I.d like to bolt this on the tail end of a hang glider... I wonder if you could heat the water at the point of exit like those special taps that eliminate the need for a geyser... maybe with a blow torch?
There are waterproof explosives I believe. How about this: rather than slowly heating the water & subjecting the reservoir to prolonged high pressure & thermal stress, how about inserting a waterproof pyrotech into it, which you can touch off electronically? The ignition can introduce high pressure gas into the reaction chamber, & flash-heat the water into steam @ the same time. Nothing is subject to any great stress until it's converted directly into thrust.
Hi, I'm Alex. I am a undergraduate aerospace engineer from CalPoly SLO, USA. I am currently designing a steam rocket as a side project partly due to me stumbling on the aquarius website a while back. However I do have questions.
How do retain the water before firing? How much air or steam expansion space do you leave in the tank?
Hi Alex. I'm sorry to say that I have no practical experience with steam rockets. My only knowledge is theoretical and comes from the net and friends with similar interests.
I have been thinking about making a steam rocket too but have never gotten around to it.
To answer your questions, I can only state how I would do myself, which may be far from optimal given my lack of experience.
Anyway, properly warned, I'll be happy to share my thoughts.
...Retaining the water before firing, I would make a strong tank with an electronically activated nozzle allowing for a safe release of the superheated water.
Of steam expansion space I would actually leave next to no space. As little as possible. I don't see what good such a space would do. But then again, I may well be wrong.
...It appears to me that it is the tank that is the critical component here. It needs to hold a pressure of 100+ bars at a temp. of 350 deg. celcius. The temperature alone excludes the use of aluminum I think - ordinary alu. anyway.
I guess I would go for a well insulated steeltank with a built in electrical heatingelement, at least 2 temp. gauges and a pressure sensor as well so temp. and pressure can be monitored remotely and reliably during heating.
...All of this of course needs to work reliably with the high temperature and pressure.
Steam rockets are quite powerfull and carrying the extra weight of a well dimensioned electrical heating element and some insulation should be no problem.
How can this rocket be propelled by superheated water ? Is there some kind of storage tank inside with fresh 100+ degrees water, which is then mixed with some substance or ?
It can be done. Superheated water in its vapor state can be treated the same as a compressed gas such as argon, nitrogen, helium,etc... By taking this pressure energy and converting it to kinetic energy through a converging/diverging delaval nozzle we get thrust.
I.d like to bolt this on the tail end of a hang glider... I wonder if you could heat the water at the point of exit like those special taps that eliminate the need for a geyser... maybe with a blow torch?
FIREHAWK1979 3 months ago
Anyone wanting to see the world's coolest steam rocket check out Mech-Sci.com
bobosharkey 3 months ago
germans are cool
TRONhack3r 6 months ago
There are waterproof explosives I believe. How about this: rather than slowly heating the water & subjecting the reservoir to prolonged high pressure & thermal stress, how about inserting a waterproof pyrotech into it, which you can touch off electronically? The ignition can introduce high pressure gas into the reaction chamber, & flash-heat the water into steam @ the same time. Nothing is subject to any great stress until it's converted directly into thrust.
niflap 8 months ago
wo war das?
iceblader95 1 year ago
SO MANY AWESOME THINGS TO DO
Zappyguy111 1 year ago
holy shit it broke the sound baRRIER
Cloakedsphere 2 years ago
@Cloakedsphere broke your caps lock key too... jk
catman529outdoors 1 year ago
@Cloakedsphere or maybie the moment at the roket was go emty
Pujc 9 months ago
this would be great at air shows
datzfast 2 years ago
Hey this idea is so cool
nicksynnz 3 years ago
Very cool! Steam rockets are awesome.
gk123434534 3 years ago
It's that a sonic boom in 00:20 ???
tintin27udec 3 years ago 2
i think a sonic boom would be much louder, and that rocket chouldn't accelerate at about 15m/s*s, and it would explode before it reaches 1188 km/h
dudiadi1 3 years ago
Cool rocket :)
LordHypson 3 years ago
I was thinkin about making a steam rocket. I didn't realise someon els hough of it first!
thepsiborg 4 years ago
Hi, I'm Alex. I am a undergraduate aerospace engineer from CalPoly SLO, USA. I am currently designing a steam rocket as a side project partly due to me stumbling on the aquarius website a while back. However I do have questions.
How do retain the water before firing? How much air or steam expansion space do you leave in the tank?
Alexpaths 4 years ago
Hi Alex. I'm sorry to say that I have no practical experience with steam rockets. My only knowledge is theoretical and comes from the net and friends with similar interests.
I have been thinking about making a steam rocket too but have never gotten around to it.
To answer your questions, I can only state how I would do myself, which may be far from optimal given my lack of experience.
Anyway, properly warned, I'll be happy to share my thoughts.
jensjacob 4 years ago
How dangerous is it a large rocket of this type were used to give a 2000lbs car a little extra thrust?
jonnyrockit 4 years ago
...Retaining the water before firing, I would make a strong tank with an electronically activated nozzle allowing for a safe release of the superheated water.
Of steam expansion space I would actually leave next to no space. As little as possible. I don't see what good such a space would do. But then again, I may well be wrong.
jensjacob 4 years ago
...It appears to me that it is the tank that is the critical component here. It needs to hold a pressure of 100+ bars at a temp. of 350 deg. celcius. The temperature alone excludes the use of aluminum I think - ordinary alu. anyway.
I guess I would go for a well insulated steeltank with a built in electrical heatingelement, at least 2 temp. gauges and a pressure sensor as well so temp. and pressure can be monitored remotely and reliably during heating.
jensjacob 4 years ago
...All of this of course needs to work reliably with the high temperature and pressure.
Steam rockets are quite powerfull and carrying the extra weight of a well dimensioned electrical heating element and some insulation should be no problem.
Well, just my 5 cents.
Good luck.
And take care.
JJ
jensjacob 4 years ago
How can this rocket be propelled by superheated water ? Is there some kind of storage tank inside with fresh 100+ degrees water, which is then mixed with some substance or ?
Zwaffelen 4 years ago
It can be done. Superheated water in its vapor state can be treated the same as a compressed gas such as argon, nitrogen, helium,etc... By taking this pressure energy and converting it to kinetic energy through a converging/diverging delaval nozzle we get thrust.
Alexpaths 4 years ago
cool! can you buy it at toys'r'us?
usuallycalledmark 4 years ago