It is body shop type masking tape made by 3M. You can buy it at any body shop supply store. The blue painters tape sold at home improvement and hardware stores will work good too. Good luck with your project. BDP Staff
@zedog3380 Your video is quite impressive i recently bought a 2011 kia cerato and wanted a sunroof installed they charged me a shit load of bucks thanks to your video i can do it myself.
Dude what kind of saw did you use? I did one of these on my durango a few years back with a jig saw, it worked but I blew through a couple dozen blades easy.
ADVICE PLEASE. I have a cadillac cts, got in an accident and my sun roof is pretty much gone. Would it be better to have someone do it pro? or do it myself? if you have any knowledge on prices,please enlighten me.
Probably the nicest video here, I have two questions, right after applying the sealant part, doesn't the sunroof also have a built in gasket underneath? And you should a piece where we see these aluminum strips, don't they go in between the sunroof and the liner? Confused about where the plastic clips go. No video was shown, other than that, great video.
The strips go between the sunroof and roof panel. There is another gastket that supports the headliner and finishes of the installation. Sorry we did not include that part, we will in the next video.
Wow this helped out big time. I bought the same exact sunroof off ebay. I plan on doing this to my El Camino. What cutting tool did you use? Will a jig saw work?
how much do you guys charge for doing this.?
Drsk8te02 2 weeks ago
that seems like a lot of work lol
Chuckster1414 1 month ago
what's the name of this song?
1984wrx 2 months ago
"Eminence Front" by the Who
zedog3380 2 months ago
what's the name of this song?
1984wrx 2 months ago
This was a GREAT video!! It looks easy... but im sure its hard work!!
janietheresa 5 months ago
Great tip, thanks. BDP
zedog3380 6 months ago
I would scuff up the paint with scotchbrite pad and make sure it was clean before sealent.
gmcjetpilot 6 months ago
would i be able to cut out T-Tops in my trans am? or is that a bad idea. cuz i want T-Tops.
smitty6293 7 months ago
@smitty6293 if its a 93-02 the support is already there look on youtube under camaro t op conversion
notgoncry 6 months ago
@notgoncry its an 83
smitty6293 6 months ago
@smitty6293 then youll have to go to the junk yard and get the roof from a nother firebird and put it on then you can order the kit
notgoncry 6 months ago
I need the list of all tools used. Please
oznose 8 months ago
so were is the hard part of this installation >:( grrrrrrrrrrrrrrr
MarkMasters83 9 months ago
What if I have a convertible hard-top? Can this still be done and/or recommended?
xxWizDumbxx 10 months ago
It is body shop type masking tape made by 3M. You can buy it at any body shop supply store. The blue painters tape sold at home improvement and hardware stores will work good too. Good luck with your project. BDP Staff
zedog3380 11 months ago
@zedog3380 Your video is quite impressive i recently bought a 2011 kia cerato and wanted a sunroof installed they charged me a shit load of bucks thanks to your video i can do it myself.
geminirea 7 months ago
Hi, great video, what type of sticky tape did you use to avoid damaging the paint?
thanks
nipz2nv 11 months ago
Thanks for the vid.
sidewaysntraffic 1 year ago
Ok....Great! Glad you liked it. We're working on another more detailed install of an electric slide back model in a new Charger. Stay tuned. BDP.
zedog3380 1 year ago
Thumbs up if this video made u think about liquid electronic sex
chamblizi 1 year ago
Thanks for the comment. The word "Instructions" is spelled correctly at 3:20. The kit was purchased on the internet for a little over $100 USD.
Please note your comment is an incomplete sentence.
Thanks and keep watching BDP staff.
zedog3380 1 year ago
where did you buy this kit from and you spelled instructions wrong at 3:20
ImAscatman192 1 year ago
Dude what kind of saw did you use? I did one of these on my durango a few years back with a jig saw, it worked but I blew through a couple dozen blades easy.
bwaam 1 year ago
The kit used in this video was a little over $100 dollars US. Take your time, measure many times before cutting and you can do it. Good luck.
We are planning another video on sunroof installation. Look for it early next year. Thanks BDP
zedog3380 1 year ago
hey i got a 2002 pontiac bonneville n i was thinkin bout install a sunroof...how much the kit is and do you think i should do it my self
KGtv662 1 year ago
Sorry I'm not sure of the brand, it was purchased online for little money.
zedog3380 1 year ago
@zedog3380
safe is good.
THanks for the direction.
ilikemy777 1 year ago
What is the sunroof brand? And where can I buy it?
pittsbrader 1 year ago
ADVICE PLEASE. I have a cadillac cts, got in an accident and my sun roof is pretty much gone. Would it be better to have someone do it pro? or do it myself? if you have any knowledge on prices,please enlighten me.
ilikemy777 1 year ago
@ilikemy777
I recommend having a professional repair and service your
sunroof on your CTS. Thanks BDP
zedog3380 1 year ago
Be sure to check out my other video on repairing a front end on a 2010 dodge charger.
zedog3380 1 year ago
Probably the nicest video here, I have two questions, right after applying the sealant part, doesn't the sunroof also have a built in gasket underneath? And you should a piece where we see these aluminum strips, don't they go in between the sunroof and the liner? Confused about where the plastic clips go. No video was shown, other than that, great video.
dcfs2005 1 year ago
@dcfs2005
The strips go between the sunroof and roof panel. There is another gastket that supports the headliner and finishes of the installation. Sorry we did not include that part, we will in the next video.
Thanks for watching.
zedog3380 1 year ago
VERRYY helpfull guys! thanks alot, wish me luck!
ScRoTe1992 1 year ago
An electric metal nibbler was used here.
zedog3380 1 year ago
Wow this helped out big time. I bought the same exact sunroof off ebay. I plan on doing this to my El Camino. What cutting tool did you use? Will a jig saw work?
milkman510 1 year ago
that was insaine, good work, what was the tool you used to cut?
murdernumber222 1 year ago
To me, that's more scary than walking on glass!
JasonKallio 1 year ago