@racerabbit82 Dude -- these are just some of my tools-- dont judge if you got better or more because of a quick video..I seriously doubt you have more than me anyway these are just small boxes i have at work and it isnt the box its the tools that count...I guess i will have to make some videos of my seven other BIGGER boxes lol...
I have one of those inova/snap-on flashlights, the one with 5 led's. I don't like it one bit, not very bright. I've been using a streamlight strion for some time now and I highly recommend it, if you don't mind spending $130 + dollars on a flashlight.
I hear that if a regular Joe Blow has a broken snap on tool, and goes up to a snap on truck, he does not even acknowledge you because your not a really a snap on customer. Is that true?
If Americans insist on buying American again, dont you think Walmalt would respond buy stripping the shelves of Chinese Junk? Walmart sells only what folks are willing to buy. THINK!
Well no Sears dont but snap on better cause they dont have a store hear. Yea sears lets you run a tab its called a Sears credit card.You can walk out with tools not paid for yet. Sears better take a broken tool back cause they are lifetime.Snap-on bitches they dont want to replace sertain tools, like my rubber hammer or drile bits. Check out my videos and you will see my $5,500 Snap-on box out. Hell its no better then the rest realy but i wanted it. No way i would of paid list $10,000 lol
You have some nice tools and I am guessing your a body guy however that screw gun is my question. I have the same gun and love it but do you have the same problem I do? The goddamn battery don't last for shit. LOL. They recharge real fast and with two its not a problem for me but it seems like I change batteries every 10 minutes.
@woodzo40 I buy Mac tools which are about as expensive but there's a good reason they cost what they do:
#1 they are hands down some of the best hand tools in the world
#2 they perform batter and last longer
#3 IF you ever do break one or wear it out, you just walk onto the truck and they swap it for a new one, no receipt needed, you don't even have to prove you purchased it.
#4 they're 99% American made & the other 1% is made in Germany or small plastic things from China that don't matter.
@zapwatt Oh yea i know. I have a bunch of snap on. I just think $130.00 for a set of screw drivers is nuts.Im so glad i have all my shit now cause if i was starting out today no way i would buy and spend them prices in this economy.and you are right on Snap-on . I will say i wore out 4 craftsman ratchets and my snap -on never has missed a click. Its a bitch to wait a week for a tool when you can drive 10 min to sears and get one..
"I just think $130.00 for a set of screw drivers is nuts."<--- well you can go to Lowe's hardware store and carefully look at the packages because half of the Kobalt stuff is made in the USA and will say so right on the packing, sometimes says so right on the tool. . . .
. . . As far as the price of Mac or Snap On being "nuts" lemme ask you this; does Sears visit you every Thursday to see what you need? Does Sears let you run a tab like a pub does, with no credit check and just pay $15-$20 a week and let you have the tool right away before you've even paid for it? Will Sears take any broken tool back, no questions asked, five years later with no receipt? And as far as waiting a week for a tool; I make one phonecall to the Mac man and he burns rubber!
nice tools man, i just purchased some of these tools i think they're worth over 10,000 and some people told me that i'm stupid for buying those tools but i'm thinking of buying more tools, i mean some stupid guys just talk and don't know anything, like marioramirezcruz.
Looks like shit for brains @fksnapon closed his account, that means he will probably come back on here under a new name and AGE! Looks like you were right @jerryme72 LOL!
But he will still just be a dumbass talking shit...
@fksnapon I asked my snap on dealer about pliers and he said snap on makes their own pliers--he also sells knipex pliers on his truck but nobody buys them and i checked them out and they are not even close to as nice snap on pliers are...
@fksnapon What do you mean "OEM Supplier"...I looked this up and I got what I expected as a response, "China Trade Key" web site that apparently imports all kinds of things. So is it snap-on or Knipex or both have tools that are sourced from chain and beyond???? Just asking because I really don't know..............
I don't see the point in dropping huge amounts of credit on tools you'll end up NOT using in 5 years... most of you "Techs" can't unscrew your way out of a paper bag... I laugh at your idea of "service work"... essentially you don't know what or how to fix the problem and just start replacing parts... I've seen enough of you hotshots loose boxes and cry over bloody knuckles... you are all the same, no pride in work, full of entitlement, and bamboozled by the pretty sales fliers from snappy.
There seams to be a bunch of dumbass shit talkers here on youtube, and as for you LOOSER, the ONLY reason you talk shit about Snap on is because you can't afford them...and for you to assume that everyone has to take out a line of credit to afford a good box of tools goes to show your "quality" work is keeping you in the poorhouse! Probably because your "work" is not so "quality" after all...
Uh, Knipex makes the pliers for snapon... also make pliers for Matco, Mac, etc... Hell, Matco screw drivers are GERMAN made by a GERMAN company. Half of Snapon's sht isn't even made in America anymore, their ratchets seem to be loosing the "USA" stamp.
Snapon is overpriced, over hyped crap. I've turned wrenches for a living for nearly 20 years now... most of my tools are German and TRUE American (SK, Armstrong)... I pay cash for my tools, your box will be repo'ed.
marioramirezcruz? I just looked up all of that shit... they sell knipex at sears... if a craftsman and a knipex were next to each other i'd buy the crafstman... most of my stuff is snapon. I would let someone shit down my throat before i bought Knipex-Wera-Hazet-Felo. Fuck that and fuck you you no good, god damn, no tool knowin piece of shit!
@marioramirezcruz you got no idea about tools...you stick with your empty ideas..nobody buy those kipex-wera -hazet...felo..--nobody sells them or buy them..you call snap on fucking crap..you shit head...you hate on yourself..why ?you cant afford them..whole world uses snap on-mac -matco...you are sick shit..go see doctor if you got money ,you got no shit
where at in PA do you work at ?
cbman96 1 week ago
What year is that tool box
polarisindy650 3 weeks ago
@polarisindy650 the top box or the bottom boxes?
jerryme72 3 weeks ago
Nice collection of tools are you a millwright automotive assembly plant?
burnoutking1971 4 weeks ago
@burnoutking1971 No I am a deisel tech/mechanic.Also a PA inspection mechanic.
jerryme72 3 weeks ago
@racerrabbit82 Jerry pwnd you
TOOLREVIEWSANDMORE 1 month ago
real nice set up your a body man right
mikono14 1 month ago
@mikono14 No, but I do body work sometimes...
jerryme72 1 month ago
4:10 What in the hell is that?
riley191919 1 month ago
@riley191919 do you mean the hammer?
jerryme72 1 month ago
@jerryme72 Yes, what kind of hammer is that?
riley191919 1 month ago
@riley191919 Those hammers are for doing autobody work an example would be for pounding out a dent...
jerryme72 1 month ago
@saleenonly its more like 50,000 grand later.
010000100000 2 months ago
Is Par-X a division of snap on? They have a whole lot of similar looking tools
Gigglyable 2 months ago
@Gigglyable I am not 100% sure but I do believe par-x is made or marketed by snap on...
jerryme72 2 months ago
haha get a better box ... my collection kills yours by far , but props for buying good tools man keep going !!
racerabbit82 2 months ago
@racerabbit82 Dude -- these are just some of my tools-- dont judge if you got better or more because of a quick video..I seriously doubt you have more than me anyway these are just small boxes i have at work and it isnt the box its the tools that count...I guess i will have to make some videos of my seven other BIGGER boxes lol...
jerryme72 2 months ago
@jerryme72 Lets not get a tool fight going it really doesn't matter just keep on wrenching/
TechnicolorWrench 2 months ago
@jerryme72 totally agree with you bro! tools are more important than some fancy box
soccrplayer209 1 month ago
10,000 dollars later
saleenonly 3 months ago
I have one of those inova/snap-on flashlights, the one with 5 led's. I don't like it one bit, not very bright. I've been using a streamlight strion for some time now and I highly recommend it, if you don't mind spending $130 + dollars on a flashlight.
eurokid83 3 months ago
@eurokid83 Yeah I bought that light awhile ago and it was bright then but now there are some nice flashlights on the market...
jerryme72 3 months ago
I have that same Snap on flashlight and damn it is bright.
GarrettJDB 3 months ago
Even though I have no affiliation with the auto repair industry, I will always respect true mechanics.
eBiology 3 months ago
Are you from MN? I like the 103.5 playing
wmstr353 4 months ago
@wmstr353 No i am from PA and i think it was 96.1 cat country lol...
jerryme72 4 months ago
@jerryme72 No shit I used to live in Allentown, haha it's a small world.
racedriver52 4 months ago
@racedriver52 I live about 40 minutes from allentown...
jerryme72 4 months ago
@jerryme72 thunder 106.3 is what we listen to in jersey
Gigglyable 3 months ago
Comment removed
wmstr353 4 months ago
I hear that if a regular Joe Blow has a broken snap on tool, and goes up to a snap on truck, he does not even acknowledge you because your not a really a snap on customer. Is that true?
xwing29 4 months ago
@xwing29 I believe that is at the discretion of the tool man and it has nothing to do with the snap on company...
jerryme72 4 months ago
I get 50% discount and 5000 dollars to spend on snapon FROM snapon. Im excited as tits
capufool 5 months ago
@capufool how did you get that discount?
TDHReviews 4 months ago
@TDHReviews im an auto mechanic student
capufool 4 months ago
@capufool I get the 50% discount also but why did they give u $5000 to spend on their tools
TDHReviews 4 months ago
You got a lot of kickass tools
jchan3123 5 months ago
this is an amazing video
jackduup 5 months ago
oh...Snap On..... I get it...and now I will snap off.
Sorman26 6 months ago
i dont fucking know why u need 12 ratchets
thierryxxthierry 6 months ago
oh ive just seen a lot of mechanics with them the other way but i guess whatever works right lol
drummerboyandrew1 7 months ago
hey you have your sockets upside down on your holder
drummerboyandrew1 7 months ago
@drummerboyandrew1 they are not upside down...they are supposed to go in that way!!!lol
jerryme72 7 months ago
nice tools man
dregsta 10 months ago
If Americans insist on buying American again, dont you think Walmalt would respond buy stripping the shelves of Chinese Junk? Walmart sells only what folks are willing to buy. THINK!
MegaGarrett07 11 months ago
@MegaGarrett07 tools are different man, no one is going to buy chinese tools use your head
poskyflyer 10 months ago
Well no Sears dont but snap on better cause they dont have a store hear. Yea sears lets you run a tab its called a Sears credit card.You can walk out with tools not paid for yet. Sears better take a broken tool back cause they are lifetime.Snap-on bitches they dont want to replace sertain tools, like my rubber hammer or drile bits. Check out my videos and you will see my $5,500 Snap-on box out. Hell its no better then the rest realy but i wanted it. No way i would of paid list $10,000 lol
woodzo40 1 year ago
You have some nice tools and I am guessing your a body guy however that screw gun is my question. I have the same gun and love it but do you have the same problem I do? The goddamn battery don't last for shit. LOL. They recharge real fast and with two its not a problem for me but it seems like I change batteries every 10 minutes.
HunterCO1 1 year ago
Snap on prices are crazy like gas prices. Bend over im comming in lol.
woodzo40 1 year ago
@woodzo40 I buy Mac tools which are about as expensive but there's a good reason they cost what they do:
#1 they are hands down some of the best hand tools in the world
#2 they perform batter and last longer
#3 IF you ever do break one or wear it out, you just walk onto the truck and they swap it for a new one, no receipt needed, you don't even have to prove you purchased it.
#4 they're 99% American made & the other 1% is made in Germany or small plastic things from China that don't matter.
zapwatt 1 year ago
@zapwatt Oh yea i know. I have a bunch of snap on. I just think $130.00 for a set of screw drivers is nuts.Im so glad i have all my shit now cause if i was starting out today no way i would buy and spend them prices in this economy.and you are right on Snap-on . I will say i wore out 4 craftsman ratchets and my snap -on never has missed a click. Its a bitch to wait a week for a tool when you can drive 10 min to sears and get one..
woodzo40 1 year ago
@woodzo40
"I just think $130.00 for a set of screw drivers is nuts."<--- well you can go to Lowe's hardware store and carefully look at the packages because half of the Kobalt stuff is made in the USA and will say so right on the packing, sometimes says so right on the tool. . . .
zapwatt 1 year ago
@woodzo40
. . . As far as the price of Mac or Snap On being "nuts" lemme ask you this; does Sears visit you every Thursday to see what you need? Does Sears let you run a tab like a pub does, with no credit check and just pay $15-$20 a week and let you have the tool right away before you've even paid for it? Will Sears take any broken tool back, no questions asked, five years later with no receipt? And as far as waiting a week for a tool; I make one phonecall to the Mac man and he burns rubber!
zapwatt 1 year ago
Wow, I need to start buying snap on stuff, right now everything I have is basically from harborfreight
racedriver52 1 year ago
@racedriver52 your knuckles feel much better with snap on
Chevydipper1500 1 year ago
You only have to pay 25 clams a week!!!!!!!!!!
jerryme72 1 year ago
I wish I had more Snap-on tools, but if I did I'd probably become homeless, LOL!
mrstrictlygm 1 year ago
nice tools man, i just purchased some of these tools i think they're worth over 10,000 and some people told me that i'm stupid for buying those tools but i'm thinking of buying more tools, i mean some stupid guys just talk and don't know anything, like marioramirezcruz.
megajosecuevas 1 year ago
how much is that collection worth?
biddymagee 1 year ago
@biddymagee I spend around 4000 on tools each year....
jerryme72 1 year ago
is that craig morgan playing in the background?
jjlwis 1 year ago
@jjlwis I dont know it is whatever was on 96.1 fm...
jerryme72 1 year ago
@jjlwis song is backwoods by justin moore
heathmeador 1 year ago
@heathmeador ha, nice....
jjlwis 1 year ago
@jjlwis no it was justin moore-backwoods
mrmopar7273ty3 1 year ago
@jjlwis
No that would be justin moore's backwoods. great song. all justin's stuff is. all I play in the shop is country 24/7
EFSOutdoors 1 year ago
snap-on makes good tool, but sadly they can get lost as easly as cheap tools
dalekrueger 1 year ago
@dalekrueger thats why i keep them in a locked tool box...lol
jerryme72 1 year ago
@zachandjerica Crapsman*
MDizzel16 1 year ago
nice tools
shiznit480 1 year ago
Nice Nice Tools!! Judging by the hammers, Do you work at a body shop?
radimus323 1 year ago
@radimus323 I work at a public school district as a diesel mechanic but I do alot of body work on the buses...
jerryme72 1 year ago
@radimus323 By the way I also have another tool video if your interested...
jerryme72 1 year ago
Good Collection!!!
cesmegi1 1 year ago
Look up "OEM Supplier"... it is eye opening.
fksnapon 1 year ago
Looks like shit for brains @fksnapon closed his account, that means he will probably come back on here under a new name and AGE! Looks like you were right @jerryme72 LOL!
But he will still just be a dumbass talking shit...
ESPsandEmgs 1 year ago
@fksnapon I asked my snap on dealer about pliers and he said snap on makes their own pliers--he also sells knipex pliers on his truck but nobody buys them and i checked them out and they are not even close to as nice snap on pliers are...
jerryme72 1 year ago
@fksnapon What do you mean "OEM Supplier"...I looked this up and I got what I expected as a response, "China Trade Key" web site that apparently imports all kinds of things. So is it snap-on or Knipex or both have tools that are sourced from chain and beyond???? Just asking because I really don't know..............
triplexgearjammer 1 year ago
I don't see the point in dropping huge amounts of credit on tools you'll end up NOT using in 5 years... most of you "Techs" can't unscrew your way out of a paper bag... I laugh at your idea of "service work"... essentially you don't know what or how to fix the problem and just start replacing parts... I've seen enough of you hotshots loose boxes and cry over bloody knuckles... you are all the same, no pride in work, full of entitlement, and bamboozled by the pretty sales fliers from snappy.
fksnapon 1 year ago
@fksnapon
There seams to be a bunch of dumbass shit talkers here on youtube, and as for you LOOSER, the ONLY reason you talk shit about Snap on is because you can't afford them...and for you to assume that everyone has to take out a line of credit to afford a good box of tools goes to show your "quality" work is keeping you in the poorhouse! Probably because your "work" is not so "quality" after all...
ESPsandEmgs 1 year ago
Comment removed
fksnapon 1 year ago
Comment removed
fksnapon 1 year ago
@fksnapon You are an asshole fella your page says your 31 so you have made a living turning wrenches since you turned 11 fuck off you dick
jerryme72 1 year ago
@ the knuckle draggers below-
Uh, Knipex makes the pliers for snapon... also make pliers for Matco, Mac, etc... Hell, Matco screw drivers are GERMAN made by a GERMAN company. Half of Snapon's sht isn't even made in America anymore, their ratchets seem to be loosing the "USA" stamp.
Snapon is overpriced, over hyped crap. I've turned wrenches for a living for nearly 20 years now... most of my tools are German and TRUE American (SK, Armstrong)... I pay cash for my tools, your box will be repo'ed.
fksnapon 1 year ago
Seville, don't be an ass, not everyone can afford snapon
thizguy94 1 year ago
marioramirezcruz? I just looked up all of that shit... they sell knipex at sears... if a craftsman and a knipex were next to each other i'd buy the crafstman... most of my stuff is snapon. I would let someone shit down my throat before i bought Knipex-Wera-Hazet-Felo. Fuck that and fuck you you no good, god damn, no tool knowin piece of shit!
deville9549 1 year ago
kipex,wrea,hazet,felo...wtf...this is america no one buys that shit...no one sells that shit...and if they did,it would be a joke.
IR4410AP 1 year ago
dont feel t proud of these fucking crap. get yourself Kipex- wera- Hazet - Felo
forget it you dont Know what I am talking about. dont ever upload a single image your sanp-on
marioramirezcruz 1 year ago
@marioramirezcruz you got no idea about tools...you stick with your empty ideas..nobody buy those kipex-wera -hazet...felo..--nobody sells them or buy them..you call snap on fucking crap..you shit head...you hate on yourself..why ?you cant afford them..whole world uses snap on-mac -matco...you are sick shit..go see doctor if you got money ,you got no shit
ibnekurdo 1 year ago