@441rider I bought the one from CNCHelicopter that is recommended by the Blade 400 Bible to replace the stock 420 motor, the shaft is a different size 3.17mm/.125" so I drilled the pinion out on my lathe, also had to shim the motor up with washers as the shaft is longer as well. But it works good.
Is that a 380 or 370 sized motor?
441rider 1 month ago in playlist More videos from thai2day
@441rider I bought the one from CNCHelicopter that is recommended by the Blade 400 Bible to replace the stock 420 motor, the shaft is a different size 3.17mm/.125" so I drilled the pinion out on my lathe, also had to shim the motor up with washers as the shaft is longer as well. But it works good.
thai2day 1 month ago