Basic sketchy physics

[SuperDogbrown]

very interesting video thanks

[blazzer931]

@nitroghost666 did you find a fix for the bug when you push play

[originalfizixx]

People love to put music to their vids. In only a few cases has it ever been appreciated or appropriate. Most people don't like it.

[deano39]

@originalfizixx

I tried to change this music to easy listening, but it seems to be stuck on this song...???

[cipm66]

Thank you. Was helpful for me.

[silentecho999]

could you do this vid again but with explaination instead of music i keep trying what your doing but the top part of the piston doesnt move with the rest of it and the middle part just flops about the only part that works is the back pear shaped thing that rotates really need help! or can someone else make a better vid and send me a message telling me the URL link so i can do it!

[TheLegokermis]

I make a fairground attraction called the twister but the arm up to where the wheel sits on the wheel itself does not count.How am I supposed to do

[simtitan1]

every model i make for sketchyphysics just falls down

[heatshot241]

@simtitan1 you need to make it group first then try it and secont try make a fgroup floor

. :)

[mrpwnedish]

@nitroghost666 ya that happens to me sumtimez too...

[misskellyx21]

This music is too distracting from the whole point of the video.

[deano39]

@misskellyx21 You might want to try mute.????

[misskellyx21]

@deano39 You may want to find a better interest in music when it's about "Physics" (:

[heatshot241]

@nitroghost666 when it's overruned it clushes one of the clushes was the bug splat :/

[heatshot241]

@nitroghost666 this happented to me when i was using sketchy physics!

[badwolfshamma]

do you know how to put suspension into cars

[booone222]

what's that song

[loko95ftp]

song

????????



[TheFirespiter]

@loko95ftp IDK the song but i know its edges theame song so look that up and you will find it

[TheFirespiter]

@TheFirespiter found it its Alter Bridge - Metalingus ;)

[deano39]

@nitroghost666

????????????

[Jibe111111111]

It's a shame that you don't give explanation

[deano39]

@Jibe111111111

???????

[zZZzzzSnooze2nd]

@deano39 ????????????

[randomguy1029384756]

@deano39 ????????????

[madalert]

@Jibe111111111 It's not a tutorial tho

[GTAtricky]

@RALPH94ful click on the "UI" button next to the play/pause button to open Joint Settings

[MrKto12]

how do you get the sketchyphysics toolbar up?

[Jibe111111111]

@MrKto12 Just click on the line of the bar and slide it up.

[MrKto12]

@Jibe111111111 thx

[Flipbooktoons]

Steam by Valve, wait what?

[pitupraveen]

@deano39

thanks for the video

initially, the joints were not working....... things kept falling down upon playing the simulation,,,

then I came across this link - code.google.com/p/sketchyphysi­cs/wiki/Docs

[happygamestvfun1]

ur musik - shity

[RALPH94ful]

i cant go in the joint setting

help

[deano39]

@RALPH94ful Sorry dude, haven't touched sketchy physics in almost two years.

[pitupraveen]

@RALPH94ful

code.google.com/p/sketchyphysi­cs/wiki/Docs

[Esperantistik]

@RALPH94ful Joint settings works only in version 2 of Sketchy Physics

[freederikk]

@RALPH94ful use the UI button

[haziel2050]

gracias :D

[Stijning]

I didnt have some of the tools you used, like that one you used at 0:36

[momorgoth]

@Stijning That would be the Scale tool. you have it in basic sketchup

just use the Large Toolset, from the view/toolbar menu

[Stijning]

do you use the pro version of sketchup?

[SYICreations]

Bravo, I didn't think about the piston. Going to go try it.

[tomek9231]

Hi !

Please i can't give Joint Seetings. I don't know why !

[tabhorian]

@tomek9231 Me either. I changed it to version 2 and restarted, then I have it, but then I can't use joints so I switched it back to 3 then nothing works right

[TheVideoMaker2010]

where did you download sketchyphysics RC1? It say i have to get it but i cant find it anywhere. Please help

[tabhorian]

@TheVideoMaker2010 me too

[Padawanjuliotrinidad]

its really good and works perfectly thanks, if you can do better things, please, show us how to make them, you help me a lot, and I am a trainer.

And the music doesnt suck, it makes the video more interesant and atractive.

o00Hyper00o is stupid

[deano39]

@Padawanjuliotrinidad Thanks for the kind words, but I haven't use sketchup in over a year now. I've moved to solidworks.

Thanks again

Deano

[MekazaBitrusty]

@deano39 I'm sure Solid Works is nice, if you can afford the uber high price they charge! I'll stick with sketchy physics.

[PreVaylMusic]

@deano39

Im looking to move to a bigger and better cad software how easy was it moving from using sketchup to using solidworks?

Im really interested. Im great with sketchup bu i didnt go to school for cad design. and info will be great help

[tiggerbiggo]

it dosent work! what you do at 3:03 ?

[luno44]

can this animation play as a kmz file, or play in augmented reality?

[ZenSka017]

how to get this software?

[whitesox333666]

move the link down onto the motor'cam's link rotator grab the piston click on the link's attachment point move the piston to the link's piston attachment point Select properties Select the piston select the link's piston's rotator select the slider position it on the red axis select properties select the slider select the piston select play

[whitesox333666]

Select make group Select the motor-cam's link rotator. Select make group Select the motor-cam. Select the Properties Select the motor shaft's rotator Set joint settings acceleration = 3 damping = 0.8 Select the link lift it up and place it over the motor-cam link rotator click the link's motor-cam end select properties click the bottom of the link at the place you want the rotor attachment point Click the motor-cam's link end rotator

[whitesox333666]

Make motor-cam, linkage and piston objects

select piston

Make Group

Click on rotator and drag to motor-cam motor shaft axis and set vertical axis.

Put another rotator on the end of the motor cam. set vertical axis

I think he's selecting the piston in the area near the link

now move to the link.

Put another rotator on the piston's end of the link. set vertical axis

Select the link. Select the link's rotator at the piston-end.

Right click

[benythebot]

did EXACTELY what you did. the only results was the rotating section (far left) simply fell. the two other sections did nothing...

[Enzo0912]

I made this and it worked also!

[Superparkesalvaro]

Give me your messenger the google sketchy physics to happen to me please please please

[o00Hyper00o]

music sux

[thefoxdude]

yea i made it 2 it worked :) ty

[astarhell]

Alguien podría decirme por favor como se llama el programa?

[dolt16]

SketchUp con "plugin" se llama Sketchy Physics.

[dogggfight9999999999]

cool i love your videos

[JoshTrevisiol]

when i click on joint settings it does nothing, it does not pop the window up XD...

[sjogge123]

Thank you so much this is a video thats finally show HOW TO WORK WHITH PHYSICS

[geraldoodenir]

Thanks!

Muito Bom! Ótimo tutorial!

[pixelneo]

Exelente Muy bueno

[notsoordinary95]

lol mines fell apart lol :D

[bitchassshit]

lmao

[4c3ddf5a]

Thanks. now a can do it

[eat74]

how do i install sketchy physics because im haveing trouble.

[Slench101]

this thing became my first working model thanks to you!

[deano39]

Glad it helped.thanks

[BIGCAL50CAL]

Hello, I would LOVE to have sketchyphysics but i have no idea how to get it. I understand you need sketchup as an "engine" to run sketchyphysics but idk how to run it PLZ help. Answer ASAP

[deano39]

Google it, they own it. As far as help I'm using solidworks now. Havn't touched sketchup for a while, sorry

[happygamestvfun1]

@deano39 Whats the best CAD software? i need to make a robot

[lalalandd123]

lololol!!! deans my name and i just klicked on a random vid!!!!

[RapidSkater1]

ok now it works :D

[RapidSkater1]

its wont work, i dont understand this shit! :'(

[halomaster1177]

instead of using a hinge on the first peice use a fuckin motor

[timspy]

its not very hard its very easy

[MuntHouseProduction]

A tutorial would be nice

[club559]

THIS IS IMPOSSIBLE

[club559]

THIS IS NOT BASIC I can't do it :(

[Pintoleite3]

i cannt believe you, it is so simple, i did it at first and never had used sketchyphysics before. just do whatever you see in the video

[BLANKERAMA]

did it repeatedly, NOTHING is happening!

[BLANKERAMA]

nevermind, I gotz it. watched what he did more closely

[Pintoleite3]

good, now try something harder, like complex the piston you made through this video

[15milkshake15]

I am the one that posted the video comment at the top and i found it really simple to do.

[timmorthorst]

I have easily made sketchyphysics work. But my problem is to make the components stick together. I have tryed making the piston, just like shown in the video, but when i press play, the components fall apart. Please help me.

(rammstein _ ichwill @ hotmail . com)

[biteme2367]

You have to choose the connect joint button and select both your joint and the group while holding down the Ctrl key

[estonia123]

i dont find that toolbar i havent it

[Gosox2525]

WHERE DO U GET SKETCHY PHISICS

[Woolies2007]

Try googling it dumbass

[Gosox2525]

hey stfu i did i found it a while ago

[elvemageownz123]

It says error whenever I press play, please pm me!

[deano39]

sorry dude don't know. I would uninstall,reinstall.

[TheGreatChickenDude]

Cool

[eugie81]

can anyone make a verry easy tutorial for the verry stupid people?i dont even know how the activate physics

(i did download it and add it to the plug ins)

[deano39]

view--toolbars---check sketchy physics

[friskm3]

i extracted the sketchyphsics file into my plugin in folder but now i get an error saying something "clearconsole not found" when i start sketchup. am i suppose to do something else? cuz if not im just gonna re-install and try again.

[deano39]

sorry don't know

[triggeradam]

what button do you press to pop that tab on physics?? i downloaded it but i forgot how to make the tab box appear

[15milkshake15]

iam trying to make one of these.

[OMGLOLOLOLOLOLOLOLOL]

OH YEAH TYVM i was really looking for a tut on pisons and i made one myself! anyway my name on the warehouse is voidmaker

[deano39]

It's called sketchup with SketchyPhysics plugin, it's free and a lot of fun. Just google it,they own it.

[Koko665]

What program is this? This looks like hella fun.