I had the first generation 2950... back in 94 and I loved it. I could go anywhere on the band. I recently got another one waiting on it to come in the mail.
ive always been a fan of the RCI radios as well as the HR 2510s. easy to work on and you can mod them as well. The new 2950s are all SMT and hard for a guy like me with poor eyesight to work on.
Yes the RCI is a wonderful radio, especially the early one's. The later ones' were a little harder to Mod, you needed a board from ranger. The early one's it was simply move a shunt pin. Great rig to use barefoot and with an amp, as you can control the power output from the front panel as it has both a mic gain and RF power output knob on the front panel.
well, technically the FCC dosent want you to do that, but if can be done. theres jumpers on the back of the front board. you can google which one it is. conversion cant be messed up.
I see you have a KL203 Amplifier? How do you like? I have always used a modded CB's but my newest one is coming with a switch in the dead key power so I can use it barefoot or with an amp. Is the KL203 a good amp for a starter. It will be used with a Cobra 29 'Stealth Modified' done by Sparky's CB Shack
I had the first generation 2950... back in 94 and I loved it. I could go anywhere on the band. I recently got another one waiting on it to come in the mail.
savage308win 6 months ago
Hahaha and he's only running 2/3 of his max power. you can hear him saying he only on stage 2 out of 3.
nurfacebish 6 months ago
Well when you're pushing like 5,000 watts like the cat who came booming in, it sure helps.
nurfacebish 6 months ago
Whats the max power these 2950s push out? are they running on a single or dual output transistor
kevinturvy 7 months ago
ive always been a fan of the RCI radios as well as the HR 2510s. easy to work on and you can mod them as well. The new 2950s are all SMT and hard for a guy like me with poor eyesight to work on.
TheZeke1974 1 year ago
Yes the RCI is a wonderful radio, especially the early one's. The later ones' were a little harder to Mod, you needed a board from ranger. The early one's it was simply move a shunt pin. Great rig to use barefoot and with an amp, as you can control the power output from the front panel as it has both a mic gain and RF power output knob on the front panel.
mrRhwalden 1 year ago
hahahh i have the same radio with the same 11 meter setup too
961995h 1 year ago
Ranger RCI 2950
Back in the 90`s it was a
Sommerkamp TS 2000 DX
MrDigic4 1 year ago
dont run this setup anymore, i now run a general lee.
the amp in this video is an RM italy KL-203, and with the right radio driving it you can see about 125 watts PEP, which isent bad for the price paid..
neubie182 1 year ago
What kind of amp is that and what kind of power do you get out of it?
FelixTheHouseFreak 1 year ago
can this radio pick up cb channels.
a trucker i knew had one but sold it before i could buy and he had one that looked like this
JayShawn89 2 years ago
skip is the coolest thing man, i'm in upstate new york " 675 " "thumper" channel 28. i have a small set up and talked skip to nebraska
goatskindreams 2 years ago
i love it when the skip rolls in, i talk all over. im in michigan and iv talked to california and alaska.
i now run a general lee on my base with an astatic 636 mic, and it works great.
neubie182 2 years ago
i just picked up a older d-104 and a president d base. can't wait to try it out
goatskindreams 2 years ago
I've got the same radio and a RM KL 500 4 pill. See ya out there in DX land soon hopefully.
ZZZTESTZZZ 2 years ago
I got a old version of the KL203, just wondering, does yours click when you key up?
BurningTirez 3 years ago
yes, every amp clicks when you key up.
its the relay.
neubie182 3 years ago
Nice Radio And mic Astatic
sm4wit 3 years ago
nice radio what mhz range has it got
Afamousperson 3 years ago
its got 26-32 MHz after conversion.
converting it is also REALY easy too..
neubie182 3 years ago
how do you convert rci 2950 to 26-32
i want to get one but they wont convert it to go toCB channels
abseconPC 2 years ago
well, technically the FCC dosent want you to do that, but if can be done. theres jumpers on the back of the front board. you can google which one it is. conversion cant be messed up.
neubie182 2 years ago
what type of conversion
JayShawn89 2 years ago
whats a 4 and 1 ?
thefisherman001 3 years ago
Five.
Pugragger 2 years ago
How many amp is your power supply for the Ranger?
siriusdish 3 years ago
had a 36 on that one. :D
neubie182 3 years ago
I see you have a KL203 Amplifier? How do you like? I have always used a modded CB's but my newest one is coming with a switch in the dead key power so I can use it barefoot or with an amp. Is the KL203 a good amp for a starter. It will be used with a Cobra 29 'Stealth Modified' done by Sparky's CB Shack
robm425 3 years ago
weres the skip or do ya class local next town to you as skip?
m3xlipat 3 years ago
that is fucking skip. hah
neubie182 3 years ago
what like skippy the kangeroo
m3xlipat 3 years ago
iv never heard that guy local.
infact thats the only time iv ever heard him. its skip, t does come in that strong all summer here. i live on top of a hill here in michigan.
neubie182 2 years ago
great modulator amp for the price.
cant beat it.
tip, put 2 1/2 to 3 watts drive. nothing more.
neubie182 3 years ago
i love that radio
control2950 3 years ago
esta bastante bien la verdad
ajjandresalvarez 4 years ago