i know this may be irrevelant to the video but i got a question , after i reset my router to factory settings because i couldnt log in , theres no line on my phone . i presume that is because it is in need of configuration? if so , can u help me?
@tylerandtony2 No. You match the encryption type and password between the Netgear router and your devices once and you never have to mess with it again.
I don't want neighbor's using our WiFi, but if I change the configuration, will our other computers still be able to access the WiFi? We have Netgear.
@tylerandtony2 You will have to configure your devices to use the encryption method and password you choose. Any devices connected with a cable are unaffected.
on my netgear i cant connect to the internet so i cant install/download the new firmware updates to it please help!!!!!!!! ( its a DGN2000 ) to write this im using my other router ( wireless G+ MIMO ADSL2 +) please help!
I tried changing my password and the windows password box comes up and says to use password I use the defaults and it doesnt let me go change password.
i have a ragemax 824 but it went off in a rain storm? how can i to access wifi router configuration and reset all my router settings mac-subnet -gateway for the router? because!!!! Verizon dsl phone support reset the modem but netgear wants to charge $60-$100 to fix my problem can you help me
how do you get another cpmputer to get online,m,,you talked about all this junk but what this thing is for,,jesus christ,,tell me how to get another computer online,,,not just this one you idiots,,,
i need help my wirless is working just fine for my pc and anybody can connect to it if they have the password but for some reason for the past few months my internet wont connect with a ethernet cable from my router to pc or even if i use the cable from the modem and connect it to my pc it wont work can anybody tell me how to fix this?
@abctime35 By the sound of it your ethernet port on the PC is either disabled or broken. Please come to my free support forum for additional help. FreeComputerConsultant (dot) com/forum
I have a Dual Band Netgear router. I can easily connect to the 11G but not to the 11N. My router says its broadcasting both 11G and 11N but my computer (with a b/g/n wireless card) isn't able to connect to the 11N. Can you help?
@SuperRikstar Addresses that begin with 192.168.x.x and 10.x.x.x are internal, non-routeable ip addresses. They are not public and not accessible via the internet.
This video was done on a test bench with all internal networks.
@rocklee966 All routers by default will have NAT enabled. Unless you have turned it off, it should be on. If multiple computers can use your internet now, I would guess NAT is enabled.
i need help i got the wpn824v2 and im trying to Configureit with a Satellite Connection, clear g4, and i cant get to the wizard setup page, i really need help
i want to connect my desktop computer to my encore wireless router and then make a connection from my wireless router to the gateway so i can connect to the internet, how can i do that?
i have aD-Link Modle NO.:di-524 router With a wireless USB conecter wich i use to access the internet. but recently the USB conector stoped working and i cant for the life of me get it working again. could you plz tell me hot to get it running again
HELP MY PLEASE!!!!!!!!! I have the router wrt54g but it doesnt want ot connect. it is saying "cant connect to linksys" i already reset it like a thousend times but it doesnt want to connect a few days ago it worked fine. i dont have a cable that connect the router to the pc cause i use the wireless adapter wusb54g HELP MY!!!!!!!
by cable, i intend standard usb cable - that is how my printer was able to talk to my box over wireless -- i was short in what i said cs didn't know who or what i was talking to ~ it will probably take awhile, it took me years to get where i am at
I have a wired and wireless comp. on my lynksys router my wired com. can see my wireless comp. but not visaversa. My wired comp is behind a switch. how do I make them accessable to each other and share between the two?
it is connected properly and i've done all of the setup steps but it still wont work.I'll work with it a little bit longer and if i doesn't work the ftw!
man i hate the dam netgear modern/wireless (router) that i got .. see i like to play online video games and for some reason the router doesnt allow me to connect to the online games servers i dunno how to fix the dam thing
once i plug in the router i cant go on the inter net and i did the wiserd thing like 1 hunder times and i didnt work. if i get a new router will it work better or is it my net work conection?
i know this may be irrevelant to the video but i got a question , after i reset my router to factory settings because i couldnt log in , theres no line on my phone . i presume that is because it is in need of configuration? if so , can u help me?
Shadow71295 3 weeks ago
@Shadow71295 Is it a standard phone line or Voice over IP?
FreeCompConsultant 1 week ago
@FreeCompConsultant thx for the reply , but i simply contacted my ISP and they fixed it immediately. Thanks again
Shadow71295 1 week ago
Best ever!
Ingr9821 2 months ago in playlist More videos from FreeCompConsultant
Thank you for the info but, how do I do that with the Netgear? Do we have to "log" in each and every time?
tylerandtony2 3 months ago
@tylerandtony2 No. You match the encryption type and password between the Netgear router and your devices once and you never have to mess with it again.
FreeCompConsultant 3 months ago
I don't want neighbor's using our WiFi, but if I change the configuration, will our other computers still be able to access the WiFi? We have Netgear.
tylerandtony2 3 months ago
@tylerandtony2 You will have to configure your devices to use the encryption method and password you choose. Any devices connected with a cable are unaffected.
FreeCompConsultant 3 months ago
Comment removed
tylerandtony2 3 months ago
How can I get a password so others can't use my internet ?
ronaldinha95 3 months ago
@ronaldinha95 You have to set WiFi security, such as WEP (for old devices only), WPA or preferably WPA2
FreeCompConsultant 3 months ago
how do i find out what my network name is
Zuzu57891 5 months ago
@Zuzu57891 Are you referring to your SSID?
FreeCompConsultant 5 months ago
THANKS TO THIS VIDEO FINALLY I GOT MI WIFI! THANKS MAN!
ellokillo503 8 months ago
@ellokillo503 how idk
cheyenne9060 2 months ago
This has helped alot. Many thanks
frankforest 8 months ago
on my netgear i cant connect to the internet so i cant install/download the new firmware updates to it please help!!!!!!!! ( its a DGN2000 ) to write this im using my other router ( wireless G+ MIMO ADSL2 +) please help!
911Dreda11 8 months ago
I tried changing my password and the windows password box comes up and says to use password I use the defaults and it doesnt let me go change password.
shurlock1 9 months ago
what netgear dont supply you with, is the modem...
100roberthenry 9 months ago
why i cant acces to my ip address site?says unable
marstuber96 9 months ago
how do i do the porting trigerring thing?? please help
XxFaMaSKiNgxX1 9 months ago
how do i find the phone number to contact my internet service provider?
zaqwedcxszxcvbnm 9 months ago
@zaqwedcxszxcvbnm Look on your monthly bill
FreeCompConsultant 9 months ago
how can you find a copy of the installation cd that come with the netgear wireless router wgr614v10
hookmeupcasting 10 months ago
@hookmeupcasting Go to Netgear's website
FreeCompConsultant 10 months ago
i have a ragemax 824 but it went off in a rain storm? how can i to access wifi router configuration and reset all my router settings mac-subnet -gateway for the router? because!!!! Verizon dsl phone support reset the modem but netgear wants to charge $60-$100 to fix my problem can you help me
hookmeupcasting 10 months ago
how do you get another cpmputer to get online,m,,you talked about all this junk but what this thing is for,,jesus christ,,tell me how to get another computer online,,,not just this one you idiots,,,
bathwaterfilms 10 months ago
But how do you get to that web page?!
jericahrose 1 year ago
@jericahrose In your internet browser enter 192.168.1.1 (this number is diffrent for some routers - check out instruction in router's box)
crazypaco 11 months ago
i cant open that page once i put the server, why?
daisylovesmoy 1 year ago
@daisylovesmoy I would need more info to even speculate. Come to my free support forum and I will try to help:
FreeComputerConsultant(dot)com/forum
FreeCompConsultant 1 year ago
i need help my wirless is working just fine for my pc and anybody can connect to it if they have the password but for some reason for the past few months my internet wont connect with a ethernet cable from my router to pc or even if i use the cable from the modem and connect it to my pc it wont work can anybody tell me how to fix this?
abctime35 1 year ago
@abctime35 By the sound of it your ethernet port on the PC is either disabled or broken. Please come to my free support forum for additional help. FreeComputerConsultant (dot) com/forum
FreeCompConsultant 1 year ago
I have a Dual Band Netgear router. I can easily connect to the 11G but not to the 11N. My router says its broadcasting both 11G and 11N but my computer (with a b/g/n wireless card) isn't able to connect to the 11N. Can you help?
Hypotenuse5 1 year ago
how do u get to the setup page
akakebo 1 year ago
@akakebo I have another video:
How To Access Router and WiFi Router Configuration
youtube (dot) com/watch?v=gb9kafn8Ebs
FreeCompConsultant 1 year ago
m8 we can see your ip address someone could hack you- i would cover it up or somefin
SuperRikstar 1 year ago
@SuperRikstar Addresses that begin with 192.168.x.x and 10.x.x.x are internal, non-routeable ip addresses. They are not public and not accessible via the internet.
This video was done on a test bench with all internal networks.
FreeCompConsultant 1 year ago
This has been flagged as spam show
Great Asian women for you ***lushfmlk.info***
akikohannri 1 year ago
help
coolrhino5 1 year ago
I did all you said and I still can't connect from my mobile's wifi.. Help?
leonidhaimov 1 year ago
I am gonna try this tomorrow...
leonidhaimov 1 year ago
Be ready Asian women online #lushfmlk.info#
jennaaiyani 1 year ago
well ihave a xbox 360 and it cant connect corectly it sais i have to aktivate NAT how i do this ?
rocklee966 1 year ago
@rocklee966 All routers by default will have NAT enabled. Unless you have turned it off, it should be on. If multiple computers can use your internet now, I would guess NAT is enabled.
FreeCompConsultant 1 year ago
i need help i got the wpn824v2 and im trying to Configureit with a Satellite Connection, clear g4, and i cant get to the wizard setup page, i really need help
TrailerBurnerJO 1 year ago
This has been flagged as spam show
Get Rich in 10 weeks with infinity downline!!
10 Week Retirement Plan! get paid everyday instantly!
$25 per referral! Proven System! Residual Income!
By far the best way to make money online Period!!
go to
infinitycashmoney . com
infinitydownlineee 1 year ago
@151910 ... what does I do? Try learning how to fucking speak and write in English you dumb ass
jeffstone1960 1 year ago
i want to connect my desktop computer to my encore wireless router and then make a connection from my wireless router to the gateway so i can connect to the internet, how can i do that?
dontdodrugs666 1 year ago
PLEASE HELP!!!!!!!!!!!!!!!!!!!! i want to put a security code on my netgear router but i just dont know how !!!!!
BFBC2fans 1 year ago
its work for psp or cell phones???? my psp and my cellphone can`t connect into internet what i will do
desmor12 1 year ago
The little green wireless light doesnt turn on for me...?
MARJOE98 1 year ago
i have aD-Link Modle NO.:di-524 router With a wireless USB conecter wich i use to access the internet. but recently the USB conector stoped working and i cant for the life of me get it working again. could you plz tell me hot to get it running again
nickoli1993 1 year ago
@151910 It may just require a user name and no password. Google the model of your router with the phrase "default password" after it
FreeCompConsultant 1 year ago 2
can you hide the Router? like with the Wifi connection hidden...
ENERGIZER0000000 1 year ago
HELP MY PLEASE!!!!!!!!! I have the router wrt54g but it doesnt want ot connect. it is saying "cant connect to linksys" i already reset it like a thousend times but it doesnt want to connect a few days ago it worked fine. i dont have a cable that connect the router to the pc cause i use the wireless adapter wusb54g HELP MY!!!!!!!
Jboo580 1 year ago
@Jboo580 They all come with a network cable. If you don't have one, you'll have to borrow one to connect to it and see what's going on.
FreeCompConsultant 1 year ago
@FreeCompConsultant but i used it before and it worked great without that cable
Jboo580 1 year ago
@Jboo580 I understand, but if you can't connect to it now with wireless - then you need a cable to see what's going on.
FreeCompConsultant 1 year ago
i tried settiing up a wep key then it said its nat compatible with wps then i clicked ok then it and my wirless stopedworking
Goku32176 1 year ago
@Goku32176 hook up cable and do "pre-shared key"
pzmtuthcvpvl 1 year ago
which cable and what is pre shred kid and dont call me a noob cuz im just a kid
Goku32176 1 year ago
by cable, i intend standard usb cable - that is how my printer was able to talk to my box over wireless -- i was short in what i said cs didn't know who or what i was talking to ~ it will probably take awhile, it took me years to get where i am at
pzmtuthcvpvl 1 year ago
great video
pradeepkannan83 1 year ago
good
pradeepkannan83 1 year ago
Interesante ayuda.
mafshs 2 years ago
hey ,mr. realtor you must tell us what type of connection you have, dhcp or via pppoe.
you can do it pren. just a simple connection.
grejanegremon 2 years ago
hi I have 3com ADSL router 11g 3CRWDR101A-75 model. please help me to reconfigure. I already connected everything but I cant get online. thnx
realtor0917 2 years ago
ds uses wep sp u have to set it to wep
talkfree14 2 years ago
how can i restart my router like reconfigure it cause it deosnt let me get on wifi on my ds =(
supererik123 2 years ago
What about my cisco router!
Digitalstorm007 2 years ago
I have a wired and wireless comp. on my lynksys router my wired com. can see my wireless comp. but not visaversa. My wired comp is behind a switch. how do I make them accessable to each other and share between the two?
genec2007 2 years ago
i have a tp-link can someone send me a link how to add a password pls help
noc0mmen7 2 years ago
nooo sorry
cancee1 2 years ago
i have a dial up connection. can i use a wireless router?
nts123456 2 years ago
Some routers have a dial up modem connection, but one may be hard to find. I sold one on eBay years ago and didn't get much for it.
FreeCompConsultant 2 years ago
i cant go in the internet with mine so mine just sayss that it couldnt find my connection type. I cant update it either. HELP
MrPohada 2 years ago
I HAVE A NETGEAR!!!
EveOriginals 2 years ago
it is connected properly and i've done all of the setup steps but it still wont work.I'll work with it a little bit longer and if i doesn't work the ftw!
gahh frustration!
crazylj108 2 years ago
storing pasword
anurag4240 2 years ago
This has been flagged as spam show
Nice work. keep it up. mean time come for social media marketing for esteembpo**com jgfh
kodykodyoneill 2 years ago
Comment removed
elchamakito305 2 years ago
im sorry but netgear sucked for me.
IM NOT SAYING NETGEARSUCKS ENTIRELY!
im saying i bought a Linksys router for the same exact price as the netgear one and the was a huge beneficial difference!
THExGERMANATER 2 years ago
how come in some of my games, people cant connect to my server?
Skate1169 2 years ago
Forward your ports. I had the same problem with counter strike but I forwarded my ports and it worked.
BiscuitHeadProd 2 years ago
i go to 192.168.1.1 and it dose not take me there....
kool2pure 2 years ago
Thats because it his IP and you have to use your own he has a video on that to. OK?
ZaoHuZhua 2 years ago
192.168.0.1 -192.168.1.0
cobolt13 2 years ago
i have linksys wrt45gl and i have username and password changed can i restore it to default?
bogdanp22 2 years ago
i think if you hold down the reset button for 15 seconds it will remove the stored password
nytrini2005 2 years ago
how do you get on to that page?
Florencewhui066 2 years ago
ok so with this router thing i can set up my own wifi connection for my ipod touch?? I have no wifi at all around my house.
pimpmaster5465 2 years ago
Doen't work on my router (Netgear)
He is said "error message : The system cannot find the path specified" OMG!!
Eragon86micky 3 years ago
how do you find out the username and pass? please replyy,thankss
themanfromdowntheroa 3 years ago
see my other video:
How To Access Router and WiFi Router Configuration
at the 1:20 mark, or look in the comments for that video
GoRemotePC 3 years ago
default is admin
letmeborrow92 3 years ago
What is the default username and password
Akhtar102 3 years ago
THANKS for posting this video. It helps a lot to understand the complexity of setting up a wireless connection.
eighteenfive 3 years ago
man i hate the dam netgear modern/wireless (router) that i got .. see i like to play online video games and for some reason the router doesnt allow me to connect to the online games servers i dunno how to fix the dam thing
greenpea32 3 years ago 2
@greenpea32 ya dude i have the same problem
SuperJared27 1 year ago
@greenpea32 try turning it off for 5 mins
slash0479 1 year ago
@greenpea32 ahh same here i cant find any call of duty games when i connect my xbox to that router D=<
Neji2XL 1 year ago
once i plug in the router i cant go on the inter net and i did the wiserd thing like 1 hunder times and i didnt work. if i get a new router will it work better or is it my net work conection?
zelda3767 4 years ago
Ours does the same. We plug the router into the Wireless Router it blocks the internet.
PCGAM3RS 3 years ago