How to Install a Scope on a 1891/30 Mosin Nagant by Removeing Rear Sight for 52 Dollars

[keonisitar]

Do you think this mount would work so I could have a rail system?

Search amazon its the UTG 11mm to weaver adapter.

[crcooktube]

@keonisitar The Problem most people are having when putting a scope on a Mosin is The recoil shakes things loose even though the mount will fit I am afraid you will have problems with it coming loose and looseing your zero. - Charles

[ZombieMasterEd25]

i hammered the shyt out of the sight the metal looks all fucked up nd the sight still hasnt moved. is it possible that the sight could be appoxyed? im thinking i can cut it off but all i got is a dremmel think itl work?

[crcooktube]

@ZombieMasterEd25 The Metal is pretty tough it could be welded on I wish I knew More the Dremmel Might Work but it may just ruin the Dremmel Blade maybe Someone reading the Comment Will Have a Ideal Sorry I could not Help - Charles

[ZombieMasterEd25]

i punched the pins out easy but but the damn sight wont budg at all nd i used a hammer on it. im thinking is it possible to cut it off with a dremmal?

[crcooktube]

@ZombieMasterEd25 It may need to soak put wd40 to soak I had trouble also but it sounds like your is gonna be stubborn - Charles

[HappyRock64]

can you put the rear sight back on without welding or gunsmithing after you remove it?

[crcooktube]

@HappyRock64 I have not tried it but There Should be No Reason You Couldn't because you only are driving out the roll pins and they can be reinstalled - Charles

[97bighunter]

i like the vid man keep um comin

[crcooktube]

@97bighunter Thanks for the Sub I'll Try To Keep Them Coming - Charles

[MrBasshead123]

Do i hear a cb in the background?

[crcooktube]

@MrBasshead123 its a Police Scanner - Charles

[bluerex21]

Great video, thanks for posting it.

[crcooktube]

@bluerex21 AnyTime I enjoyed making it Let me know how yours turns out - Charles

[ratagris21]

Thanks for posting and sharing this video. I have the same scope on an M38, but I used and S & K Steel Scope Mount. The set you have only works on the MN 91/30s and not any other model. You have to use a either an S & K, or JMeck, or another tap and drill for later models. I would recommend that you use blue locktite on the screws to make sure it does not rattle loose from the recoil of the rounds. Most Mounts you can't even keep in place after 10 rounds without the locktite.

[crcooktube]

@ratagris21 Thanks for the info It will help anyone who reading the comments looking for other mounts - Charles

[SRCDLC]

I have the same scope on my Mosin. Does it hold zero fine? do you like the scope? can you give me some input on it. Thanks For some reason my scope doesn't hold zero.

[crcooktube]

@SRCDLC it holds prety good i get better shots using non bulk ammo like winchester white box - charles

[SRCDLC]

@crcooktube Thanks man I will take it to the range again & see what happens.

[crcooktube]

@SRCDLC Let me Know How it Turns out - Charles

[trojanle34]

do the .22 mounts move from the recoil?

[crcooktube]

@trojanle34 it does not move because its wedge in pretty good - Charls

[tanker0wns1]

haha. hes ready for the police. if they come he gonna come blasting out with an ak47

[gothkid287]

I was about to look up the mount and order it... but then I watched as you sawed off the end of the wooden barrel cover.

allofmynope.jpg

[crcooktube]

@gothkid287 Its a Mod That Will Give you a Better Scope Mount but you do have to cut off the end of wood to get it to fit but it still look nice when u got it put together - Charles

[heckathornmike86]

i am trying to find something to work on my m44 i got a ebay scope mount it broke before i even got a scope on it wtf i need help lol

[crcooktube]

@heckathornmike86 These Parts from Amazon are Pretty Tuff Does The M44 Have The Same Site Setup

Then You Could Try One of These. I just Wish I could Find a Higher Power Scope With 15 Inches Eye Relief - Charles

[jswallet]

Do the holes on the receiver match up with the Allen screws on the scope mount?

[crcooktube]

@jswallet No The Holes Just Hold The Metal Bar The run The Full Length of the Scope Mount They Clamp the Dove Tail - Charles

[RIPxJoKeR]

What size is that punch?

[crcooktube]

@RIPxJoKeR It was a 1/8 from a kit from Harvard Freight Pittsburgh Item # 66440 - Charles

[briankofke]

Thanks. 

[crcooktube]

@briankofke Thanks for Stopping By  - Charles

[briankofke]

@crcooktube No problem! I'm going to sub you now. Thanks for putting your balls on the line to show the best video I have seen regarding a cheap scope setup for the Mosin; and you did all the work on camera so I could see how to do it myself. People like you get things done! This really helped me out a lot! Thanks again, and have a great day.

[idRATHERbeOUTDOORS]

4:51 police scanner in the background???

[crcooktube]

@idRATHERbeOUTDOORS Yep - Charles

[SouthWestIron]

Thanks for the vid! I like the sound of the fan and the scanner in the background!

Cool vid!

[crcooktube]

@SouthWestIron Thanks for the Comment and stopping by - Charles

[Charsept]

7:30 sad day

[xxtruckin93xx]

i need help my mosin nagant does not have the 2 pins onthe iron sight

[crcooktube]

@xxtruckin93xx I watched your video of your rifle and did not see any pins but they should be two maybe they got blued over and smothed out if you can find another rifle and measure how far in then you might be able to find them Maybe some else wil chime in with a ideal -- Chaqrles

[realogre32]

does it stay zeroed



[crcooktube]

@realogre32 It has so far I post some messages after my next trip and let you know - Charles

[soleniak]

helpful...thank you!

[crcooktube]

@soleniak AnyTime That What YouTubers Do - Charles

[littleandres09]

are you listening to a police scanner? LOL

[crcooktube]

@littleandres09 Yes it Breaks the Silence around Here - Charles (Take it easy on Max you probally Have stunted his Growth)