if you have about 35 years of spraying experience you can hear the fluttering pulse of the spray as is lays down , it doesnt have that crisp smooth sound like the hydraulic pressure that pushed material thru a fine finish tip This electric gun and spray tips at this pressure pulsing will spray alot more orange peel ( not acceptable in alot of cabinet , nice panel doors etc areas for high end quality work
unless lower quality work is acceptable for certain customers
@yotchsy use a water base acrylic in a more enclosed area without airflow to absorb all the water in about 20 doors in a small area , you better have fans setup in advance or a way to open something quick or all your material will run. If you just put enough material on with a frosted look and not a full wet coat that flows out like glass, you might be able to walk away with 20 doors just sprayed
I would love to see how much over spray got past the paper and on to the wall behind it
artmorehead 1 year ago
if you have about 35 years of spraying experience you can hear the fluttering pulse of the spray as is lays down , it doesnt have that crisp smooth sound like the hydraulic pressure that pushed material thru a fine finish tip This electric gun and spray tips at this pressure pulsing will spray alot more orange peel ( not acceptable in alot of cabinet , nice panel doors etc areas for high end quality work
unless lower quality work is acceptable for certain customers
basracer 1 year ago
Can it handle two part paints? Awl grip or similar .
mickawber1 1 year ago
It's ICI Dulux Fortis Satin. Now under a new label by Glidden Professional. Very nice paint for brushing too.
TheSHCS 1 year ago
what sort of paint are you using here? oil based or water based?
Marlinieum 1 year ago
Yes they really work. You can purchase these exclusively at your local Sherwin-Williams Store.
skmoose861 1 year ago
It can bubble if dryer is too close and too hot. I have it set hi heat but far back.
TheSHCS 1 year ago
We dry the doors because in less than 45 mins we setup, Mask off, spray and dry the door and often leave.
TheSHCS 1 year ago
why are using a heater after you sprayed?
doesnt it bubbled the paint
I am contractor and I never dry doors .
yotchsy 1 year ago
@yotchsy use a water base acrylic in a more enclosed area without airflow to absorb all the water in about 20 doors in a small area , you better have fans setup in advance or a way to open something quick or all your material will run. If you just put enough material on with a frosted look and not a full wet coat that flows out like glass, you might be able to walk away with 20 doors just sprayed
basracer 1 year ago
I am really thinking about buying on of those, do they really work? and could you spray lacquer (top coat) with it? hope for a response
bushkilledtowers 1 year ago
@bushkilledtowers
Lacquers are the only thing that these cannot spray due to lacquers igniting.
QkSlvrSf 1 year ago