasitic drivetrain loss. We show naturally aspirated Wheel horsepower levels, then show nitrous wheel horsepower levels.

[santiagomel00]

Maybe the did this pull with the timing already backed off, so when they do a nitrous pull it will look like a big gain

[santiagomel00]

Maybe these guys backed off timing and then did there dyno pull to show a big increase in numbers when they do a nitrous pull

[Speedstang460]

Anyone ever think about the fact this thing could be geared? I've seen a ton off the 96-98 and 99/01 cobra's n/a with 4:10's-4:56's. Any of those gears he could take off in 3rd with them and would definitely rev that fast on a 4v. Definitely not stock listen to that exhaust and has a jlt cai...car should have made 10-20rwhp baseline and more tq each pull with the n2o. Something isn't right here

[mikeandersen123]

there is no way that cobra is doing less torque then horsepower on nitrous. this shop must suck or that car is having some serious issues.

[MrTruckguy420]

It doesn't matter what gear it's in. The RPM peak hp will show 2nd, 3rd or 4th, 5th.

[trbd331]

@MrTruckguy420 It does matter what gear it is in. 4th gear is 1:1 ratio which shows the actual output of the power that a vehicle is making and it is how all cars are dynoed and will give you a comparison to other cars. With that car being dynoed in 2nd it wasn't showing the actual power it was making

[sny714]

Also, about the spoiler, thats the stock 01 spoiler.

[sny714]

253rwhp basline is too low for stock if the car is bone stock that is. Bone stock the car should baseline closer to 270rwhp. Also about the 2nd gear pull.....umm???? I thought maybe he was putting it in 4th right after first but the rpms dont drop enough and it revs up too fast, so definitely not 4th gear pull.

[blown87gt]

This makes no sense, that car should put down way bigger number than that, especially the baseline.. And they're dynoing it in what appears to be 2nd gear, so obviously they don't know what they're doing

[pmm1350]

theres somethign fishy wish this. that car should put down way bigger numbers than that

[2889joeracer]

yea im a little confused about this 2nd gear pull here... and i didnt know they made cobras with that spoiler??? but it appeared to be a 4 valve

[santiagomel00]

yeah the 01 cobras have it. mine does

[2889joeracer]

now i know thank you

[StriderTacticaL]

Ok is it just me or has anyone noticed that they dynoed the car in 2nd gear instead of 4th gear(1:1) ratio?

[hugoloves2spooge]

I didn't know Bill Clinton liked cobras!!! LOL!!!!

[mustang4rm305]

the blue gt on the right its a 2 valve and makes 423 pounds of torque with an 100shot too

[mustang4rm305]

guys i know who can teach you to dyno and tune a car. You should be able to get 400rwhp with an 100 shot on that car, seriously my grandma can do it better

[chrijens]

Spray is good!

[stripnzinc]

where was that dyno done at it looks to me like that ole boy dont no shit how to properlly dyno a car

[svtmadness]

that used to be my car damnit

[santiagomel00]

damn i make 319 without nitrous. what you guys do. dyno it with the timing backed off? and with 75 shot you would think he would gain 100lbs of torque.

[best17driver]

Are you sure that was a COBRA? My V6 mustang can put out as much horse power as that guys when he's not running spray...

[svtmadness]

@best17driver you wish dude that cobra would make you look like your sitting still!

[best17driver]

@svtmadness if u say so