@staggerlax27 no they dont, u can still find them in a lot of places for cheap but smart parts is no longer existing...they came back as GOG paintball and all the guns they came out with are all almost the same as the smart parts but yea...
I have some awesome paintball stuff up for sale and auction on ebay... You guys should take a look at it for serious... just search Smart Parts Ion Paintball Marker with Black Heart Board Plus Extras
I got the stock ION with CP reg ( a must), 200 psi performer, quiet consistent gun. I use it with eyes off halo b hopper with a freak barrel. Not the sickest, etc, great performer. The ion is the tippmann a5 of speedball...
how can you tell if your paintball gun fps is high because when mine hits the metal trashcan it sounds like it's way up there mine i can adjust it but i don't know which way is turning it down.
Sweet gun mike, could you do a show on the basic ion? i just purchased one for the local speedball place that just opened up. Also i have a crossfire 68/4500 tank and a Evo 3 hopper, i know you'll recommend upgrading the feedneck. But anything else you recommend upgrading? Any suggestions welcome thanks man! sweet gun again.
also if you could about how to disassemble and clean it and stuff id appreciate it. Im used to woods ball and tippmann lol. so id love to know what im doing before i fuck my gun up
hey i was just wondering if my gun is gunna be fucked i have an ion and i took a 90z co2 tank and put it on my gun i do not have the anti-siphon tube. and all i did was take like 10 shots out of it and i am going paintballing tommorow and i am boroowing a friends hpa tank do u think i will be fine?? thanks
@KillERddS3 luckly it wasnt :) i took it out to the field and it was shooting perfect so i was preety happy about that all i noticed is that the velocity was rangeing a bit more than it youshally does it was shooting from 286 to 295 so all around i was still pretty happy
What you did is ok, I upped my ion and it's alot better then this ion the only difference is a better reg, a 100 X's better barrel kit and a new body, the virture oled is amazing though I am in love with it also if you don't have a good hopper that will keep up with the virture board just buy a rotor or if your tight for money get an upgraded board for you hopper
Jesus christ. I'm not saying the gun is bad, but it looks like a bitch to take apart and reassemble just for basic maintenance. I was thinking about getting one of these as my first e-marker (pump ftw) but that's just way too much.
@OokamiDoragon Yea they arnt that bad after u do it once or twice. I tore mine apart 5 times in like 10 mins cause my trigger was sticking bad. Just be careful if u do get one taking it aprt the first time, just like any other gun lol
hey do you know what is the best setting for a stock board on a smart parts ion.. what should i set the dwell to and the rate of fire. i just want to use semi automatic.
@MaNGLeDSHaDoW actualy there are conversion kits you can buy i found one shortly after posting this its essentially a new upper body with the bolt out the back
i dont see why people dont like ions and why they say thay suk. if u up it then its a good shooting gun. i dont own one but my friend does and its nice as hell. lol
@FreeTwinkWannaBe i got my xe for 300 bucks but that was 2 years ago. id say 225 ish for the gun 185 for the oled. 35-45 for the feed neck. idk bout anything else.
the only thing iv found out about the ions stock board is that it miss fires alot because the other day i was playing with it and it shoot me in the foot 3 times i hated it. because i was just holding the gun and it randomly shot my friend right in the butt and guess what! my finger was not even on the trigger!!!!
is the ion now called something different because of smart parts changing to GOG? becuase i have been trying to find one to buy and i havent been able to.
odd question but where the fuck did u get that toolbox im in aus so watching paintball vids is the best i can do unless i wanna spend up to 600 bucks for one days play. any way i need a good toolbox for my archery gear it would be perfect
@46carnage It's just a cheaper high end marker that pretty much everyone, including me, has one. Some people say they are bad quality but I love my ion
what to upgrade on dp g3? im trying to make it as good as possible. its stock right now but i got like 200 bucks to upgrade, i dont wanna buy a board though
Mike, please help me. I have a regular Ion and i didnt know about the feedneck issue. I sanded down my Halo B Victory 35 to fit the stock one, realized it wouldnt feed so i just bought a new locking feed neck... will the new feed neck still work with a sanded hopper feed neck?
Whrre did u get the grip
Dennis20326 8 hours ago
My name is jd!:)
hahahahanuts 1 day ago
Do they make ions anymore
staggerlax27 1 week ago
@staggerlax27 no they dont, u can still find them in a lot of places for cheap but smart parts is no longer existing...they came back as GOG paintball and all the guns they came out with are all almost the same as the smart parts but yea...
jgptmd 3 days ago
MIKES HARDCORE
rayallenwhoelse21 1 week ago
his five bucks vrs his twenty
ColeZonVacation 1 week ago
u like lube don't you?
ColeZonVacation 1 week ago
i have the same gun wiht all of those attachments.
ColeZonVacation 1 week ago
thats awesome
michael98134 1 week ago
THATS A BADAS ION I WISH MINE WAS LIKE THAT
1212dgriff 1 week ago
i dont care what people say about ions but i love mine so far ive upgraded the feedneck asa and trigger next is going to be the vitrue board
nightraidernow 2 weeks ago
Damn. You just tower over people.
FIERC3Punisher 3 weeks ago
i have this gun it is amazing
paintballman34534 3 weeks ago
Azodin uses autococker threads
Paintballspazz 3 weeks ago
i never realized how tall you were until this video
uidk 1 month ago
does anyone know if azodin uses the same barrel threads as spyder
tot810 1 month ago
@tot810 No, They use autococker threads.
GerFallschirmjager 1 month ago
mean*
mrbmxking6 1 month ago
what does barrel id do?
mrbmxking6 1 month ago
@mrbmxking6
It's the bore of the barrel.
Crosswalkopie 3 weeks ago
How much did that cost
MrMatta242 1 month ago
ANOTHER ONE PLZ!
brunor50 1 month ago
ION is the SHIIIIIIT!!!! :D
xx666xx666 1 month ago
Save a rock, throw an ion!
GraffPaint85 1 month ago
Save a rock, throw an ion!
GraffPaint85 1 month ago
penis
Predator2169 2 months ago
I have some awesome paintball stuff up for sale and auction on ebay... You guys should take a look at it for serious... just search Smart Parts Ion Paintball Marker with Black Heart Board Plus Extras
heav85 2 months ago
when i think of an ION, i think of PBNation, when i think of PBNation, i think of an ION.
xXKinGofbLadEsXx 2 months ago
@amatthew7861 no ions are not they won't they were budget electros that didn't work well unless upgraded and recent markers still
Cutterj715 2 months ago
Comment removed
Predator2169 2 months ago
i have a question, with smart parts going out of business, would the ion be considered a "collectible" marker?
amatthew7861 2 months ago
I got the stock ION with CP reg ( a must), 200 psi performer, quiet consistent gun. I use it with eyes off halo b hopper with a freak barrel. Not the sickest, etc, great performer. The ion is the tippmann a5 of speedball...
mazpr2025 2 months ago
anyone think its a green screen
Laughinggas24 3 months ago
Comment removed
Predator2169 3 months ago
44 people have bonestock ions
TPBYoshi 3 months ago
sexy gun
BBURG3R 3 months ago
where you get the grips from
JerksForever 3 months ago
custom products..................
BrainHarvester 3 months ago
15:30 rear whore xD
AAVince2513 4 months ago
how much would it cost to get all the upgraded parts that you put on it?
marines170675 4 months ago
Comment removed
marines170675 4 months ago
you should do another one of these show of deaths
downrightairsoft 4 months ago 18
I have a Ion, I am a beginner, what is a good barrel to start with other then the stock one it cones with..
Thanks.
thegeb2909 4 months ago
@thegeb2909 cp or freak 2 piece kit
Predator2169 4 months ago
tht asa if its direct mount not easy to turn on in off at all
Tht1guy63 4 months ago
"FUCKIN' WILLIE!!" :P
Predator2169 4 months ago 8
ions are like organisms in your hands!
nonstopraid 4 months ago
ions are like organisms in your hands!
nonstopraid 4 months ago
how can you tell if your paintball gun fps is high because when mine hits the metal trashcan it sounds like it's way up there mine i can adjust it but i don't know which way is turning it down.
matthewmarrs123 5 months ago
to OSKWolfpackPB i am getting one soon i haven't really owned one before i own a spyder electra right now and im getting a parts ion in a trade.
matthewmarrs123 5 months ago
did you get shot at 18:52 mike?
matthewmarrs123 5 months ago
i bet that was hard to concentrate making because of the game lol great video!
matthewmarrs123 5 months ago
that is a sexy ion, seriously
GerFallschirmjager 5 months ago
only $440 in that ion xe
lunatiy 5 months ago
Sorry mike but I honestly think you wasted time and money id rather upgrade a vibe or blitz or mini something worth a while
AAVince2513 5 months ago
Comment removed
tvane1225 5 months ago
18:52 aw
MrJovanney 5 months ago
Is that a CP grip frame?
evvans101 5 months ago
what became of this incredible ion?
stephensk82003 5 months ago
does your wife play paintball
joeymendez4538 5 months ago
Sweet gun mike, could you do a show on the basic ion? i just purchased one for the local speedball place that just opened up. Also i have a crossfire 68/4500 tank and a Evo 3 hopper, i know you'll recommend upgrading the feedneck. But anything else you recommend upgrading? Any suggestions welcome thanks man! sweet gun again.
AaronElliott10 5 months ago
@AaronElliott10
also if you could about how to disassemble and clean it and stuff id appreciate it. Im used to woods ball and tippmann lol. so id love to know what im doing before i fuck my gun up
AaronElliott10 5 months ago
Not to hate but ions are ugly I'd rather upgrade an azodin blitz it's more industry standard an I can get crappy spyders and use most of it's things
AAVince2513 6 months ago
5:52 did anyone else see that guy like chuck that pod
darrengerdude96 6 months ago
@darrengerdude96 Because thats how the pro's do it!!
Paintfreak123 5 months ago
Super good vid... Go look at my ion vid it's just a speed test
Y2KBreathless 6 months ago
holy crap, how many people are watching this live?
MrXgiftx 6 months ago
"hey man I just spent 5000 dollers to make my ion ok" "wow good idea I should have have thout of that i just bought my great ego for 1500 dollers"
camo1342 6 months ago
@camo1342 lol dollers
MonocleManly 6 months ago
This has been flagged as spam show
@MonocleManly i cant spell well
camo1342 6 months ago
This has been flagged as spam show
@MonocleManly i cant spell well
camo1342 6 months ago
Save a rock...throw an ion.
no1mini 6 months ago
ions are like tampons every pussy has one
Banditpaintball 6 months ago in playlist TechPB
hey i was just wondering if my gun is gunna be fucked i have an ion and i took a 90z co2 tank and put it on my gun i do not have the anti-siphon tube. and all i did was take like 10 shots out of it and i am going paintballing tommorow and i am boroowing a friends hpa tank do u think i will be fine?? thanks
justgiver161 6 months ago
@justgiver161 yes
KillERddS3 6 months ago
@KillERddS3 luckly it wasnt :) i took it out to the field and it was shooting perfect so i was preety happy about that all i noticed is that the velocity was rangeing a bit more than it youshally does it was shooting from 286 to 295 so all around i was still pretty happy
justgiver161 6 months ago
What you did is ok, I upped my ion and it's alot better then this ion the only difference is a better reg, a 100 X's better barrel kit and a new body, the virture oled is amazing though I am in love with it also if you don't have a good hopper that will keep up with the virture board just buy a rotor or if your tight for money get an upgraded board for you hopper
ttime212 6 months ago
what gun do you think i should get please respond.
#1 Dangerous Power Fusion FX
#2 Eclipse 2011 Etek3 LT
please respond need to no asap thanks
justgiver161 6 months ago
@justgiver161 eclipse !
ThaGamezOnline 6 months ago
Should I get a smart parts ion or a 09 spyder Electra
234Applereviews 6 months ago
@234Applereviews make the smart choice.
ThaGamezOnline 6 months ago
18:55 Mike:"Ow" Well lets hope he doesn't fuck the gun up while getting shot!
wowdontbeupset 6 months ago
i want that ion
empirepb210 6 months ago
how much would all those upgrades be to buy?
Nickskates96 6 months ago
you cant even call that an ion anymore
qwert123mt 6 months ago
you could tell mike was excited he keep saying HOLD ON when nobody was talking to him
RT1220PB 6 months ago
Make more vids like this
jabber810 6 months ago
its not really the color of the loctite that makes it stronger.. its the number.. no matter what color.. red, blue, green..
DiXi91 7 months ago
Everyone hating on IONS.. I like'em. Anyone agree?
OSKWolfpackPB 7 months ago 97
@OSKWolfpackPB haters gonna hate
BuckshotPaintball 6 months ago
@OSKWolfpackPB just needs some upgrades
Devo6666 6 months ago
@OSKWolfpackPB there ok
XIzuluIX 6 months ago
@OSKWolfpackPB They get better the more money you spend on em but, I like the mini better
xXBundleXx 4 months ago
@OSKWolfpackPB they arent bad besides the feedneck, cept my friends has random chop fests, even with lectronic hopper
laxm0nkey 4 months ago
i love how he says we are almost in the home stretch with 20 mins to go
iantobe 7 months ago
thought the black and gold looked cool
snapshootpaintball33 7 months ago
whats the upgrades called...what is the name of all those things...
nabilthegreat246 7 months ago
Jesus christ. I'm not saying the gun is bad, but it looks like a bitch to take apart and reassemble just for basic maintenance. I was thinking about getting one of these as my first e-marker (pump ftw) but that's just way too much.
OokamiDoragon 7 months ago
@OokamiDoragon Yea they arnt that bad after u do it once or twice. I tore mine apart 5 times in like 10 mins cause my trigger was sticking bad. Just be careful if u do get one taking it aprt the first time, just like any other gun lol
IwLyWd230 6 months ago
to all the ion haters, you see mike from techpb likes the ion, and he knows more and is a better player than any of us on here probably ever will be.
Jordman1337 7 months ago
hey do you know what is the best setting for a stock board on a smart parts ion.. what should i set the dwell to and the rate of fire. i just want to use semi automatic.
rtitocaz 7 months ago
Good tech. Bad player.
davidleolucas 7 months ago
@davidleolucas old guys cant help it lol
greasamar 7 months ago
"we've got a nice wind as you can feel" I dont have wind-o-vision mike sorry lol
junits15 7 months ago
9:41 lol wiggle it around!
MrPaintballKyle 7 months ago
Shit dude all that, I just would get a better gun
TheHungryArtist 7 months ago
where is this field at?
oits19 7 months ago
Comment removed
rtitocaz 7 months ago
@rtitocaz ansgear.com
TuFMaNe 7 months ago
I cant get my ion XE feed neck off. any tips?
scottjulio13 7 months ago
@scottjulio13 you a blowdryer to heat it then either use plyers or a belt wrench
WaKEbOarDeR5589 7 months ago
how many times did u get hit during this vidio.
bbradbowes 7 months ago
Comment removed
bbradbowes 7 months ago
of course, ION's always sucked and as soon as mikes godly hands touch that shit? it becomes sexy as hell.
InvertFire 8 months ago
mike, i'd buy one of these from you if you out it all together for $400
DanFProductions 8 months ago
@DanFProductions the ion alone is 300 and thats like 250 dollars worth of stuff he put on it
bignick703 7 months ago
somebody once asked me what the most powerful paintball gun was and i said the ion because it hurts when you throw it at people
paintballPB4LIFE 8 months ago 22
@paintballPB4LIFE ur dumb
89KxRider 8 months ago
@paintballPB4LIFE someone read the comment on mikes ion show
ilivemw2 4 months ago
@paintballPB4LIFE I LOVE YOU FOR THAT!!!
RangersRock17 4 months ago
ions suck but now i want one
chasefilming 8 months ago
Mike is there a way to convert a normal ion to an ion xe
AVsDproductions 8 months ago
@AVsDproductions no
MaNGLeDSHaDoW 8 months ago
@MaNGLeDSHaDoW actualy there are conversion kits you can buy i found one shortly after posting this its essentially a new upper body with the bolt out the back
AVsDproductions 8 months ago
i dont see why people dont like ions and why they say thay suk. if u up it then its a good shooting gun. i dont own one but my friend does and its nice as hell. lol
Tysonpaintballjunkie 8 months ago
whats better this gun or g4?
darrickwallace100 8 months ago
Total cost?
XxMLGxZEZExX 8 months ago
was there lock tight on the fittings
MegaPillowman 8 months ago
@MegaPillowman same battery
schulhoff18 8 months ago
what powers the lazer eyes
MegaPillowman 8 months ago
I would like to get my hands on that ion
thebradms 8 months ago
what became of this ion...its a badass
stephensk82003 8 months ago
hey mike plz respond i was wondering where i can get a new frame for my gun
MrRDR101 8 months ago
In total, how much does that Ion cost?
FreeTwinkWannaBe 8 months ago
@FreeTwinkWannaBe i got my xe for 300 bucks but that was 2 years ago. id say 225 ish for the gun 185 for the oled. 35-45 for the feed neck. idk bout anything else.
galbarow 8 months ago
So whats total cost of that gun?
FreeTwinkWannaBe 8 months ago
@FreeTwinkWannaBe way too much to be worth it......... -.-
ajonz9213 8 months ago
cuz we can feel the wind mike...
123imbro 8 months ago
shoulda used gold body
RelationzHD 8 months ago
This is the longest video I've seen on youtube haha
botbullet0 9 months ago
42 people dont have ions
chelseafcisbeast 9 months ago
@chelseafcisbeast
More like 42 people do have ions and there pissed at how bad they are! HA!
Thatonepersonz 8 months ago
the only thing iv found out about the ions stock board is that it miss fires alot because the other day i was playing with it and it shoot me in the foot 3 times i hated it. because i was just holding the gun and it randomly shot my friend right in the butt and guess what! my finger was not even on the trigger!!!!
nonstopraid 9 months ago
is it me or does it have a cp logo on the trigger frame lol
reaper18331 9 months ago
no wonder markers cost soo much, it takes like years to make them :D
asianoftheasians 9 months ago
Great video....same color scheme I wanted to go with...thanks!
machosos 9 months ago
Great video....same color scheme I wanted to go with...thanks!
machosos 9 months ago
This has been flagged as spam show
Please go check out and SUBSCRIBE to my channel I am going to start posting videos on paintball related things freqently.
TheDarknesscinema 9 months ago
mike...has.. balls... OF STEEL!!
thecrystalsaint 9 months ago
"Fuckin' Willie.." -Mike 33:16
VenomsCast 9 months ago 32
This has been flagged as spam show
Lol Best quote ever
Somebody asked on techpb forums: "whats the most powerful gun?"
Someone said: The ion because it hurts when you throw it.
askclan2016 10 months ago
how much would all this equipment run you?
AMomentSubmerged 10 months ago
is the ion now called something different because of smart parts changing to GOG? becuase i have been trying to find one to buy and i havent been able to.
mrcooldude3241678456 10 months ago
@mrcooldude3241678456 yeah its called the gog extacy it just came out on ansgear
cityfrags 9 months ago
@mrcooldude3241678456 Save yourself the headache and for the love of god, don't buy one!
URUNIK1LL 9 months ago
most poerful paintball gun: ion. Why? cuz it hurts when u throw it
bryanozzy2215 10 months ago
odd question but where the fuck did u get that toolbox im in aus so watching paintball vids is the best i can do unless i wanna spend up to 600 bucks for one days play. any way i need a good toolbox for my archery gear it would be perfect
ash6248 10 months ago
Comment removed
ash6248 10 months ago
Comment removed
xXP5YDUCKXx 10 months ago
was smart parts partnered with custom products or sumthin?cuz every time i see a smart parts marker it has cp stuff on it
kawboykody 10 months ago
@kawboykody
no, CP just makes some of the best after market parks. and at an awesome price!
lilW4life 10 months ago
I like the ion its fun to use, it just isnt a really good tourney gun its for fun or a backup
hse97 10 months ago
does the sp clamping feed fit in the normal ion
cocaobobo 10 months ago
hey mike whats the custom products on the frame? is that a sticker or is that a special frame?
brettline07 10 months ago
thats cool chingon iwant my ion xe just like that god bless u
yoshidye 10 months ago
what happened to..... take a alan wrench to take off battery......... -_- 21:41
lordruku524 10 months ago
wats so bad bout ions???
46carnage 10 months ago
@46carnage It's just a cheaper high end marker that pretty much everyone, including me, has one. Some people say they are bad quality but I love my ion
pballer3127 10 months ago
@46carnage nothing at all, people trash them because Smart Parts is out of buisness
LovinDatPaintball 10 months ago
@LovinDatPaintball oh okay dope cuz i have an ion and i see nothing wrong wit it i luv it thank you for comforting me
46carnage 10 months ago
@46carnage lol yeah
LovinDatPaintball 10 months ago
save a rock and throw an ion
58lancers 11 months ago
38:52 his barrel looks bent!! hahaha
B3nj0m4n 11 months ago
i wanna get to the ASA installation. can anyone give me a time for that?
dont rlly feel like scanning throught 42 mins of other stuff i dont need...
ja735 11 months ago
what to upgrade on dp g3? im trying to make it as good as possible. its stock right now but i got like 200 bucks to upgrade, i dont wanna buy a board though
stonedhappykid 11 months ago
@stonedhappykid get the techt bolt engine and maybe a custom products regulator
brettline07 10 months ago
Mike, please help me. I have a regular Ion and i didnt know about the feedneck issue. I sanded down my Halo B Victory 35 to fit the stock one, realized it wouldnt feed so i just bought a new locking feed neck... will the new feed neck still work with a sanded hopper feed neck?
LovinDatPaintball 11 months ago
@LovinDatPaintball im not mike but you can ajust to your liking if you sanded it down alot you might need tape lol
islorenzo 11 months ago
@islorenzo i just got my clamping feed neck today and it OWNS! my halo and rotor can fit in it!! and its super low rise!
LovinDatPaintball 11 months ago
@LovinDatPaintball good to hear
islorenzo 10 months ago
@LovinDatPaintball im not mike but you can ajust clamping feednecks to your liking if you sanded it down alot you might need tape lol
islorenzo 11 months ago
ur so tall dude
zZ1daniel1Zz 11 months ago
lolol yeah, uh huh, you know what it is... Black and Yellow, Black and Yellow!
SnipingJonZe 11 months ago 11