@Xarmy187 I want to get a foxbody mustang do you think it would be best to get one that would need work so where I could fix it up. or but one already running? Im open for any suggestions!
@TheTerrancejayy if your not good with tools and have no prior experience with these car's, I would find one in decent condition that is running. You can find them quite cheap if you keep an eye out.
@Xarmy187 My uncle is an mechanic and his skills are much better with older cars then new. he has more experience working with muscle cars than anything so i figure he can help me out since this will be my first car that I can work on with him for about 1 year so i can be driving my jr year in high school. But i've been looking most of them that were running were around 2500 some that needed alot of work for around 1200-1600
@Xarmy187 Another thing i was wondering. I was told a car as old as an 89 would have to go to a test only smog. And if you have a cam in the car it wouldn't be street legal. does the same laws apply in Colorado as in California
@TheTerrancejayy no, california is MUCH more strict. They have no real way to prove you have a cam, they can't pull the engine apart just to check
as long as it run's good with the cam, you will be fine, but check your local laws. California sucks because they are so strict as far as modifying your car.
@TheTerrancejayy I just got my 85 5.0 ho it's pretty fast considering its completely stock it has ac and power everything I just wish I would of did a little more research on the technical stuff because an 86 has all the stuff I want stock so I have to convert some things just to be comparable
@Xarmy187 okay!! cant wait! and im about to get a 1986 mustang with a 302 .40 over flat top pistons 1.7 roller rockers cam shorty headers edelbrock intake and carb! and a built aod which im planning to swap for a 5 speed! i got a video of it posted you should check it out!
5.0 block will split between 12-14lbs of boost... 550 at the rear tires is about 660 a the flywheel. it will go boom around 480-520hp at the flywheel. Done it on datalogged, properly tuned 5.0s, start saving for a boss block
NIIIICE! Got my M112 sitting ready for intake kit from JDB. Will be nice to watch yours go on at the same time. Mines going on a 95 5.0. You getting the offset or top setup? Got a list of everything else to go with it too.. LIghtning MAF, 42lb inj, Moats HQ etc etc. Ill keep mine below 12lbs boost for awhile and keep the motor in one piece lol.
Use water Meth injection to cool the supercharger. Have you sold the used victor intake? if not and you are looking to sell it let me know what you would charge for the upper an lower intake.
what's up buddy this is JDMxGSRxVTEC i got a new account now, made sure i subscribed back to ya, you ever get that new exhaust setup? can't wait to see this beast on it tho man how long until you do this?
yo havent chated with you in a while but i think a saw your name on a list on Stinger Performance PIMP cpu lol.............guess your getting the better CPU too runn this bad boy on there huh??
@FUNNYman1808 if its a 5.0/302 this kit will fit it. But im pretty sure you would need a cowl hood even with his kit that is suppose to use stock hoods on foxbodys.
I was wondering if you could help me I though about getting a v6 Thunderbird but want more power so I wanted to no if you could help me with the install of a supercharger from an sc Thunderbird like what I need and etc... It would be really nice if you could thanks
@emokidsscare what help do you need? They have supercharged v6 thunderbird from the factory, so im sure you could just buy all the OEM stuff and it would work great.
@Xarmy187its an all stock v6 but I'm going to buy the supercharger from the Thunderbird but I was wanting help with on what i need to take off and fit and put on but I think the supercharger but if you make one about putting it on that might help
Oh man I don't even have a stang "yet" but I might have to buy a blower like that just to be able to say "my blower is bigger then your engine" to the import guys
hell yeah man that thing all ready bad now cant wait to see how crazy bad its going to be when you put that blower on! i whent and put that dizzy in the stang an got it timed right and that thing loaps like hell sounds real good to took it for a ride from a dead stop with out popin the cluch burn em in 1st 2nd and a some of 3rd pulls fucking hard to ill have videos soon . you listin to gravewarm?
It is the only channel on youtube that you can really see the evolution of a mustang, thumbs up for you. I love your channel and your mustang! take care!
@MrStangerbanger haha, Well I do have bigger then average hands, big boy. *wink wink*
Still waiting on the adapter bit, but after that I can get busy. hardest part will be fabricating a custom bit to brace the snout of the blower, and a idler pulley to keep the belt tight if I need one.
@Xarmy187 Well when you drive a Hyundai you learn to deal with dissapointment on a daily basis... Looking forward to the build up videos man, been following your Stang for a while, you think the bottom end is gonna hold up?
@rangerfx42002 It's a kit that's basically an adapter for the lower intake. So the blower replaces the upper intake, and then there is an adapter that lets us use our foxbody throttle bodys
@Xarmy187 nice... how much did the kit run you and who makes it. I have an 87 gt t top i have a couple videos of it on my channel, thinkin about rebuildin the bottom end specifically for this
@Xarmy187 I want to get a foxbody mustang do you think it would be best to get one that would need work so where I could fix it up. or but one already running? Im open for any suggestions!
TheTerrancejayy 2 weeks ago in playlist Uploaded videos
@TheTerrancejayy if your not good with tools and have no prior experience with these car's, I would find one in decent condition that is running. You can find them quite cheap if you keep an eye out.
Xarmy187 2 weeks ago
@Xarmy187 My uncle is an mechanic and his skills are much better with older cars then new. he has more experience working with muscle cars than anything so i figure he can help me out since this will be my first car that I can work on with him for about 1 year so i can be driving my jr year in high school. But i've been looking most of them that were running were around 2500 some that needed alot of work for around 1200-1600
TheTerrancejayy 2 weeks ago
@TheTerrancejayy I would keep your eye out for a few months...... you would be surprised what people will sell when they need the money.
Xarmy187 2 weeks ago
@Xarmy187 Another thing i was wondering. I was told a car as old as an 89 would have to go to a test only smog. And if you have a cam in the car it wouldn't be street legal. does the same laws apply in Colorado as in California
TheTerrancejayy 2 weeks ago
@TheTerrancejayy no, california is MUCH more strict. They have no real way to prove you have a cam, they can't pull the engine apart just to check
as long as it run's good with the cam, you will be fine, but check your local laws. California sucks because they are so strict as far as modifying your car.
Xarmy187 2 weeks ago
@TheTerrancejayy I just got my 85 5.0 ho it's pretty fast considering its completely stock it has ac and power everything I just wish I would of did a little more research on the technical stuff because an 86 has all the stuff I want stock so I have to convert some things just to be comparable
jdjas 6 days ago
the car is already fast enough!! with this blower its going to be awesome! please post videos soon!
tmaxxracer12 4 weeks ago in playlist Uploaded videos
@tmaxxracer12 i will asap...... still waiting on the adapter :(
Xarmy187 4 weeks ago
@Xarmy187 okay!! cant wait! and im about to get a 1986 mustang with a 302 .40 over flat top pistons 1.7 roller rockers cam shorty headers edelbrock intake and carb! and a built aod which im planning to swap for a 5 speed! i got a video of it posted you should check it out!
tmaxxracer12 3 weeks ago
@tmaxxracer12 k will do
Xarmy187 3 weeks ago
It's never awkward when I do it by myself... lololol 2.02
sheelys 1 month ago
Nice, cant wait to see the install of this bad boy!
02mp9696 2 months ago
5.0 block will split between 12-14lbs of boost... 550 at the rear tires is about 660 a the flywheel. it will go boom around 480-520hp at the flywheel. Done it on datalogged, properly tuned 5.0s, start saving for a boss block
rcrcman 2 months ago
NIIIICE! Got my M112 sitting ready for intake kit from JDB. Will be nice to watch yours go on at the same time. Mines going on a 95 5.0. You getting the offset or top setup? Got a list of everything else to go with it too.. LIghtning MAF, 42lb inj, Moats HQ etc etc. Ill keep mine below 12lbs boost for awhile and keep the motor in one piece lol.
rcrcman 2 months ago
Use water Meth injection to cool the supercharger. Have you sold the used victor intake? if not and you are looking to sell it let me know what you would charge for the upper an lower intake.
brimmer555 2 months ago
what's up buddy this is JDMxGSRxVTEC i got a new account now, made sure i subscribed back to ya, you ever get that new exhaust setup? can't wait to see this beast on it tho man how long until you do this?
lhungryhappysleepy 2 months ago
@lhungryhappysleepy I will be putting the offroad exhaust back on it as soon as I install a bung for the wideband if thats what you mean.
Thanks for coming back to follow me ! Shouldn't be much longer then a month, still waiting on a few parts
Xarmy187 2 months ago
@Xarmy187 finally a cure for your high elevation
MIGHTYSAMINYOURFACE 2 months ago
@MIGHTYSAMINYOURFACE thats the plan!
Xarmy187 2 months ago
@Xarmy187 you whore!!!!! am loooking for an M112 for my 90 5.slowww cant wait to see how the build goes imma need guide lines for mine haha
steprep1122 1 month ago
@steprep1122 haha, get a hold of joey for the kit. I will be making plenty of videos as I install it.
Xarmy187 1 month ago
yo havent chated with you in a while but i think a saw your name on a list on Stinger Performance PIMP cpu lol.............guess your getting the better CPU too runn this bad boy on there huh??
bbsombs 2 months ago
@bbsombs not sure what list or cpu your talking about? I got a anderson PMS that im going to use to tune the car. otherwise how is it goin'?
Xarmy187 2 months ago
Ok i have a thunderbird with a 5.0 so can i buy a supercharger for it or do i have to do some surching?
FUNNYman1808 2 months ago
@FUNNYman1808 if its a 5.0/302 this kit will fit it. But im pretty sure you would need a cowl hood even with his kit that is suppose to use stock hoods on foxbodys.
but with a cowl hood, this kit will fit.
Xarmy187 2 months ago
@Xarmy187 `Yes it is a 302. And ok thanks i will be looking for this kit.. Hope to see it on there
FUNNYman1808 2 months ago
I was wondering if you could help me I though about getting a v6 Thunderbird but want more power so I wanted to no if you could help me with the install of a supercharger from an sc Thunderbird like what I need and etc... It would be really nice if you could thanks
emokidsscare 2 months ago
@emokidsscare what help do you need? They have supercharged v6 thunderbird from the factory, so im sure you could just buy all the OEM stuff and it would work great.
Xarmy187 2 months ago
@Xarmy187its an all stock v6 but I'm going to buy the supercharger from the Thunderbird but I was wanting help with on what i need to take off and fit and put on but I think the supercharger but if you make one about putting it on that might help
emokidsscare 2 months ago
will it fit under the hood or you going to cut a hole in it
mason3571000 2 months ago
@mason3571000 it should fit under my hood just fine. but I have a 3.5" cowl hood.
Xarmy187 2 months ago
I thought u was puttin a vortech in it
joshmarauder 2 months ago
@joshmarauder this was much much cheaper. If this doesn't work out I will be going with vortech
Xarmy187 2 months ago
@joshmarauder this was much much cheaper. If this doesn't work out I will be going with vortech
Xarmy187 2 months ago
WHATTT!!!!! GOOD SHIT MAN i cant wait to see u going up the street sideways not saying that you cant already ahah
saleenxxx 2 months ago
@saleenxxx there will be a ton of videos of me coming at the camera to hear that whine, haha
Xarmy187 2 months ago
Awesome!Early self christmas gift? Funny you always pick yourself out the perfect gift for yourself.
superslo5oh 2 months ago
It takes 60hp to turn at full throttle, not near that when not under boost. Can't wait to see up and going. ;)
jbraswell1987 2 months ago
This has been flagged as spam show
It's not even my car and I'm excited for it to be finished.
speed2speedy 2 months ago
Comment removed
speed2speedy 2 months ago
Cant wait to see it in action.
Broskivx 2 months ago
nice cant wait to hear it running wit that blower on it
Mikeyssss 2 months ago
SAY HELLO TO MY LITTLE FRIEND....!
305Stangs 2 months ago
Oh man I don't even have a stang "yet" but I might have to buy a blower like that just to be able to say "my blower is bigger then your engine" to the import guys
DIMEBAGJIMMY426 2 months ago
hell yeah man that thing all ready bad now cant wait to see how crazy bad its going to be when you put that blower on! i whent and put that dizzy in the stang an got it timed right and that thing loaps like hell sounds real good to took it for a ride from a dead stop with out popin the cluch burn em in 1st 2nd and a some of 3rd pulls fucking hard to ill have videos soon . you listin to gravewarm?
foxbodystang100 2 months ago
Not a twin screw, but this beats a whistling blower haha. Nice nice!
Nt0759 2 months ago
Can't wait to see what #s your making with it! You got it cammed for a blower or no?
need2speed94 2 months ago
It is the only channel on youtube that you can really see the evolution of a mustang, thumbs up for you. I love your channel and your mustang! take care!
MrFreddy1201 2 months ago
Looking foward to the install. Was it hard to do ac delete on your car?
GarageCrazy 2 months ago
Nice rob, went ported and pulled eh ? Careful. I'm betting your bottom end will scream for mercy.
GhostRider351 2 months ago
Good luck on the build friend, she looks sweet.
jettagt97tt 2 months ago
awesome video man!! whats your bottom end look like on the motor?
FordsRule351 2 months ago
@FordsRule351 Its a rebuilt explorer bottom end, with the piston rings gapped for nitrous, so they will do good with this blower.
Xarmy187 2 months ago
How much for your old mass air ? I have a 04 cobra mass air brand new but was told it maxes out at 450 rwhp
MrStangerbanger 2 months ago
"I have pretty big hands" lol lol
Look sweeeeeet can wait to see this shit bro ... I'm almost finished with mine i got the oil feed and return lines done so almost there ..
MrStangerbanger 2 months ago
@MrStangerbanger haha, Well I do have bigger then average hands, big boy. *wink wink*
Still waiting on the adapter bit, but after that I can get busy. hardest part will be fabricating a custom bit to brace the snout of the blower, and a idler pulley to keep the belt tight if I need one.
Xarmy187 2 months ago
The blower is bigger than my engine, now I just feel insecure....
AyeItsMike 2 months ago
@AyeItsMike lol, 112 cubic inch's, 1.8L. Its bigger then a lot of 4 banger motors.
Xarmy187 2 months ago 3
@Xarmy187 Well when you drive a Hyundai you learn to deal with dissapointment on a daily basis... Looking forward to the build up videos man, been following your Stang for a while, you think the bottom end is gonna hold up?
AyeItsMike 2 months ago
how the hell are you going to make that work??..its not gonna fit the motor from what i see
rangerfx42002 2 months ago
@rangerfx42002 thype this "Eaton M112 Cobra Supercharger on 5.0 Mustang" check out this vid my jaw dropped when i first saw this.
futurepornstar100 2 months ago
@rangerfx42002 "shelby gt500 blower on fox" ...also this vid check it out.
futurepornstar100 2 months ago
@rangerfx42002 It's a kit that's basically an adapter for the lower intake. So the blower replaces the upper intake, and then there is an adapter that lets us use our foxbody throttle bodys
Xarmy187 2 months ago
yooo... let me get that.
Zsumms21 2 months ago
@Zsumms21 nah, bro, nah.
Xarmy187 2 months ago
how long do you think the lower end of the motor will last?
rfirm34 2 months ago
@rfirm34 hopefully long enough to run 10's
Xarmy187 2 months ago
@Xarmy187 nice... how much did the kit run you and who makes it. I have an 87 gt t top i have a couple videos of it on my channel, thinkin about rebuildin the bottom end specifically for this
rfirm34 2 months ago
my dad had a 93 gt all done up, and he decided to put a supercharger on it.....That's the reason he sold it
brendanw122 2 months ago
@brendanw122 lol what?
Xarmy187 2 months ago
looks good man
TheMustangStampede 2 months ago
Is that a kenne bell. Should haul ass look forward to seeing the progress
rangerfx42002 2 months ago
@rangerfx42002 It looks like SVT it is def not a Kenne Bell
TheMustangStampede 2 months ago
@TheMustangStampede just relized that lol
rangerfx42002 2 months ago
@rangerfx42002 No, problem man.
TheMustangStampede 2 months ago
@rangerfx42002 It's a M112 from a 2003-2004 SVT Cobra.
Xarmy187 2 months ago
LOVE IT
hanratty450 2 months ago
want
derek94gt 2 months ago
@derek94gt lol, awesome first comment. I lul'ed for reels
Xarmy187 2 months ago