VOLTROLYSIS #1

[UniversalExpanse]

i think stan meyer was using pulsed dc at a resonant frequency at a higher voltage to produce the same results using less current (milliamperes=1000times smaller than 1 ampere). If your gonna put 6 amps DC through that thing you might as well us electrolysis instead.

[bartley440]

Sooo, How's the WFC thing going?

[bartley440]

Any big progress on producing HHO?

[sephiroth671]

a stan meyer setup. rofl you fucking jockeys.

get a clue.

[RaulGreenPower]

What's the frecuency you'r using (cicles per second).

For what i saw you have a very good production right there. How many liters per minute?

[The777truth]

How much energy does it take to run the pulse?

[vdubdipr]

sorry amps condition with amps

[vdubdipr]

you need to have your tube annealed in an (argon?) atmosphere and it will be more productive if you "condition it with increasing voltages in increments of 5 giving it a break and then adding another five untill you hit 30. after you do all of that, thats when your cell will hit peak efficiency

[DellInspiron56798723]

wot is this

[jeremusic]

please send link for details and diag

[ghandrei]

Those who will be able to split 1 kg of water using less than 4.4 kWh will be efficient.

-1kWh=860kcal

-H2 combustion energy = 33811kcal/kg

- from 8.9368 kg of water you get 1kg of H and 7.9368 kg O.

So,in 1kg of H2O we have 4.4 kWh of H.

[pitbike2006]

make a video on how to make one

[VOLTROLYSIS]

In this video I was using pulsed DC but got the same gas output as with just straight DC. I was using about 6 amps. When I can get the same output with 1 or less amps I will give instructions on how to build what I do it with.

[pitbike2006]

ok nice one i reall want to make my 2nd cell i have 1 video on me cell at the moment but its crap just (+)(-) that it i am going to try a nutral cell in a min kk

[unidudedx]

how do you make one

plz write back!

[Blueskyh2o]

Yes, this is the way. Congratulations. Please post more of your videos. We will be honoured to participate on your sucesses and failures, cause this is the right path. We dont want straight amperage UNEFFICIENT conventional electrolisys, we want Stan Meyer zero point EFFICIENT super-electrolisys, right? Let the truth be spoken NOW. Hugh!

[VOLTROLYSIS]

(VIC)= Voltage Intensifier Circuit. This is a step up coil in series with 2 inductors and a fast switching diode. I am winding a step up transformer with 200 turns of 24 Gauge on a 1.5 inch ferrite toroid core and 1800 turns of 36 Gauge for the secondary, with tap points at 600,900,1200,1500 and 1800 turn points so I can try different voltages to the cell. The chokes will be bifilar wound on a .75 inch ferrite rod 7 inches long. this VIC should minimize the amps and give me plenty of volts.

[motofox69]

nice going. let us know your progress

[brianempson]

He meant that with his pulse setup going he got about the same results as he did with straight DC. I'm still going for the pulse setup though.

[VOLTROLYSIS]

Yes... same output... but that should change.

Email me at Voltrolysis(@)hotmail(dot)com, and I will send you links to the VIC diagram, online parts list and links to Stan Meyer instruction videos.

[ShinobiLB400]

@VOLTROLYSIS

the email u mentioned isnt working anymore?

[HydroCars]

Voltage intensifier circuit = transformer choke coils diode. Volt, note primary coil should be at resonance when on, check that with a volt meter in parallel with the primary side of coil, look for top volt reading. check out waterfuelcell or stanleymeyerscom

[pwmpower]

This is so great, I think I am going to dump my HHO generator and make another. Makes you rethink all this work. Thanks

[ising4jesus]

Please define "VIC".

[VOLTROLYSIS]

VIC = Voltage Intensifier Circuit. This is a step up transformer in series with 2 inductors to restrict amps and let voltage take over to perform the work.

[ising4jesus]

You said the pulse has been the same as straight DC.

What frequencies & pulse widths have you tried? All of the documentation states that these are crucial to producing the larger amounts of HHO.

[VOLTROLYSIS]

At this point it does appear to put out the same. BUT!.. I have yet to put this pulse system in series with Stan Meyers Voltage Intensifier Circuit (VIC). Winding that now. I have a Liter Per Minute (LPM) gas flow meter and will use that and an amp meter to determine gas outputs form different configerations

[stancruse]

Cool.