Nerf Maverick power mod cpvc barrels tutorial

[Zapdos2000]

Can this still fire normal nerf darts?

[SheriffBones]

instead of dremmeling out the inside of the pipes for easier loading, u might wanna try using a utility knife and carving it

[NerfCEO]

what are you using at 8:20?

[autonerf]

@NerfCEO A utility blade.

[Snailguy90]

So I want the brass to show so can I not put the black covering on and hot glue it to the other end ?

[Snailguy90]

I'm going to get the gears of war series mavericks or whatever their called different shade of orange and black I'm painting the draw black and doing a brass barrel replacement ( polished brass ) penny mod of course AR removal and putting half a maverick spring from a broke one in each

( I'm getting 2 )

[MrSoccerboy619]

nice vid can u do a tut on how to do rearloading please big help

[boofattack]

can we see a range test??

[LBPVIDSNOOb]

will PETG work?

[autonerf]

@LBPVIDSNOOb Yes

[LBPVIDSNOOb]

now it worked for me i guess people who didnt get it to shoot somehow didnt do it right

[The4Beatlesrock]

@autonerf can you make a tutorial on how to mod the cocking mechinisum like you did in one of your other vids?

[mastrchief99]

Lol nerf paint ball all the way, i dont……i dont even no i got here lol

[1c34l1f3]

wow this thing ruined my gun!! :(

[Pulsekid99]

i am so doing this mod

[TheACP13]

you take to freakin long

[dragondude24]

I fixed my gun

[AwesomeAnimationGuy]

@dragondude24

Whoops I meant to say that it wasn't right up against the barrel.

[AwesomeAnimationGuy]

@dragondude24

U can take the air restrictors out. I haven't done this barrel mod but the same thing happened to me and I did what u did. I later learned that my plunger was right up against the barrel like it was supposed to be. Try that.

[arbie999]

Can I still use normal darts like sunction, tagger darts and streamline? Thx

[arbie999]

Hi, I don't have a dremel, can I still do the mod? I mean the part u dremel the front barrel after you saw. Thx.

[dragondude24]

hi i know i commented earlier. should i do thiass to mine using markers?

[dragondude24]

i took the stick off the barrel plate things, and took the 3 prongs off of all the ARs, now my gun is shoot ing like 2 feet, and some are jamming, any help?

[autonerf]

@dragondude24 maybe it's not rotating right.

[dragondude24]

@autonerf its rotating right, anyway i fixed it i just kinda revsered the air restictors, remeber i brok the prongs off, now it works fine

[thisisbananas39]

@dragondude24 you need to cut out the piece under the stick, you know the litte circle at the base of the stick.

[turkeysnake]

@dragondude24 on the air restrictors there is a slight lip. This lip creates a seal between the barrel and the plunger thing which provides the air for the dart. When I first attempted the modification to the gun, I completely sanded these off. Result? The gun would barely fire the darts out of the chamber. What I suggest you do is get another gone, take out the air restrictors from it and return the gun, using said air restrictors to try again.

[dragondude24]

@turkeysnake i actually found the problem, i used fbr to pad the inside of the air chamber, and i forgot to glue it, so it would move to the front, blocking the only way out

[nerfinator877]

do u have to dremel the inner diamiter of the maverick

[nerfinator877]

what do u do with all these nerf guns

[lumbermouth]

when you are cutting the pipe with a saw, cut one piece off at a time, then measure out another 3 inches. the width of the blade could mess up your result. since autonerf didnt use a saw, he didnt lose any material

[wortiz69]

how much did the pipe cost?

[zoomingtothelemon]

really? 3 inch sections of cpvc for the barrels? are you sure? please respond

[autonerf]

@zoomingtothelemon Well, maybe slightly less than that. I sand mine down anyways.

[snipsmcfudge]

what was your job

[autonerf]

@snipsmcfudge tire technician

[koruleigh978]

totally sick, and the removable barrel chambers is awesome! simple too, I'll get around to doing that eventually, got a old broken maverick, can use that extra barrel chamber as a 2nd load..! very professionally done video, if I might add. gives the specifics on lengths, sizes, diameter, and the steps for barrel removal mod, cpvc, etc. 5 star rating.

[hizio96]

do u like have an unlimited supply of mavericks

[turkeyleg987]

@hizio96 he probably got a job

[autonerf]

@turkeyleg987 I lost my job back in March, so now I am selling all my Nerf guns. That's why I have so many videos coming out lately. 

[drag117]

@autonerf so making nerf mods is just a hobby? you can get a lot of money just making moded guns and selling them, there is a lot of collectors that would buy them :D

[autonerf]

@drag117 Yeah that might work if your name is Uin13. Most of the time I lose money selling them.

[drag117]

@autonerf you dont have to make a lot of mods and then try to sell them, that wont work, search people that want mods, tell them the kind of mods you can do, make a general cost facture, and then make them, that way is safe cause you know they will pay (of course make sure they have the money)

[legobrickfilms1]

Good job.

[xxshino123]

nice