Test 2 Servo/reductora en miniZ Overland

[1122d7oom]

gdxgl;;fdszxvbnkpttrsxcvbiklm,­khg

[kaikoCadiz]

@1122d7oom Sorry, But I do not understand what you say. I would appreciate that you wrote me in English or Spanish.

Greetings ....

[MorkaGraven]

Is that not 4wd? If not, looks like it could do with fixed axles or a limited slip differential

[kaikoCadiz]

@MorkaGravenWith the original configuration of these cars and the small size they are, what you mention is hard to do. To do this you must create the car's chassis practically from scratch. The easiest way to do is add an engine 4x4 front axle and leave the motor on the rear axle as it comes from the factory.

[c43939]

Why not 4x4

[kaikoCadiz]

@c43939The Kyosho Overland MiniZ not make them 4x4. Only sold with rear traction.

[MrKeny2012]

Tiene tracción en las 4 ruedas?

[kaikoCadiz]

@MrKeny2012 No. Los MiniZ overland son solo con tracción trasera, aunque parezca totalmente ilógico para un TT. Hay quien mediante algún bricolaje lo convierte en tracción 4x4.

[mark46s]

0:16 hahahahahah..heeelp meeee plsss!!!

[DCRlive]

verry nice. cool rims and tires. Greet DCR

[10parkour10]

kaiko, esas ruedas son de speedy no?

un saludoo

[kaikoCadiz]

@10parkour10 Pues no me acuerdo con seguridad. Son de hace 2 años. Creo que si son de Speedy.

[retrospectivesk8crew]

y do u use this the diffs arent even locked get a micro crawler

[kaikoCadiz]

@retrospectivesk8crew The rear differential is locked with an optional piece that brings the car.

[Surfskate525]

cool

[Surfskate525]

cool

[bobwinsthelottery]

Whats with those tires? xD

[kaikoCadiz]

@bobwinsthelottery You're right. Currently I have new tires very good, made of silicone. These were the first silicone tires purchased. They were excellent even when they were worn. That's why I loved them. The use until they were super smooth. In this video, seemed to tire of F1.

[mralbin12341]

how do you get your overland so high

[kaikoCadiz]

@mralbin12341 making some cushions with metal rod longer than the original, and lengthening the pier with great care. Also with larger diameter tires

[serocell]

i dont like overland mini z because its not4x4 like xmods :|

[santidecozar]

¿Podrías decirme dónde le has comprado los neumáticos de silicona?

[nitrorckid123]

a chunk of hot glue on the back so it doesnt fall apart, and bald tires...also a gay ass electric...zipping annoying noise...my nitro rc would climb over any of these...

and it a rc nitro crawler the size of this.

[kaikoCadiz]

@nitrorckid123 If you read the video title says "test." And as a "test", so the engine will be provisionally subject of hot glue. The tires are silicone, and although you have spent a lot of grip. I have different types of tires that I use them when I need, as you can see in other videos. The noise "annoying" engine, is the normal sound of a microserve.

I am very happy that your cars are better than mine. Enjoy them. Cause I really enjoy mine, although the "bad" they are.

Regards

[skrulonair]

mad= good stuff !!!!!!

[kaikoCadiz]

@skrulonair OK! Thank you

[skrulonair]

mad



[kaikoCadiz]

@skrulonair Sorry. But I do not understand what you mean ...

[alvaaroh]

lol this thiiings aree soo cool

[kaikoCadiz]

@alvaaroh Sorry but I do not understand what you say. My English is not very good. Please repeat your comment more clearly.

[kaikoCadiz]

@Xmodders99 Hello. I do not know exactly. It seems that going to stop zero-constructed but you can still buy in shops and on Ebay.

[kaikoCadiz]

@Xmodders99 It is a full Kyosho Overland MiniZ. The bodywork is painted factory.

[kaikoCadiz]

@Xmodders99 The bodies of XMODS are not ugly, it does pretty well. But those Kyosho MiniZ are much better, more realistic and better finished. They are really good.

[JesKavno]

BORING@@@@@@@@@@@@@@@@@@@@

[santidecozar]

¿dónde le has comprado el kit para ponerlo tan elevado del suelo(para ponerlo 4x4)? Es que yo tengo uno y me gustaría ponerselo. El video está muy bien. 5 estrellas

[Tofuman924]

miniz overlands or miniz monsters?

[kaikoCadiz]

Overland

[TheBlacktex]

Hola,

Me gustaría entender mejor cómo instalar el adaptador en el modelo. ¿Tienes un vídeo o un enlace donde se ve de qué manera?

Yo haría lo mismo con Monster

[TheBlacktex]

Hola,

Me gustaría entender mejor cómo instalar el adaptador en el modelo. ¿Tienes un vídeo o un enlace donde se ve de qué manera?

Yo haría lo mismo con Monster

[narek71]

esta vacano loco!!!

[kaikoCadiz]

Excuse me? Do you refeires?. You mean the height of the car or at the speed it reaches with the reductive?

[XShadowRejectsX]

here ill translate it

cuánto tiempo son? como longitudinalmente, como 1 pulgada o 5 pulgadas, o 1 / 36 o 1 / 87?

[kaikoCadiz]

This car is a Kyosho MiniZ Overland , are at 1 / 27 and the length of this body is 170mm. The wheelbase is changed in three different sizes to adapt body.

Hope and help remove any doubts.

Greetings

[XShadowRejectsX]

how long are these?

[kaikoCadiz]

Excuse me? Do you refeires?. You mean the height of the car or at the speed it reaches with the reductive?

[alfonxoduff]

puedes hacer 1 video de komo la as instalado X FAVORRRRRRRRRRRRRR

[wowdark23]

how is this cool again>? lol -_-

[kaikoCadiz]

Hi,

Sorry, but you do not understand talking about. Can you explain better?.

My English is very basic. Greetings

[kaikoCadiz]

Gracias.  me alegro que te guste.

[RafaCosworth]

que pasada tío, enhorabuena. ;)

[Thomson132]

can you make a movie how you need to rise that car from the ground

[DavidOverland]

Muy buen trabajo compañero. Esa reductora tiene una pinta estupenda... la mejor relación velocidad/fuerza!!

[kaikoCadiz]

gracias!!

para mi gusto es una buena relacion, si.Aunque aun quiero conseguir algo mas de velocidad y mantener mucha fuerza. Ya veremos que consigo....

[kaikoCadiz]

Gracias compañero. me alegra que disfruteis l video. en estos dias quiero poner en el foro un paso a paso del montaje del servo.

[srpitro]

Muy guapo Kaiko, esa reductora va de lujo y el circuito y el video fenomenal. A ver si nos pones unas fotillos del invento en el foro.

[okayamita]

Saludos, Kaiko, un video impresionante, muy bueno, la pista te esta quedando de maravilla, y como podras comprobar el servo que montas ahora tiene mucho mas tacto de gas que uno pequeño, solo un consejo, procura que los civiles no te compueben el dibujo de los neumaticos, jeje, estan lisos tio, tu hummer pide unos nuevos a gritos.

[kaikoCadiz]

muchas gracias colega!!!! me algro que te guste. A ver si la proxima KDD pruebas el circuito personalmente.

Las gomas... es que se las pedi prestada a un F1...

[PRAXEDES25]

Muy bueno el montaje del video,y ese hummer está impresionante,felicidades amigo Kaiko.

[kaikoCadiz]

Gracias compi. Ya lo veras en directo cuando quedemos. Pero recuerda que casi todo lo que he conseguido es gracias a tu ayuda y consejos, y a la gente guay del foro.