i would love one of these, id drive across the river wherever i wanted to get over to the next state, dont need to drive 15 minutes down the road to get across the river
I worked for Ravon Street Rods here in Billings, Montana for three years and I made a few molds off of car bodies and sub-components some times as well as a lot of cars from those molds over the years that I worked there. I bet you could make a lot of the body parts and sub-assembly parts the same way and utilize beetle steering and drive train systems for the rest. The only real fabrication challange would be the propeller and it's drive system. Reproduction Schwimmwagons market anyone?
ok guys that Schwimmwagen was produced between 1941 to 1944 only the german army aka the SS could get them but they was also handed out for the regular germany military during the time there were a total of 15,584 Type 166 Schwimmwagen cars were produced; 14,276 at Fallersleben and 1,308 by Porsche. Only 133 are known to remain today, and only 13 have survived without restoration work. unfortunately i dont have one but i have rode in one the backseat is very cramped but it is fun
Bevet Breizh XDDDDD
avalach56 3 months ago
Bath on wheels
Lockythepilot 4 months ago
I tried that with my car and it sank !!!
subron6er 4 months ago
GT5
Dirtlooter 5 months ago
hippies in a miltery car 0_o
jamesguitarplayer1 5 months ago
Oh wow. Now instead of driving down tot he pier with my boat and then go on the water, I can just drive down off the pier IN my boat!
redreaper2020 6 months ago
i would love one of these, id drive across the river wherever i wanted to get over to the next state, dont need to drive 15 minutes down the road to get across the river
darkeyce02 7 months ago
...Aaaaaaaaaaaaand...they got stuck...scheisse...
drackula1985 8 months ago
Comment removed
drackula1985 8 months ago
Yeah right.
Dinomanutopia666 8 months ago
The real selling point hear i think is the machine gun mount that doubles as a fighing rod holder
Darklordkime 9 months ago
I'd so drive one of these to school if I could. I've got my license you know. If I had one, I'd drive it into the creek to fuck with everyone, ha ha!
LGTheOneFreeMan 9 months ago
sympa !
TheTyrant01 9 months ago
You have to lower the propeller. back seat guy!
snakemanmike 10 months ago 2
ekstra maszynka :D
tomi68 11 months ago
...Because Asians can't drive.
LeBartman 1 year ago
DO WANT!!!!!
Classic1942 1 year ago
ça doit être impressionant, t'a l'impression que tu va te faire mouiller non
Bangoustine 1 year ago
nazistuff xD
MyMMC 1 year ago
I love how germans just mash words together
icouldntmakeupaname2 1 year ago 2
lawl now go and secure the munitions point =-D
GamerJer 1 year ago 63
@GamerJer haha, company of heroes :P
cuzgandalfgothigh99 11 months ago 2
@GamerJer LOL! Company of Heroes. xD
pzmaus 6 months ago 4
@GamerJer Hahahaha!
antonarset 5 months ago
@GamerJer hahahaha company of heroes :)
JohannBrigtsenNOR 5 months ago 3
they see me schwimmin', they hatin'
ApocDevTeam 1 year ago 2
german engineering is awesome!! 100/5
ikmal017 1 year ago 2
Hahahaha! Schwimm :D
Cike28 1 year ago
Fuck waiting in Rush Hour Traffic on a Bridge...take the Short Cut and save money on the Toll!
EvilFingers 1 year ago
@EvilFingers
MrPalfreyman001 1 year ago
@MrPalfreyman001
Yes?
EvilFingers 1 year ago
@EvilFingers this thing only drive's 50km/h,
when u leafe there will be no traffic-jam anymore xD
MyMMC 1 year ago
@MyMMC
Not where I live.
EvilFingers 1 year ago
hope it still schwimms
greenteen85 1 year ago 50
le chauffeur est un d mes profs
scratch701 2 years ago
Wow. I've never seen a newer video of a Schwimmwagen actually in the water!
seaweed555 2 years ago
Ahh the 166 is wicked I got to ride in one about 15 minutes or less and it was awesome.
arbeitemachtfrei 2 years ago
I bet that one could make the body as well as the other components out of fiberglass, kevlar or carbon fiber.
MontanaCombatMedic 2 years ago
Yea you probably could. Never thought of it.
arbeitemachtfrei 2 years ago
I worked for Ravon Street Rods here in Billings, Montana for three years and I made a few molds off of car bodies and sub-components some times as well as a lot of cars from those molds over the years that I worked there. I bet you could make a lot of the body parts and sub-assembly parts the same way and utilize beetle steering and drive train systems for the rest. The only real fabrication challange would be the propeller and it's drive system. Reproduction Schwimmwagons market anyone?
MontanaCombatMedic 2 years ago
Yea! If you make one. I will try to scrounge up enough to get one.
arbeitemachtfrei 2 years ago
CorZr1 nobody is getting rid of them
Elephatintheroom01 because why have a schwimmer we have gunships nows
KanzlerM because if the wheels dont turn as easy it still has ground under it
totenkopf your name means DeathsHead why would you laugh it swims
arbeitemachtfrei 2 years ago
ok guys that Schwimmwagen was produced between 1941 to 1944 only the german army aka the SS could get them but they was also handed out for the regular germany military during the time there were a total of 15,584 Type 166 Schwimmwagen cars were produced; 14,276 at Fallersleben and 1,308 by Porsche. Only 133 are known to remain today, and only 13 have survived without restoration work. unfortunately i dont have one but i have rode in one the backseat is very cramped but it is fun
arbeitemachtfrei 2 years ago
where can i buy one
CorvZr1 2 years ago
60 years ago you would have been given one for a modest fee.
youpullitcamaro 2 years ago
Why dont they make these nowadays?
Elephantintheroom01 2 years ago
because every one is stupid
herbienbrian 2 years ago 3
Why didn't the propellor go down into the water?
KanzlerM 3 years ago
not deep enough water
Yarder122 2 years ago
id laugh if the water was deep
totenkopf00000000000 3 years ago
why? it's a swimmwage :) it swims :p
HSstriker 3 years ago