How to (kinda) make your own Soda Can Jet Engine! MLCCS Mark I

[rab3286]

osama bin laddens dream...

[Inspironator]

LoL...don't give up. Learn from this and keep trying. You can succeed!

[whatnottobe]

Aside from all the other comments I think you did pretty good :)

[alexXx911922]

but will it blend



[JustinJJHCS1]

did you ever think of Using muffler cement to fill gaps and Holes it sets in three Hours and Is cured by Heat. Appoxy will just burn if you do not use High Heat which is expensive muffler cement is about $3.00US it is Costic so us gloves and a Putty knife

[samopompey]

that was a fail!!

[RINAT1807A]

пхахахахах



[VyseAcher]

I did something like this when I was a kid. Didn't work for poo. I didn't understand that the air needs to be significantly compressed (like 2:1 or better) before using it for combustion or you won't create any significant thrust.

[BladerDark1]

Не в ту сторону раскручивал.

[ba470]

hahahahah very nice I love that, I have had same as that time ,nearly fuck my workshop but I didn't give up LOL

[spitpsychoshit]

I LIKE to randomly post WITH CApitAl letters. -_- sorry but the below comment gave me a headache when I read it. Lol

[SVTRMODDED]

HIGH TEMP PARTs ARE REQUIRED. or something MIGHT BREAK AND YOU DON"T WANT THAT. and i would not use JB WELD on a jET engine. it won't hold. the HIGH TEMP. get a WELDER. nice video. or use HIGH TEMP Bolts. and seal with HIGH TEMP stuff. HINT look up TURBO CHARGER's DON"T BLOW YOUR SELF UP.

[davidemive]

idiot



[davidemive]

@davidemive

[SuburbAllied]

I must say, you did made me laugh pretty badly when you finally stuffed the whole exhaust chamber with paper and the engine was like fffFFFZZZZZprrrrrf and then cut! And the way you finished the whole show, by just throwing the whole thing onto the floor... price awarding! :D

[bneysa]

How to make turbine rotor for turbojet engine

[jasc68]

quel con!

[FreonRose]

Do you still have eyebrows?

[gz06geo]

)))))))))



[kingulove100]

aaajajajajahahahahahahahahha

[gyodai]

What a mess!

[iamjust2stone]

dude u got to much time on your hands

[terrence101494]

75 people did not understand

[idontcarewatuthink]

There are a few minor things you could've done different that would've made this turn out a little bit better.

[WhiteKestrell]

@idontcarewatuthink Like?

[idontcarewatuthink]

@WhiteKestrell well for starts, if he replaced the computer fans with an actual compressor and turbine from say, a small turbocharger, that would instantly produce better results. Compressor and turbine wheels are designed to move the max amount of air per unit volume. I'd say there's definitely a turbocharger just lying around somewhere that would have the perfect size compressor wheel and turbine to efficiently utilize a soup/soda can

[WhiteKestrell]

@idontcarewatuthink Yeah the computer fans aren't very good, plus they're plastic. Uhm don't know much about turbochargers lying around but if the PC fans were to be replaced by homemade steel fans, would it be any better? Also, don't turbochargers use centrifugal compressors? The fans are a bit different than axials so how to use them here?

[worldeaglewu]

That was great! Keep it up, this is some good intelligence and ingenuity.

[nqwern]

Дурак надо было горелкой прогреть все и спереди ее поставить чтобы воздух шел прогретый и сзади уже поджигать

[christianthebom]

yeah lets use a material with a verry low melting point to make a gas turbine engine caseing

[KYLE6626]

dude that's funny lol anyway i'm going to help u out a little in order to keep the flame constant u need to have a better fueling system ok oohh an i like the way the blades were set

[buckhunte24]

use a oil soaked rag. also make the motor suck up the flame have a rod go out the front through chamber conected to a grinder

[StickRunHackz]

Before this i still had hair, now...

[gettofox1]

hi take a look at my jet turbine i could help you out.

[clauselan]

This is not an engine.... Just a flame blower.

[PaulPreddy]

you need a proper combustion chamber in the right place with swirl tubes inside+you need a diffuser behind the compressor wheel+you need nozzle guide vanes between the combustion chamber & the turbine wheel.

[vSxScopeZz]

how did u make the turbine fan?

[unlivingmark]

Cool idea, however what you have now roughly resembles an afterburner. What you need to do is introduce and ignite the fuel I between the sets of blades. The first set brings in air, and the second set is turned by the flow of burning fuel.

[chmellen]

Maybe, it's your fuel. Something more hotter.

[gilerarunner007]

:D Uuuups

[zzzzzzzzzuuuuuubbbbb]

Автор ты в детстве головой не бился? Еблан... На дыбу тя сука

[khyron6]

Fail

[bearpatch626]

if there was a way to soder it i think would be a better idea instead of clamps... more so cause your dealing with metal not rubber tubing ..... remember its gonna get hot, anything you can use that wouldnt heat up would be a good idea ;)maybe use magnetic type of bearings... good ones can stand quite a few degrees :)

[bearpatch626]

if there was a way to soder it i think would be a better idea instead of clamps... more so cause your dealing with metal not rubber tubing ..... remember its gonna get hot, anything you can use that wouldnt heat up would be a good idea ;)

[AIRBUSMAN1978]

Its great to see America still has imagnation, keep it up kid....if it doesnt work the first time...try try again.

[XTwina]

@AIRBUSMAN1978 and again and again and again and again .....

[jetflyer96]

next up: ;plastic cup time machine

[lovesthecity3]

@jetflyer96 Or Brown Bag Nuclear reactor....

[superfunnyman123]

i gave up on myt soup can jet lol. this shit is fun bet way to fucking dangerious lmao. maybe one day ill make another that will work

[Skoda130]

No, mate.. It didn't work at all.

[madjimms]

Why don't you put the flame in FRONT & back.....

[freedrink999]

your'e bearings are too ruff man

[brisdude2007]

yep, flux compensator

Keep on trying

[ryasco]

your work area looks like a tweakers paradise, jesus

[mofred]

Great job.you News a flux compensator

[BRoboto1]

I liked your sense of experimentation. I was liked you few years back.

Here is a good book that will help you to understand how this things works.

You will find it in amazon and its title MODEL TURBINES by KURT SCHREKLING

[dzdice]

Ok! It worked..!

Try without the band and... good luck next time! But watchout for high temperature rise... You'll need to have something that withstand at least 550 Celsius, but for safety sake try using something that withstands 700º..!

I could say that this was near awsome but that little fire killed the party anyway... keep up, that was neat! :) To perfect it.. use some math ;)

[worahr]

will put "the thing" on? what is this called? good knows what sheet metal and

2 r Pi can do..

[pacanas9999]

I hope you know that fire blows out when wind reaches over 10m/s. to build this thing you have to sustain low winds inside by using V shape part... google

[Nitrozzy7]

I think you need to go bigger. Try 1lt beer can... Had the same crazy idea, but I'm still trying to iron out any possible design faults in my head before building it.

[WXIIIR]

now that was fun.

[jeffroboy48]

You really want some advise you could build it with actual steel, weld it all nice and pretty and do it rite just by using some 1/16 inch sheet. One big problem your obviously having is there is no neutral guide vane and no turbine. That will produce the power for the intake or what ever that thing is. Listen if you have this much time to kill do it rite and post another video. Get diagrams of RC engines and start from there its actually very simple, if you need help let me know.

[ADNihira]

"It worked for a split second"

muhahahahaha! It was only a bad experiment without any kind of technical awareness.

[airman122469]

*sigh* Please leave engine design and construction to propulsion engineers. This is a rather dangerous endeavor, especially since it is clear that you have no idea how a turbine engine actually works. You seemed to get it at the end however. Turbine engines must be ignited from the inside in the combustion chamber, not at the nozzle. Also, one must ALWAYS run the compressor BEFORE trying to ignite the engine.

[zillionz]

ffs i cant believe i spent the last 8 minutes looking at this only to see u nearly set the house on fire

[Angularocillation]

nice vid man, great idea with the bike bearing, i was wondering how i could have a bearing with shaft for compressor and turbine. i think ill try this with some stove pipe and steel blades.

[richardarichter123]

fire fire fire danger will robinson

[Guirreme]

kkkkkkkkkkkkkkkkkk

[AstraCoLtd]

WE Recommended TO WATCH PRESENTATION MULTY BURNING ASTRA X2

[nakazatoGTR]

try scoring to get some stainless steel parts. i think your almost there in regards to an axial flow thing.

[tyler42773]

hey cant say you dident try :)

[tyler42773]

hey cant say you dident try :)

[shamimmoohebati]

you sucks mannnnnnnnnnnnnnnnn :))))))))))

can't stop laughing

[Mr3wheeledbike]

cool you tell me how to do this i really like you model

[blckcloud15253]

Clean up your workshop holy shit I thought I was messy

[fuseli1]

and it's gone

[genwave]

FAIL!

[Aikidophile]

Good on ya, that's brilliant. I'm an A&P mechanic/Turbine Engineer with Delta. If you'd like, I have a couple suggestions. P.S. you've inspired me to try the same! And don't worry about the haters - haters gonna hate! You're the man!

[winterka100]

You've invented the combination Flame thrower/Fire extinguisher.Nice try though. Great commentary!

[wyz2285]

you need a fuel injection system ...

[TheNewfulluser]

JAJJJAJAJAJJAjAJAJJAJJAJAJAJAH­AHAHAHAJJAJA FIREE FIREEE

[ROCKSTARCRANE]

LAUGHING MY ASS OFF!! So funny when the whole thing fell out of the clamp...

But hey, kudos for trying!!

[Klause5425]

why not make the combustion chamber in the center?

[jlund72]

in order for it to sustain it needs a liget combustion chamber not aluminam cans and the fuel is supose to be in the combustion chamber

[koffeekage]

@jlund72 did you mean legitamate or is that a word im not familiar with?

[jlund72]

@koffeekage i didnt feel like typing the whole thing

[combustercan]

Can you leave one of the flanges of the hub (where the spokes went), maybe you could use it as the fuel injectors, you will likely need to close one side of the flange spoke holes, just an idea i had, might be possible.

[rantsila]

moahhahahahaaaa!!! what a .... was that

damn cool jetengine man

[combustercan]

@rantsila Can you imagine a guy at the airport throwing petrol/avgas soaked rags into the back of jet engines, & then throwing boxes of lit matches in, while his mate spins up the engine with a massive hairdryer..LoL...LmFaO..

[SuperBraymond]

so me and my friends want to strap a jet engine to a skate board essentially would tis work if it was put together better and if not any plans or links to videos or anything to make a small jet engine? please respond fast!!

[Pitchplus8]

where was the jetengine ???

[Steelwheels18]

Next time put wd40 in the front and once you light it spray it in the front and turn it on

[dojomatt98]

That was the stupidest 8 minutes of my life, but it was freaing cool!

[Me102288]

hmm you might want to make it the same way proper turbines do, they inject the fuel while its spinning, hence doesnt blow out the flame.

try wil a can of wd-40 or other various flammable injectables and a glow plug fro an r/c aircraft or car hobbie store. on the right track.

[c00p3rn4t0r]

haha that whas the best jet engine i ever seen :)

[TheMANDING0]

HOUSTON WE GOT A PROBLEM!!!

[Unasigad]

@Gaussgundesigner Nice work mate! But how do you make and shape the blades?

Thanks!

[metalrain300]

You need to make that combustion chamber smaller than than the intake of the jet that way when the air comes in it is compacted and when it combust it will get more kick to it than the exhaust needs to be a little smaller only by a little.

[Allexxx96Reloaded]

I wonder how Henri Coanda made his jet engine

[cj15941]

Don't let people hate on you for wondering if you can do something. Keep up the good work cause I'm subscribing to you.

[Nrgzrbunny777]

you need to try an aerosol based fuel like wd40 or carb cleaner. just spray it into the intake.

[marcomovies97]

what kind of fuel do you use?

[marcomovies97]

looks cool!

[fsant653]

I just love how your engine almost destroys your itself :D It works then you think yeah good job, and then whoof =D nice job, take another rubberband and improve it, I'm gona try this to

[slamdvw]

For the people who say it can't or won't work... what harm came from trying? Good job guys!

[GerbilEssences]

ROFL at the dremel power, nylon cable ties etc. EPIC KLUDGE!

[jpodejko]

ghetto jet :D love it

[Frezzy901]

I was LMFAOing from 6 minutes onwards!!

[criticaboutvids]

You'll never be able to make a jet out of a soda can, because they are aluminum, and suck for holding structure under intense heat.

[7249xxl]

always safe to do this inside

[snakev10v5]

becareful when fiering this up dude, it may blow up so when you do put somehting bitween you and it.

[CRAZYSTOO]

whatever! this is awsome because there is fire involved and people might get hurt.

[JOCKATEO]

better of using a pepsi can as it is steel

[joshskeet2]

um sir ,its not going to stay lit without gas sir. i have some fixes but nno money i wish i had the proper materials to make one of my own but nice vid

[aeroangrymoose]

you know aluminum melts at around 1600 Fahrenheit right?? and bicycle crank bearings are designed for around 100rpm?? 

[manunggal]

what you made here is suck, but..... I believe you are not talking result, its the process in making it, the "not being couch researcher" is the point. On that one, good job my friend, keep going n I will come once in a while to see more of your progress. cheers.

[afterthefox7]

a fire hazard

[alif2009psp]

COOL @ 8:03 

[danielsuser]

Awesome effort, shame it didn't work. Great idea though.

[David3040]

It would work better if you had a constant fuel source like natural gas.

Also trying to get the dremel to run at a lower RPM as it's just blowing it out before it can start combusting properly.

[GeneralGoopy]

its not a jet if its getting its energy from the dremel! all youre doing is blowing on a fire.

[scuffieduffie]

However its not possible to make a working jet engine without the tools needed. And even with the tools needed a verry difficult job and requires a lot of experiance on the lathe.

Try a pulse jet or even a turbo jet if you are interested in this.

[asem182]

the bicycle shaft was a great idea

go ahead

[deathnote667]

fail lol

[anzimals243]

you need to hav less power from your dreamal may i suggest a small cheap rc car motor

[baltasavr]

дал ба ё бы!!!

[medvedev99]

ha ha ha crash jet!

[thehammernator]

use muffler tape for the gap

[rcadena59]

You need to use a 20oz soup can and for the fuel you can use copper tubbing and propane tank for a blow torch. Hopefully that will help you

[tosiyuki691]

アルミの融点てきに燃えちゃうんじゃ？

[reverserbank]

nice try but doesn't work at all

[mestre05dongue]

i,i,i,i,i,ii,a,a,a,a,a,a,u,u,u­,u,u,uu,

[juraji0]

ok well if you dont have a welder then you ca use JB weld, its good for pretty high temps , it should sustain it self for a bit.

[juraji0]

Use propane , its easy to ignite and control and your turbine blisk should be made of steel otherwise you will burn off the blades, you dont need consistent spark if you make a efficient combustor can.

[juraji0]

You can not use cans, not aluminum cans anyway, there too thin and if you actually sustained combustion it would melt the cans in seconds. Bearings are another point of concern, you need high speed high temp bearings and if you dont want to get in to difficult lubrication then just use ceramic bearings ang pre lube them before every run. For combustion you need high presure air not high speed so you need to make stators after the compresor and just before the turbine blisk.

[havaden96]

many stupid comments here...

Well it WORKED, good work!

it is hard to make a jet engine anyway but from the matrials you did use?!

[blufgan]

I made something similar to that we used a combination of PVC and aluminum sections it was a project we did in a aerospace engineering project at UF we used a electric spark generator for the ignition system since its consent spark and used a homemade map gas system for fuel it worked very well Cheers

[kamaetara]

very nice. yeah the combustion has to be inbetween. try mountung propane nosles for a constant flow of fuel. I like the bike bearing though. never thought of that

[505thtimmy41]

Its not heating up the air fast enough.

[Rambo186958]

hahahhha great end :D

[Rambo186958]

hahahhha end :D



[asdffdasasde]

LMAO @ the end!

[yTubeBlowsBigBalls]

It's a good proof of concept but you can't run this with bike bearing, it simply can't handle the heat and pressure for more than a moment. You need a sealed bearing that you can pump oil into in order to cool it for continuous operation.

[2807pako]

you made me lose 8 minted in vert your bullshit

[Gaussgundesigner]

@2807pako you might want to use spell check there.

[Penko83]

@2807pako Actual proper lol

[gus23a]

next time, do not use rubber bands.

[099santos]

fuck jet  engine

[speedy02]

Fail..lol

[traxxaslover123]

research to design of jet combustion chambers, plz!

[deadguy237]

try jb weield 

[jetenfan]

first of all u r a genius man.....and i think u need to work on a fuel injector........and a flame tube ...tat"s wer the problem is.......and wen u r startin the engine start the turbine shaft wit a low rpm and then increase it steadily......so tat the flame stays inside the can...........

[kdvlder]

That's a good effort. This is just an opinion but I think you should start working with small pieces of sheet metal. You can make your own spot welder out of a transformer from a microwave.

[Gaussgundesigner]

one cannot solder to aluminum.

[luderunner89]

@Gaussgundesigner you cant solder but you can tig weld and ive done it before with two red bull cans in my welding class when i was board

[BarsMOnster]

@Gaussgundesigner You can solder to aluminum. But it is not easy, special flux & solder needed. I have both.

[brickwall911]

@Gaussgundesigner solder is made out of aluminum and led.

[ETERNALinstants]

@KYLEZ0R09 Yeah man. When I was 5 i would take things apart put them together make things for arts and craft ... nowadays all they do is watch tv play games I even saw a kindergardener with a cell phone.. WTF? What happened to the coloring books and crayons?

[Gaussgundesigner]

Well, The point of this project was to make a small self sustaining jet engine.. and yeah I made progress but I also almost burned down the garage lol. My main drawback is that I have no way to weld on materials that I get from dumpster diving. So many holes and weakpoints and no way to reliably make them snug.

If you look at some of my other videos you'll see that I made a second with a fan from a bathroom.. though it became more of a thermojet.

[bbvigfh1]

that would help if ik how the jet eingine it self worked

[ETERNALinstants]

Man. : ] Why don't more kids use their free time for this? : ]

I see a bigger fan there. Are you making a bigger engine? ;D

[RetardedDrummer]

Good effort... but its not got a chance of working without a flame holder, and stator vanes between each compressor stage to straighten the swirling air.

keep up the good work!

[Gaussgundesigner]

@RetardedDrummer

well, this was mark I. check out markII for a slightly improved version of it. Id love to add stators at both the turbine and compression sections of it, but i have no idea how to secure them and make them that small out of easily accessible parts.

[BeauKnight96]

@Gaussgundesigner you need to make something that keeps pumping gas into it and you need to make something that keeps ignighting it

[N00B283]

nice vid an i will try to make it thanks