Hey that is a reli nice set to own... Gt him 2days ago and I went to get another 1 2day... 1 for displaying/posing and another 1 is MISB (mint in seal box)... =D
i have my own way of doing this. it does use an exoforce hand. but it also uses two of those oval shaped techinc pieces with the for holes. and you need to cut one of the smallest red pegs in half for it to work. btu the finished project is the hero eyes match with the witchdoctor eyes. and its a very secure fit.
i am going to use this on witch doctor when i get him because it is way better than that lousy piece of armor (not that the way lego placed it was bad but this way is better)
1 Glatorian neck, half a Lightsaber Rod and any villian head of your choice. I just wanted to check this out as I can't find anymore Glatorian necs anywhere. :(
Awesome! Was it my use of the exo-force hands that inspired this, or did you come up with this before watching my video response on your last video? As always, keep up the great MOCing!
@Aang9482 Thanks. I actually did three Witch Doctor-headed hero-bodied MOCs about a week ago. Not satisfied with them yet, and still trying to flesh out a decent miniature backstory.
@LEGOJANG If you use an exo-force hand on the back similar to my design then it won't turn to the left or right like you showed at 2:20. Although you may have thought of that already.
@LEGOJANG How about a group of elite heros were assigned to make themselves look like witch doctor so they could trick the creatures of quatros into obeying them. therefore, they lead them to attack witch doctor
@LEGOJANG Can You Make A MOC Called Zippleback? It's A Two Headed Dragon Found On The Planet Quatros. It's Got A Scorpio Head And A Waspix Head. The Green Head Breaths Gas, And The Yellow Head Lights It.
@Tails11seven for the third time, i apologized already, and if if it was a mask it would attach to a face. the skull IS his face. the only mask hero factory has made was for meltdown, if you can call it that.
they should use that trick on witch doctor
misskelsishane18 1 month ago
This has been flagged as spam show
Hey that is a reli nice set to own... Gt him 2days ago and I went to get another 1 2day... 1 for displaying/posing and another 1 is MISB (mint in seal box)... =D
Modukon92 2 months ago
Is there a hole in the socket joint?
DCMarvel2009 2 months ago
Did you do this when you made the Witch Doctor Drones?
SonicJrandSarah 2 months ago
I really needed this... thanks!
theshredder55 3 months ago
@LinkandRutofan no because check out his witchdoctor review
ThePokemonboyz8 3 months ago
i used this to put on a 2.0 mask without the visor and it worked PERFECTLY :D
MeGrimlockReviews21 3 months ago
@LEGOJANG why is your witch doctor head tan
ThePokemonboyz8 4 months ago
Is Jang your first name??
AquamanFan2000 4 months ago
is your witch doctor mask a different color? it look's like a sand like color
biomaster1231 4 months ago
@biomaster1231 Im not JANG,but i do know that its aldous witch not witch doctor!
GTArocksthisworld 2 months ago
well f u want to make a moc body for it u could use drilldozer pieces like the shoulder pad things
jarenanderson2000 4 months ago
i have my own way of doing this. it does use an exoforce hand. but it also uses two of those oval shaped techinc pieces with the for holes. and you need to cut one of the smallest red pegs in half for it to work. btu the finished project is the hero eyes match with the witchdoctor eyes. and its a very secure fit.
takanuinuva 4 months ago
does it work with other villians heads?
ebayreviewer75 5 months ago
i am going to use this on witch doctor when i get him because it is way better than that lousy piece of armor (not that the way lego placed it was bad but this way is better)
BSNUKE 5 months ago
does this work with raw jaws head?
Makutaman27 5 months ago
@Makutaman27 raw-jaw is the only one that doesn't work without a rubber band.
LaZeRgIbBy 5 months ago
@LaZeRgIbBy thnx i got a bunch of rubber bands
Makutaman27 5 months ago
lego makes greatest helmet ever.
make it unable to fit on hero head.
nocturn333 6 months ago
I'm so going to use this method, and give credit to you, of course! :D
989jer 6 months ago
Hey Jang whose head did you use for this MOC?
DCMarvel2009 6 months ago
Imagine if you could re-make the Witch Doctor neck/head joint with this type of tooling. It would look way better.
DCMarvel2009 6 months ago
Question: Why is your Witch Doctor mask yellowish?
ROBOCOP603 6 months ago
@johnnieRad why would he make a moc with a copied name and copied idea from How to Train your Dragon do you know what M-O-C means? (MY own creation)
NEReviews 6 months ago
whered you get te witch doctor hat an how much for the set
legolaughter2986 6 months ago
I managed to do it with less pieces, actually.
1 Glatorian neck, half a Lightsaber Rod and any villian head of your choice. I just wanted to check this out as I can't find anymore Glatorian necs anywhere. :(
ignikiX 6 months ago
Wow! That's really clever mate! I might consider it! =D
KrytenMark 6 months ago
wow exelent very good idea
gerou100 6 months ago
how about a corrupted hero character for a moc
blackopslegostarwars 6 months ago
@blackopslegostarwars that would be awesome . . . .
edwardelric1910 6 months ago
You can also (for Bionicle glatorian heads) just cut off the outer connecter pin, it worked for me
BioDemonMan 6 months ago
JANG you make me want to buy a tonne of these XD
karma756231 6 months ago
That's very clever!
shixgo 6 months ago
JANG *sniffle* i love you man
MegaKingzilla 6 months ago
@herofactoryreviewer i already apologized
LaZeRgIbBy 6 months ago
Awesome! Was it my use of the exo-force hands that inspired this, or did you come up with this before watching my video response on your last video? As always, keep up the great MOCing!
Aang9482 6 months ago
@Aang9482 Thanks. I actually did three Witch Doctor-headed hero-bodied MOCs about a week ago. Not satisfied with them yet, and still trying to flesh out a decent miniature backstory.
LEGOJANG 6 months ago
@LEGOJANG If you use an exo-force hand on the back similar to my design then it won't turn to the left or right like you showed at 2:20. Although you may have thought of that already.
Aang9482 6 months ago
@LEGOJANG How about a group of elite heros were assigned to make themselves look like witch doctor so they could trick the creatures of quatros into obeying them. therefore, they lead them to attack witch doctor
LegoDude2465 6 months ago
thank you so much. Gonna modify my witch doctor this way to make look better.
Makutaman27 6 months ago
Nice one there, LEGOJANG. Will definitely try this when I buy Witch doctor. Always dun like the idea of using shells for the villain heads
ridhwan5 6 months ago
jang, acept my response?
oliviaxiaoyuwang 6 months ago
Can this be done with the other villans heads?
MrUploadude 6 months ago
Thank you LEGOJANG for this now when i get Witch Doctor he will look even better!
StarScream6606 6 months ago
A BIG THANK YOU FOR LEGOJANG DOING THIS VID!
mattdal007 6 months ago
Alternatively, you can use a rod that you can get in Lego Minifigures series 5, on the Viking axe
kingmarshmellow12 6 months ago
could you use this for witch doctor himself?
benjieboyhero 6 months ago
hmm hmm youre next moc will have a witch doctor head right?
also make an ablbodus witch moc
redstar555 6 months ago
Can you still please do the regualar city and Harry potter sets?
rcmen13 7 months ago
@chungw123456789 i guess he made it looking more bone coulored
BioDemonMan 7 months ago
This has been flagged as spam show
hey idiots, its just weird lighting and its a SKULL not a mask!
LaZeRgIbBy 7 months ago
@LaZeRgIbBy Don't call my commenters idiots.
LEGOJANG 7 months ago
@LEGOJANG lol
redstorm15612 6 months ago
@LEGOJANG yay someone whos finally here to protect me! :d
kawathegreat003 6 months ago
@LEGOJANG FOREHEAD CANNON YAY also can you figure out a way to use a uncovered head wit out it looking wierd
DucharmeProductions 6 months ago
@LEGOJANG sorry
LaZeRgIbBy 6 months ago
@LEGOJANG Can You Please Make Surge 3.0, Breez 3.0, And Evo 3.0?
johnnieRad 6 months ago
@LEGOJANG Can You Make A MOC Called Zippleback? It's A Two Headed Dragon Found On The Planet Quatros. It's Got A Scorpio Head And A Waspix Head. The Green Head Breaths Gas, And The Yellow Head Lights It.
johnnieRad 6 months ago
@johnnieRad sounds like how to train your dragon.
redbarron718 6 months ago
@LEGOJANG I appreciate you protecting your viewers. It's inspiring.
loLFERBERG 6 months ago
@LaZeRgIbBy your mean words will never make me stop watching LEGOJANG.
legojellybeans 6 months ago
@LaZeRgIbBy are you sure your not the idiot because its pretty obvious its a mask
Tails11seven 5 months ago
@Tails11seven for the third time, i apologized already, and if if it was a mask it would attach to a face. the skull IS his face. the only mask hero factory has made was for meltdown, if you can call it that.
LaZeRgIbBy 5 months ago
Or it could be a resin re- mold
itis121 7 months ago
Witch Doctor´s mask color is because of the light...
Daymond1998 7 months ago
Thanks very much for posting this.. and the other 'villain' animal-mask to hero head vid. Very helpful stuff. :)
Lightninging63 7 months ago
Would like a blue minifig spear like on stormer 2.0 work?
Makutaman27 7 months ago
why is it yellowy
bionicledude98233 7 months ago
Thanks. I'm planning to make a skeletor moc from he-man.
TheOneEyeDroid 7 months ago
Well done, Jang. I might save up on a second Witch Doctor and make my own MOC
voiceactoritrainin1 7 months ago
Did you see my connection video response? :D
1998quicksilver 7 months ago
i see a moc coming with the tan witch doctor head
tnlego29 7 months ago
@ToaAckar then nevermind
theBionicle789 7 months ago
COOL, but W happened to the "mask"?
KyleHudson14 7 months ago
WTF HAPPEN TO HIS HEAD D:
awsomness257 7 months ago
Did you paint Witch Doctor's mask, or is it really that yellowed?
DarthPalidin 7 months ago
make an adolus witch moc
deltaghost55 7 months ago
Can this also be done with the Fangz head?
Kikimaster720 7 months ago
Do you have any ways to connect raw jaws head to a hero head?
Builderanddestroyer 7 months ago
This has been flagged as spam show
@Builderanddestroyer my channel has an okay way
oliviaxiaoyuwang 6 months ago
is that brown?
Komosi123 7 months ago
@chungw123456789 its an off-white
cooldude6385 7 months ago
that easy
riverthehedgehog205 7 months ago
why does the witch dostor head look yellowish
LegoMETAL44 7 months ago
Great but you can make it better right ? ;)
Andty1432 7 months ago
i used the lightsaber part to make the skull caps stay on with out the headgear piece and i just cut it with a wirecutter!
Ackarproductions5 7 months ago
@ToaAckar why are you here?
theBionicle789 7 months ago
My god, THANK YOU! That was really helpful!
MakutaDreadscythe 7 months ago
jang, i made an passible way to make a raw-jaw head on hero head, ill uploadit soon
oliviaxiaoyuwang 7 months ago
Wow, I just made this design and then I get on the computer to see you did it.
pukeslot 7 months ago
it shouldn't be for being 1st or 2nd or 3rd, the accomplishment is being last XD
blooboy4747 7 months ago
great
bioniclehead 7 months ago
why does the 240 hurt why why why
dragoon7926 7 months ago