I've got a Slash with Eraser 9.5T, 18/86 stock - 13.00 gearing, but now updated 23/86 - 10.17 with LRP 3600 6cell. I love this combo. Plz check your gearing and post it! thx
Hi there! Which is better 9.5T or 105T or 13.5T LRP I am confused. It seems the 9.5T has more RPM so I guess this will result in higher top end speed with less initial torque? Please write back thanks! I know nothing of brushless yet and am having trouble learning.....
be careful with the alignment of your pinions, and verify your slipper.... I don't know if you'll understand what i mean, my english is poor sometimes....
howcome the LRP v10 spec 4 10T does 44000 rpm at 7.2 and is half the price of one of these, how much would the performance difference be do you rekon, in say, a 13.5 T brushless eraser or a 10T brushed v10 spec 4
You'll see the differences between the original and the brushless :-) :-) . The LRP 9.5T is an approximately 4900Kv and it's very nice with 2WD, the speed theoretic is near 40mph with a 22 tooth pignon gear.
the best video at the e-firestorm :)
JBOisBack 2 years ago
hi!
Gearing?
mrmft 2 years ago
I don't remenber, i didn't have the car nox, but in my memories i think it was the original gearing...
bilbon63 2 years ago
I've got a Slash with Eraser 9.5T, 18/86 stock - 13.00 gearing, but now updated 23/86 - 10.17 with LRP 3600 6cell. I love this combo. Plz check your gearing and post it! thx
mrmft 2 years ago
Hi there! Which is better 9.5T or 105T or 13.5T LRP I am confused. It seems the 9.5T has more RPM so I guess this will result in higher top end speed with less initial torque? Please write back thanks! I know nothing of brushless yet and am having trouble learning.....
msconfigexe 3 years ago
Hi,
Take a 9.5T, you'll have enough torque and speed for a 4x2 in running condition
bilbon63 3 years ago
im having problems when ever i acellerate the motor just judders and sometimes dosent move can any one help=[
uings12 3 years ago
be careful with the alignment of your pinions, and verify your slipper.... I don't know if you'll understand what i mean, my english is poor sometimes....
bilbon63 3 years ago
ive sent my brushless system back for testing running my brushed system and everything is fine so im sure it was the brushless system
uings12 3 years ago
ive got the 10.5 the acelleration is astonishining soz if spelling mestakes im not awake
uingst7558 3 years ago
Have you tested the waterproof part yet?
crunchymaster5K 3 years ago
sincerely no because of the price in France of the motor + ESC.......
bilbon63 3 years ago
ive just brought the 10.5t will there be a noticable diffrence to speed? thanks
uingst7558 3 years ago
from the 9.5t
uingst7558 3 years ago
i don't think so...
bilbon63 3 years ago
ok thanks and what voltage did you run 7.2v or 8.4v
uingst7558 3 years ago
7.2V 4600mA and i could run for 20mn
bilbon63 3 years ago
heyy m8 how long does your car last for
sparco908 3 years ago
hey mate nice vid what i just bought one of these systems and they are awsome. what gearing are you running
joshjackoff 3 years ago
thanks !!!
The original gearing is used.
Fred
bilbon63 3 years ago
Is that Lipo?
PS:Nice vid;)
PyroPiraat 3 years ago
thanks for the vid :-), no Lipo only Nimh....
bilbon63 3 years ago
Thats 7.2Volt isnt it?
And how much Mah is it?
I will get the E-Firestorm with a 8T Motor+ESC...I hope so
PyroPiraat 3 years ago
yes 7.2V 4600mAh with it ran near 20mn, max speed near 50-60 km/h
bilbon63 3 years ago
howcome the LRP v10 spec 4 10T does 44000 rpm at 7.2 and is half the price of one of these, how much would the performance difference be do you rekon, in say, a 13.5 T brushless eraser or a 10T brushed v10 spec 4
loftsy69 3 years ago
u can run lipos in this system only 7.4V but that will make it fly
joshjackoff 3 years ago
Sweet truck:D
Gonna get the FLUX version when it is released:)
Seems to be a great place to bash on!
5/5
Ev1er 3 years ago
thanks :)
bilbon63 3 years ago
Sympa la vidéo :) 5/5
bad2bugs 3 years ago
Merci merci ;-) ;-)
bilbon63 3 years ago
im getting the stock brushless version (flux) on thursday 8th day that it comes out
hobbiefreak 3 years ago
hi,
what do you think about the stock brushless ? What are the technical about the motor ?
Thanks
bilbon63 3 years ago
what camera do you use on the car?
scrivtwin2 3 years ago
Hi
I use a Flycamone 2 ,nice cam, with 1Go card it gives me 1 hour of video. Thansk
bilbon63 3 years ago
thanks seems to take pretty good video!
scrivtwin2 3 years ago
Nice video.Your a good driver.
shaarc3 3 years ago
thanks, we have too a nice spot to run. And the car is "drivable" with this motor, more turns, i think i would have a crazy car.....
bilbon63 3 years ago
Awesome, got one on order with a MM 5700 can't wait.
jbounce 3 years ago
You'll see the differences between the original and the brushless :-) :-) . The LRP 9.5T is an approximately 4900Kv and it's very nice with 2WD, the speed theoretic is near 40mph with a 22 tooth pignon gear.
bilbon63 3 years ago