To get the EDIS to megasquirt, do I need something extra then, or could I just wire it up to a standard MS unit ? Im bidding on one standard MS V2 on Ebay : )
Is that a Megasquirt stim? I'm sure my own has only 5 pots.. Are all them pots inputs?
Am I right in thinking you have the PIP from EDIS wired to the DB37 on a stim?
I did a very similar thing 2 years ago, only I has my sparkplug clamped to the door striker, coil pack on the running board and VR sensor triggered off my cars vented brake disc! sparks and RPM's were random, but still, I saw RPM and sparks, which was nice..
was just making sure my edis system i took off a junk yard car worked before i put it in the car. Also making sure my megasquirt read the rpm signal from it.
@scooterx517 Did you get an accurate rpm value on megatune? (I mean the same on the computer as the one you see on the dremel as you change the rpm setting on the dremel, i think these go up to 10k-15k rpm right?)
was just making sure my edis system i took off a junk yard car worked before i put it in the car. Also making sure my megasquirt read the rpm signal from it.
LMAOO MY NAME IS EDIS XD
101edis 3 months ago
36 - 1 tigger wheel
scooterx517 11 months ago
How many teeth are on the wheel and how many cyclinders will you be running? Thank bill
earlyhemibill 11 months ago
To get the EDIS to megasquirt, do I need something extra then, or could I just wire it up to a standard MS unit ? Im bidding on one standard MS V2 on Ebay : )
klasse2bub 1 year ago
I absolutely LOVE the fact you used a Dremel for this. There's some serious marketing opportunities for everyone here :)
Hardwyre 1 year ago
Is the coil getting it's current from the Megasquirt computer? Bill
earlyhemibill 1 year ago
@earlyhemibill no its not its getting power from the 12v dc converter i have there (would be battery in your car) megasquirt grounds out the coil.
scooterx517 1 year ago
so can i use a edis module and crank wheel with a aem twin fire and cdi pencil coils for megasquirt to run it?
dohczc420 2 years ago
hey! good stuff. Is it possible to buy this kits fully complete, just plug and play?how much and where?Thanks
albercarri 2 years ago
yo what kind of laptop is that? I saw it and am like "WOW i'm a Megasquirt user and a thinkpad user too!" I have and A22P btw.
X10A 3 years ago
it was a jimstim v1.3
scooterx517 3 years ago
Is that a Megasquirt stim? I'm sure my own has only 5 pots.. Are all them pots inputs?
Am I right in thinking you have the PIP from EDIS wired to the DB37 on a stim?
I did a very similar thing 2 years ago, only I has my sparkplug clamped to the door striker, coil pack on the running board and VR sensor triggered off my cars vented brake disc! sparks and RPM's were random, but still, I saw RPM and sparks, which was nice..
MattKabTechnic 3 years ago
thats pretty cool
jdsanchez473 3 years ago
Tell me one thing. What does it do, that trigger wheel?? If you will help me with my MS project i will be glade.
superchargedM90 3 years ago
was just making sure my edis system i took off a junk yard car worked before i put it in the car. Also making sure my megasquirt read the rpm signal from it.
scooterx517 4 years ago
@scooterx517 Did you get an accurate rpm value on megatune? (I mean the same on the computer as the one you see on the dremel as you change the rpm setting on the dremel, i think these go up to 10k-15k rpm right?)
valflyinf 1 year ago
was just making sure my edis system i took off a junk yard car worked before i put it in the car. Also making sure my megasquirt read the rpm signal from it.
scooterx517 4 years ago
not to a doosh, im just a newdb with MS. what were you doin here?
jusanthrday 4 years ago