el chiste de subir este tipo de vídeos es poner como se hizo ese es el caso mejor no subas nada...youtube,tu me ayudas, yo te ayudo,todos nos ayudamos...inteligencia colectiva...!!!
anywhere I could get the kit premade? While I love working with electromincs I dont have the time to put togeter one that has over 650 components.... but I do love it!
Have u consider an alternative solution instead of buying other peoples circuit and "remake" it? You should consider to use a Frequency to Voltage converter IC and then plug the output to a MCU's ADC or external ADC IC if u want higher resolution. FPGA should work too but I prefer MCU. Try to map a range of freq (typically 20 to 20k Hz for audio signal) and then once u know the corresponding voltage range produced by the converter u can have LEDs -> MUX and then use Logical combination from MCU
i've been trying to find the name of this song for years! THANK YOU!!! Its one of those "ah i heard that a few years ago and it was awesome but i have no idea what its called"
Hi, my dad wants me to build one for him. I don't have problems with microcontrollers, filters and other you need to build it, but i see this analyzer has 16 central frequencies.
Now one octave step analyzers have 10 bands, while 1/2 octave ones have 20 bands. I don't know much about music so i don't know how to choose the frequencies for the filters. What frequencies are you using?
Can someone on this blog that has built one of these contact me and assist me in building one of these with a twist, I want to use LED Strips instead. Gavincurtis said you can use strips but somethings have to be changed to make it work. I am a quick learner and would love to build one of these.
I ran out of parts but did relist the kit on ebay once they have been restocked. Try "VU meter kit" on ebay search field. It has been there for a couple of weeks now. :)
I got excited at first when I saw the calipers in another video of yours because I know someone who would like an electrical interface to a pair of digital calipers. Very creative implementation of touch interfaces!
:) The control board kit is $165.00 and you build your own LED array. Ebay 'audio spectrum analyzer kit'. Also have the blank 7 inch LED array boards as in this video (you stuff it with your own LEDs) for around $35.00.
Have a smaller profile display approx 2.3" x 7" for rack mount equiment available in about 2 weeks (hopefully). Probably more ideal for audiophile applications. Uses the exact same controller board. Red, green and blue bargraph LED arrays have been sourced... much less expensive than discrete LEDs.
Control board with 2.3" X 7.0" display will be under $240.00 without any enclosure.
Very cool! My service van would love to have that implanted into it's console! Just think of what it would look like in my roving videos!
rovingrepairbot 4 months ago
Hello pal do you still have this kit for sale or is it possible for you to send me the schematics? Thanks and keep up the good work!
himax84 5 months ago
interested in putting this in a customed car for show do you have any for sale and for how much?
lexusscmoose 5 months ago
hey do you have any right now for sale
nbkbx4m 7 months ago
el chiste de subir este tipo de vídeos es poner como se hizo ese es el caso mejor no subas nada...youtube,tu me ayudas, yo te ayudo,todos nos ayudamos...inteligencia colectiva...!!!
KINGSoftheSOURCE 7 months ago
can you please send me a link to buy a kit or instructions on how to make it. jasoncase@live.com
Thank you!
jasoncasemusic 8 months ago
song is dub in life by eifel 65
mrcuscuscus 8 months ago
What's the name of this song so I can test some of the parameters of this product
bessljo 10 months ago
Its an FFT Analizer or only multiplexed filter?
racerxdl 1 year ago
where can I buy one??? speedman007911@yahoo.com
007911speedman 1 year ago
This has been flagged as spam show
Where can i get a kit?
ianb19931 1 year ago
Where can i get a kit?
ianb19931 1 year ago
This is cool were can i get on i have always wanted to build one.
ilmo490 1 year ago
no link!
shyboy2cute 1 year ago
anywhere I could get the kit premade? While I love working with electromincs I dont have the time to put togeter one that has over 650 components.... but I do love it!
DJelectfire 1 year ago
where can i buy this kit?
dra90n8 1 year ago
song name please?
BTW:Great Job!
MrSomeone4321 1 year ago
@MrSomeone4321 probably kinda late but it's dub in life by eiffel 65 :) the guys who made I'm Blue
ecam90 1 year ago
@ecam90 hehe i know,but thanks very much!
MrSomeone4321 1 year ago
This is amazing!!!
redepoch76 1 year ago
you have the arrangement?
thiago112009 1 year ago
very good cool indeed! you have the arrangement because I wanted to ride one too if it is to pass me?
thiago112009 1 year ago
where can ai buy one it´s really cooll great job
razielmitzu 1 year ago
egy nagyon jo
fseby 2 years ago
That key on table is your "ground" ?
gabyrecords 2 years ago
@gabyrecords
It detects body proximity to change the display screen view.
gavincurtis 2 years ago 3
@gavincurtis - Under what on eBay ? Cannot find it ... jjdup@worldonline.co.za
jjdupz 1 year ago
@jjdupz Kits are currently sold out. In the process of making more. Keep an eye out late March/April on ebay when they are available again.
Sorry, making kits is a lot of work.
gavincurtis 1 year ago
i want one =) how can i make one?
sonicxlc123 2 years ago
I made a PIC do this.
gavincurtis 2 years ago
Hello,
i have some questions for you:
i have to make a little project in school and i was thinking of making a spectrum and i found yours here and maybe i could remake it.
so my questions are:
how much did it cost in totall and do you have still have some plans of it ???
plze react :)
Greetings
blackmambe 2 years ago
@blackmambe
try google, i hope it helps
P.S: Send me a vid when ur done :D
treanyo 2 years ago
ok :P i'll make a video if its done :D:P
blackmambe 2 years ago
Have u consider an alternative solution instead of buying other peoples circuit and "remake" it? You should consider to use a Frequency to Voltage converter IC and then plug the output to a MCU's ADC or external ADC IC if u want higher resolution. FPGA should work too but I prefer MCU. Try to map a range of freq (typically 20 to 20k Hz for audio signal) and then once u know the corresponding voltage range produced by the converter u can have LEDs -> MUX and then use Logical combination from MCU
SniperPIKACHU 2 years ago
@SniperPIKACHU
How can a FPGA do this?
gavincurtis 2 years ago
@SniperPIKACHU
Only one PIC MCU at 8 bit resolution with 4 MHz ceramic oscillator. The A/D is flooded with information. ')
gavincurtis 2 years ago
@SniperPIKACHU
I designed this kit and sell it. It is a remake from my 1970-80's.
There is the FFT solution which is much more mathematically complex. Is that what you mean?
gavincurtis 1 year ago
@blackmambe
OP AMP bandpass filters.
gavincurtis 2 years ago
wtf
lobuono92 2 years ago
i've been trying to find the name of this song for years! THANK YOU!!! Its one of those "ah i heard that a few years ago and it was awesome but i have no idea what its called"
kjun13 2 years ago
Hi, my dad wants me to build one for him. I don't have problems with microcontrollers, filters and other you need to build it, but i see this analyzer has 16 central frequencies.
Now one octave step analyzers have 10 bands, while 1/2 octave ones have 20 bands. I don't know much about music so i don't know how to choose the frequencies for the filters. What frequencies are you using?
fuscus66 2 years ago
@fuscus66
Look at how you see and way you hear. This is a 1/2 and 1/3 octave analyzer.
Bass is most powerful.
gavincurtis 2 years ago
it's not on ebay anymore? is it?
i just checked, but can't find it.
could you let me know how i can get my hands on one of these? it's pretty awesome, and i really like to have one.
cheers.
MijnCreaties 2 years ago
Is this a kit that you can purchase? Can you link several of them in a series and only display one meter?
postlife 2 years ago
where can i get shematic of this audio spectrum?
grazvatwesi 2 years ago
I am very interested in how this works... any pointers, what microcontroller did you use? and how tough is the programming?
jrash006 2 years ago
Looks fantastic. Great job! I wish I had this on my wall or desktop.
fridrikur 2 years ago
amaizing o.o
LIfaer 2 years ago
muito show cara, tem o esquema dele ?
deef182 2 years ago
what song is this?
acme5050 2 years ago
DUB in life
gavincurtis 2 years ago
Can someone on this blog that has built one of these contact me and assist me in building one of these with a twist, I want to use LED Strips instead. Gavincurtis said you can use strips but somethings have to be changed to make it work. I am a quick learner and would love to build one of these.
dabailey0320 2 years ago
dabailey,
I get super-busy fixing car computer systems; but contact me directly. :D
gavincurtis 2 years ago
Hi where can i get this kit? cnt seem to find it on ebay
mickile 2 years ago
Excelente, como hiciste, que IC usaste?
IVANLUISLG 2 years ago
i dont think he sells them anymore... tried messaging him, googling, looking on ebay.. nothing
blackburn29293 2 years ago
I ran out of parts but did relist the kit on ebay once they have been restocked. Try "VU meter kit" on ebay search field. It has been there for a couple of weeks now. :)
gavincurtis 2 years ago
are you gonna post another soon? I looked, yet it was no longer there
AethanElectronics 2 years ago
how much did it cost??
vecc555 2 years ago
I cant find it on ebay either... Any suggestion..?
TwiztedIndian 2 years ago
do i need to have any program for that or what?
shaman111111 2 years ago
where can i buy it????? please answer me thank you :D
MIKEBOSS94 2 years ago
Ebay.
In the search field enter "VU meter kit". You should find it.
If not email me!
Thanks!
Gavin
gavincurtis 2 years ago
WERE CAN I BUY ONE OF THIS
CHIQUILIN922 3 years ago
Ran out of kits, but more circuit boards now. Try "VU Meter kit" on ebay.
Thanks for the compliment!
gavincurtis 2 years ago
THIS is DUB?
gavincurtis 3 years ago
Yeah it's pretty groovy, but it's not a VU meter!. It's a PPM meter. VU meters show an average output, which this doesn't.
addison1977 3 years ago
Very true. But this will isolate a peak saturating your amplifier when the VU can't! ;)
Gotta have one, or the other; best to have both. On top of all that is a good set of ear(s).
gavincurtis 3 years ago
Engineering Note 022709:
To self when spectrum analyzer indicates failure of amplifier:
NEVER compress audio to compensate; simply make the amplifier better.
gavincurtis 3 years ago
I can't find it on ebay :/
Iambryancom 3 years ago
Try 'VU meter kit'
gavincurtis 3 years ago
that's awsome lol u got link for your ebay for one?
MrTerru 3 years ago
awesome!
JGO749 3 years ago
can you send me a link or just the manual?
Joelius90 3 years ago
Can you say song name? I'll be very thankfull.
DoBisDigITal 3 years ago
its Eiffel 65
199crazy 3 years ago
The name of song....IS????...I like it.
cilibiugeorgelucian 3 years ago
Eiffel 65 - Dub in Life
SuccessJC 3 years ago
I got excited at first when I saw the calipers in another video of yours because I know someone who would like an electrical interface to a pair of digital calipers. Very creative implementation of touch interfaces!
Donaldo 3 years ago
Me too! I'd love one. Would you do one with "old" red LEDs to match my B&O equipment? Cash waiting :)
rayfenwick 3 years ago
:) The control board kit is $165.00 and you build your own LED array. Ebay 'audio spectrum analyzer kit'. Also have the blank 7 inch LED array boards as in this video (you stuff it with your own LEDs) for around $35.00.
gavincurtis 3 years ago
Hi rayfenwick,
Have a smaller profile display approx 2.3" x 7" for rack mount equiment available in about 2 weeks (hopefully). Probably more ideal for audiophile applications. Uses the exact same controller board. Red, green and blue bargraph LED arrays have been sourced... much less expensive than discrete LEDs.
Control board with 2.3" X 7.0" display will be under $240.00 without any enclosure.
gavincurtis 3 years ago
Yes! Its coming along very nicely! :-) When oh when can I give you my hard earned cash for one of these babies? hehe
cybertron2600 3 years ago