I'm actually looking for a vid on how to remove the black retaining strip.. but u started the vid without it already -.- .. please tell me how u did it...
@ibusturballs Thank's I'll do it tomorrow.. btw, how much fps can it handle without changing any internal parts except the spring... I would like to upgrade it.. mine shoots 390-400 right now... I'd like to make it over 450.. also, did u change ur hop-up coz is it plastic... thank you...
@killerferret411 I dont think the bolt needs to be taken off but u may have to pry it off after removing the clip. I don't have my bolt anymore it was rubbing on my cylinder and i couldn't get it to work properly so i snapped it off
Ok, you're right. The bolt doesn't need to be taken off, but how would you suggest I smack the retaining strip off. I just line up a flathead screwdriver and smack the screwdriver handle with a hammer and it does basically nothing at all.
@killerferret411 there should be a notch near the back/ end of the strip you have to put a flat head in the notch and smack really hard it will eventually start moving
I've worked on quite a few airsoft guns, this was the only one that stumped me, thanks for the vid!
Chris0Barry4 5 months ago
to do it by myself is no problem but my question was do the standard cylinder( with no hole in it) fit in there?? thank you
Kastaprav 1 year ago
Can you remove the cylinder to the normale one? to use it without blow back
Kastaprav 1 year ago
@Kastaprav ASGI will modify a cylinder for you or you can modify one your self. you should be able to google it or call up ASGI
ibusturballs 1 year ago
This has been flagged as spam show
@ibusturballs to do it by myself is no problem but my question was do the standard cylinder( with no hole in it) fit in there?? thank you
Kastaprav 1 year ago
Can you remove the cylinder to the normale one?
Kastaprav 1 year ago
I'm actually looking for a vid on how to remove the black retaining strip.. but u started the vid without it already -.- .. please tell me how u did it...
MrMykee18 1 year ago
@MrMykee18 smack the crap out of it with a hammer and a flat head screw driver to push it off it is on very tight
ibusturballs 1 year ago
@ibusturballs Thank's I'll do it tomorrow.. btw, how much fps can it handle without changing any internal parts except the spring... I would like to upgrade it.. mine shoots 390-400 right now... I'd like to make it over 450.. also, did u change ur hop-up coz is it plastic... thank you...
MrMykee18 1 year ago
@MrMykee18 i have no idea the front of my box cracked with the stock spring. I replaced my hop up with a G&P one
ibusturballs 1 year ago
@ibusturballs holy shit mine two the exact same thing lol
Renegadeairsoft 1 year ago
one handed. nice.
achrispierce 1 year ago
So this is obviously after the fake bolt is taken off....
Do you just remove the small E-Clip and pry the bolt off of both sides of the gearbox shell?
killerferret411 1 year ago
@killerferret411 I dont think the bolt needs to be taken off but u may have to pry it off after removing the clip. I don't have my bolt anymore it was rubbing on my cylinder and i couldn't get it to work properly so i snapped it off
ibusturballs 1 year ago
Ok, you're right. The bolt doesn't need to be taken off, but how would you suggest I smack the retaining strip off. I just line up a flathead screwdriver and smack the screwdriver handle with a hammer and it does basically nothing at all.
killerferret411 1 year ago
@killerferret411 there should be a notch near the back/ end of the strip you have to put a flat head in the notch and smack really hard it will eventually start moving
ibusturballs 1 year ago
smack the SH$T out of it it will eventually come off
ibusturballs 2 years ago
how do you remove the black retaining strip? it is quite hard to remove on mine.
zaidopinoy 2 years ago