I've used alot of eastwood products over the years. This just looks like shit. If you need to do this to your car... You have to big of wheels and tires. Don't put oversized wheels and tires on your car it looks stupid.
Why would you do this? All you're doing is denting the fender edge and putting dings all along side the arch! Lame ass with zero know-how.. You must be blind and stupid!
So.......... I should throw out my PC and pick up a ROCK! what's next? 'Remove rubber from wheel for faster lap times!' An idiot product made by an idiot!!!
What a hack , I would fire anyone in my shop stupid enough to use this tool on a fender. you could roll the fender with a piece of pipe and get a better result and no damage , just do it on a hot day after the car has heated up .
ok could you please help me out understand if I would need to get certed after the fenders get cut? Am wanting these widebody flares (3" wide) molded to the car but the rims guys were like it would be real hard to find rims/tires that won't touch the fender plus they might cost a fortune too.. so do you think if I get the fenders rolled it would help without me having to cut the fender maybe? Need your honest expertise on what I should do.. its for a 2003 audi a4 that an thnking of doing.
@elvisvwvw If you were to roll fenders (that have decent paint on them already), would you be be ok adding a coat of clear? Or do you reckon you'd have to repaint the whole things? I'm not really considering rolling fenders anytime soon but just thought I'd ask for future reference. :)
the guy is correct to say it's 180 degrees. look at a protractor. you will notice it starts at 0 on one end and 180 on the other. moving from the horizontal plane upwards would go towards 90 degrees or a right angle. after that it continues to 180 or basically a flattened U which is what the device does. Going from 0 to 90 then 90 back to 0 would make it flat.
Wow old man, you done fucked up! Fender roller FTW, not this garbage.
4G63PWR 1 week ago
Title should say: How to ruin the fenders on your S4
Bjlee2000 1 week ago
you can also tint your windows with this handy tool, just give each one a nice hard tap.
11thhourreprieve 2 weeks ago
nooooooooooooooo
grocer3 2 weeks ago
obviously he was swinging the bat instead of using it properly if he thinks this POS is better
steve76384 2 weeks ago
i would rather buy a fender roller that attaches to the hub
BellsAnThings 3 weeks ago
this old fart thought it helped..
SPIDER 2 months ago
this nigga crazy..
osorry86 3 months ago
its cheaper to buy an arch roller and do a good job than use your modified pliers !!
aldj1983 3 months ago
HOPE YOU GET AIDS! NOBODY THREATS AN OLD S4 LIKE THAT!
DJzSith 3 months ago
notice the tone of his voice went from calm to desperate after he realize he fucked that fender up
getindavanlilboy2 3 months ago 2
Or you could use a mallet. That way you're not damaging the outer fender or paint with "crimps". Plus it's cheaper
TheFancytastic 4 months ago
you fucked the fender
dpg679 4 months ago
FUCK THAT!!
jggraphx 5 months ago
I've used alot of eastwood products over the years. This just looks like shit. If you need to do this to your car... You have to big of wheels and tires. Don't put oversized wheels and tires on your car it looks stupid.
zeppelin67637 6 months ago
Product seems legit to me. Bet it works better than a bat, or a hammer. Also, looks way cheaper than the normal fender roller.
pin0ywhat 8 months ago
FENDER FINISHED THATS ABOUT RIGHT SHITT
THEPITBOY2011 8 months ago
Why would you do this? All you're doing is denting the fender edge and putting dings all along side the arch! Lame ass with zero know-how.. You must be blind and stupid!
rcpro17 9 months ago
Look how he fucked up that fender! Just cut the lip off.
lovthaigurlz 9 months ago
I like how he had to make a digital blue print
its just a huge pair of pliers with rubber ends
jictcaliber 9 months ago
So.......... I should throw out my PC and pick up a ROCK! what's next? 'Remove rubber from wheel for faster lap times!' An idiot product made by an idiot!!!
mercv81 10 months ago 2
i bet he waisted half his life making that, once a chid wanting roled arches, now an oap with a shit tool.
aidan21 10 months ago
What a hack , I would fire anyone in my shop stupid enough to use this tool on a fender. you could roll the fender with a piece of pipe and get a better result and no damage , just do it on a hot day after the car has heated up .
cpitarre 10 months ago 2
lmfao
Turkish42 11 months ago
fail product!
ekzerfloe 11 months ago
ok could you please help me out understand if I would need to get certed after the fenders get cut? Am wanting these widebody flares (3" wide) molded to the car but the rims guys were like it would be real hard to find rims/tires that won't touch the fender plus they might cost a fortune too.. so do you think if I get the fenders rolled it would help without me having to cut the fender maybe? Need your honest expertise on what I should do.. its for a 2003 audi a4 that an thnking of doing.
rags17 1 year ago
@elvisvwvw If you were to roll fenders (that have decent paint on them already), would you be be ok adding a coat of clear? Or do you reckon you'd have to repaint the whole things? I'm not really considering rolling fenders anytime soon but just thought I'd ask for future reference. :)
jcadlols 1 year ago
NOT THE S4!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
AHNAYAL8R 1 year ago
Poor S4....dam!
Pendemic 1 year ago
where can i get that tools at
WearMyBoxers 1 year ago
omfg! what did u do to that fender >.<!
kailuaboy01 1 year ago 26
jeeezuz thats a good way to add a load of ripples to the fender. this tool is garbage
might as well use plyers..
specialformula14 1 year ago 55
@specialformula14 maybe if you do not know how to use it... its not hard to smash flat ripple spots...
Tj1056 1 month ago
@Tj1056 the roller is all ya need.. look at the dislikes and thmbs dwn.. this thing causes u more work in repair
specialformula14 1 month ago
In this clip you learn how to ruin your audi s4.
8giang8 1 year ago 3
garbage
stealthassassin420 1 year ago 2
yeah....he puts a dent in the fender......
kevnhi 1 year ago 2
the guy is correct to say it's 180 degrees. look at a protractor. you will notice it starts at 0 on one end and 180 on the other. moving from the horizontal plane upwards would go towards 90 degrees or a right angle. after that it continues to 180 or basically a flattened U which is what the device does. Going from 0 to 90 then 90 back to 0 would make it flat.
idiotgear 1 year ago
you bent it idiot!
Peregar4ik 1 year ago
@Peregar4ik lol do you know what fender rolling is?
ILikeReallyBigButts 1 year ago
Hey they invented a pig set of pliers that makes your fender all wavy! GENIUS!
killersushi99 1 year ago 2
lol 180 degrees would mean the fender lip would be sticking outside of the fender wall XD
tabletop45 1 year ago
nice tool! but your going from 90 to 0. 180 is a straight line.
manathegreat 2 years ago
I was thinking the same!
Diffwrecker 2 years ago