Interactive Hunteering Bear 4b

[someonetookregi]

thout we missed him at first haha

[Milesy1818]

You're a star Phantom. thanks for your help!!!

[Milesy1818]

Ok, thankyou, do you know how long it would roughly last me, basically I don't do airsoft really often but would like to have a good sniper which doesn't cost me loads. Thanks for your help phantom!

[phantomTMA]

It should last several thousand shots before the sears need replacing (no longer cocks). Remember to lightly grease the spring/guide and inside of the cyclinder. Do not grease the piston or cylinder head. Silicone lube the rubber o ring. Use abit more grease on the outside of the cyclinder to aid cocking action.

Hope that helps.

Good Hunting ;)

[Milesy1818]

@phantomTMA Hi Phantom, I'd like to buy a TM VSR10, what upgrades are recommended which don't stretch the budget for it to be firing at 450fps with 0.2g accurately.. Thanks

[phantomTMA]

@Milesy1818 Buy a 130 spring (the original sears should last a while) and a spring guide with piston would be sensible (the original ones are only nylon). Your spring guide stopper may bend after a while and drop out now and again (making the gun need stripping). If this happens, make a block to stop it dropping down into the trigger mech.

[phantomTMA]

You may struggle to get enough hop for maximum range with heavier pellets. I found a firefly hard VSR bucking gave good range in my BAR10 with 0.30g. Use a couple of layers of some teflon tape to seal the rubber onto the inner barrel.

Use any 0.30g ammo if you are on a budget.

Good Hunting ;)

[navysealboy62]

So far so good :) Great idea phantom!

[PatriotXIII]

nice, when you see the bb cut the grass!! :P

2 damn adictive!!