KWA KM4A1

[airsofterFilax]

????

[airsofterFilax]

Can I put ris rails on this gun on front. I mean ris handguard.

[CQBRadio]

@airsofterFilax yes

[rsrip12006]

@CQBRadio hey whats the hop up like. is it a 1 piece metal? or is it one of the 2 piece ones i've heard is in the kwa from like 1 person lol.

[DeathShepardAirsoft]

@NABDABOSS both are wrong. Whoever told you that is full of shit. KWA dose not manufacture in the US. Their shipping and customer support however are but not their manufacturing. KWA, like all high end aeg companies, are manufactured in Taiwan.

[LILWHITEISTIGHT]

not that agm is crap... agm is the best gun i have now..it is a great gun........i just dont like guns that break like the really cheap things

[LILWHITEISTIGHT]

i have an agm m4a1... i am considering buying this gun for a long lasting and reliable gun...i am tired of getting crap guns... im ready for the pro stuff

[NABDABOSS]

ok wait can someone plz plz plz help me. I just ordered this gun and apparently there is one made in taiwan and one made in america, correct? i did some reaserch and ppl said the one from evike is the american made one. is this true?

[chubmcy17]

Shit gun. Mine broke in a week

[bluntsofpaka]

nice review...

[CQBRadio]

@bluntsofpaka Thanks man.

[Nazruxxx]

@CQBRadio

LOL.. is that the same gun like the AGM M4A1 ? Because it looks like that. I have that gun from AGM and my question is is there a chance to change the front gripe? because its made of very unstabil and bad plastic. PLs pls answer <3

[CQBRadio]

@Nazruxxx Totally different gun.

[Nazruxxx]

@CQBRadio

could you tell me why? would be nice

[CQBRadio]

@Nazruxxx Better internals, better externals, better range, better QC when they are made, better warranty.

[NavyAviation2016]

@Nazruxxx Not even remotely close to your AGM clone gun.

[Nazruxxx]

@NavyAviation2016

think i didnt asked you

[NavyAviation2016]

@Nazruxxx Awww well too bad. I'm the one with this gun and you're the one with the Chinese piece of shit. Cry about it.

[Nazruxxx]

@NavyAviation2016

hahaha ypu seem to have some big big problems dude. While thinking you are a better person with your nice gun you are just a little assfucked idiot

[NavyAviation2016]

@Nazruxxx da hast du Falsch mein Freund. Grüß, aus Amerika! haha

[Nazruxxx]

@NavyAviation2016

what? oO

[xXcanamXmanXx]

were did u get taht batterie?

[CQBRadio]

@xXcanamXmanXx Came with my Classic Army M15A4 Sportline.

[chaeairsoft]

how did you get sponsored bro?? im deep into airsofting and would looove to get sponsored

[MrGlockJock25]

How long does the battery last

[Snapshot290]

@MrGlockJock25 depends on the battery

[andromedarr]

@MrGlockJock25 Depends. The rule of thumb is, that Semi uses up about 2 mAh (i know that mAhs cant be used, but it is to make it understandable) o the battery per shot, and auto uses about 1 mAh. So a 1600 mAh battery will last about 800 shots in Semi, and 1600 shots in auto. but all of this can be different with a different battery and gun.

[Steven6501]

Is this the CQB cuz the hand guard in the regular one is high-polymer

[MrBladedasher]

what type of delta ring does it have

[sc81kdeterb]

Is there a functional bolt catch on here?

[CQBRadio]

@sc81kdeterb Negative.

[cobraz22]

Only 130ft torso size. My god I can hit a torso sized target around 170- 180 feet with .25s that's without hop up and tightbore

[JoeySTM]

Does anybody know if I order a 9.6 intellect nunchuck battery will it fit? Also if you know of any good mid caps to suggest I would appreciate it.

[CQBRadio]

@JoeySTM I've found a butterfly will work better than a nunchuck. I don't think a nunchuck even fits if I remember correctly (I'm out of town now so I can't check). I ordered JG metal mags and they've worked well.

[JoeySTM]

@CQBRadio Thank you. I'm looking forward getting this gun.

[RunescapeFizz]

@CQBRadio It will fit.

[wakeboardize]

@JoeySTM mag or pmag midcaps fit and feed

[HunterTango384]

@JoeySTM nunchuck works fine.

[RunescapeFizz]

@JoeySTM it will fit, thats what i use.

[MiTechReviewer]

Great review, 5 stars and a Sub.

[xFieryAssassinx]

*new

[xFieryAssassinx]

Probably the best review for this gun to date. Quick yet detailed and only says what needs to be said. Really helped me out with my nee KWA. 5 stars :)

[mafiajimmy]

my friend has a airsoft shop and he has the second generation kwa with the blue body finish. are those good as this one?

[CQBRadio]

@mafiajimmy I haven't had my hands on that kind, but KWAs are great AEGs.

[awstehnn]

i want to add a simply weaver rail to the lower handguard of this gun. Is the battery compartment too tight of a fit to add this on? The weaver rail attatchment mounts with short screws and bolts through the handguard's holes. Can it fit?

[CQBRadio]

@awstehnn I did that with UTG rails - it does work, but you'll need a nunchuck battery to fit in after because the screws don't allow a normal mini to fit in.

[xtremeist9]

mine sucked ass haha maybe i got a lemon

[ak08191]

can the front sight be removed? plz respond i am thinking about buying this gun

[ak08191]

can the front sight be removed?

[AlphaX500]

Can the magpul accessories fit on this?

[CQBRadio]

@AlphaX500 Depends which ones.

[AlphaX500]

@CQBRadio The newer 2gx version of this exact gun

[CQBRadio]

@AlphaX500 My bad - I wasn't clear - what Magpul accessories? I know the sling ASP doesn't fit well on this guy.

[AlphaX500]

@CQBRadio Ohhh okay sorry i wasnt too clear. I was refering to the magpul handguard and cts stock. :P sorry bout that

[CQBRadio]

@AlphaX500 CTR stock - I doubt it. I worked at putting a URB stock on it and things just don't fit very snuggly. The handguard should work - I've seen pics of this on the Airsoft Canada website. Just Google KWA M4 Magpul and then click on images.

[shitfuckershit]

@AlphaX500 i think the ctr stock fits check kwa forums there is a thread about third party items which helped me alot

[AlphaX500]

@shitfuckershit hm alright thanks.

[gametheplaya]

@CQBRadio what stores could i buy this gun or other kwa guns at? or is it just online and if so wich website would i but it at?

[CQBRadio]

@gametheplaya I got it from Airsoft Extreme - great company, great customer service.

[silenceimurderyou]

umm doesnt evike do the "cardboard review"?

[ConsumeYourSoul619]

does anyone know if these are compatible with jg mags? please respond

[BeastlyAwesomeness10]

Hey, I have had a gamface AK47 and a tompson M1A1 the AK broke two times and i returned it twice and the M1A1 broke once and i returned it.Do you think this gun is the best M4 from kwa or Classic Army or is there a better?

[CQBRadio]

@BeastlyAwesomeness10 KWA, VFC, G&G - also great options for M4s. I think KWA is tops out there.

[BeastlyAwesomeness10]

@CQBRadio thank you i got the gun and its fantastic i am going to alabama to a 12 on 12 game in the woods and i trust this gun best gun i have had so far

[CQBRadio]

@BeastlyAwesomeness10 Glad you're liking it - KWAs are excellent AEGs.

[190gamer13]

What type of battery should I get? A crain type or a lipo and what volt?

[CQBRadio]

@190gamer13 i'd recc a 9.6 nunchuck NiMH

[190gamer13]

@CQBRadio Ok, But is the nunchuck battery the same as a crane stock? The store i'm goimg to but it from only has a crane stock battery in stock, Thanks!

[CQBRadio]

@190gamer13 No - they're different. Check it out on-line - you'll see the difference.

[AirsoftGunsAndBbGuns]

hey, sorry for this dumb question just wanna be sure . on the hopup for m4's. there is a screw on the hopup thing. do i put a screwdriver in it and turn it left or right? or do i put a fingernail in it and move it left or right? thanks!

[CQBRadio]

@AirsoftGunsAndBbGuns You can just turn the wheel - no need for a screwdriver.

[AirsoftGunsAndBbGuns]

@CQBRadio okay thanks man!

[Paintdizzle17]

carring handle is not full metal

[sumarow]

does it shoot semi,3 round burst ,and full auto?

[T9w0rd]

@sumarow It has safe, semi, and full

[TheTobyKing]

im new to guns and airsoft so dont insult me here plz but what is meant by hopup/adjustable hopup? thx for the help :)

[CQBRadio]

@TheTobyKing All good man. Hop-up is a system that puts backspin on your BB so it will travel further. If it's adjustable (most are if they are in an electric gun), you can set it higher or lower to get more or less backspin.

[423tk]

good review

[Dince011]

Hi there. I also have this gun and I want to ask about how to change spring sence I have no experience opening up airsoft guns. Do I have to open up the whole gear box or can I just change from the back where the stock holds up ? I want to "downgrade" it so it does 100-110 m/sec. I've seen some airsoftguns being open from the back, and is a lot easier to just unscrew the spring piston or what you call it from within, to change the spring. Suggestions?

[CQBRadio]

@Dince011 There are a lot of different vids on-line on how to up-grade. This guy does not allow for a quick-change spring but if you are comfortable getting into the gear box, it shouldn't be a huge deal to swap out the spring.

[camy365]

WHICH ONE TO GET, THE ARES M4 OR THE KWA M4, and dont say the one thats more expensive just because ull make more money, thank you

[Ryldrin]

@camy365 Who said Carp gets paid for any of this?

[camy365]

@camy365 well u know what i mean, which one though?

[TheSecretIdentities]

help please!!! i want to buy this gun really bad but i dont know if i shud get the KWA for 300 dollars or the Classic Army for 270. They are the same gun just dif brand. SO WICH ONE SHUD I GET??????

[CQBRadio]

@TheSecretIdentities In my estimation, if you are going to spend around $300, KWA is the best you can get on the airsoft market. Go for KWA.

[MrDr143]

should i get this gun

[ApocalipsalMikey]

My KM4A1 RIS (same internals and externals except for a RIS and a crane stock) can hit targets with .25's at 200 feet. You sure yours doesn't hit further?

[CQBRadio]

@ApocalipsalMikey I'm pretty stringent with my tests. It can shoot further but I base it on a small target and often in a woodland setting (with branches, etc. around).

[callofdutystiker]

you can by this weapon with out the red part of the gun from

airsoftcenter.gr

[ApocalipsalMikey]

@callofdutystiker Hah cool, from Greece?

[Seanbbn]

for some reason i can't open this gun up the upper receiver won't separate from the lower and yes i removed the screw and pin

[Maxrock9]

I have a few questions for this gun

1. Can the front sight post be removed?

2. Is the fake gas tube needed for free float rail systems like a Noveske RIS?

Please respond because I could really use the help.

[CQBRadio]

@Maxrock9 Yes the post can be removed - it's a bit of work, but it can be done.

I am not sure if the gas tube is needed for a FFRS.

[hotman873]

what battery can fit in this gun? preferably from shortyusa. im looking for a 9.6v

[CQBRadio]

@hotman873 8.4 minis fit, a 9.6 butterfly does to. I haven't tried a 9.6 nunchuck, but I suspect that would work as well.

[Haktsu]

I forgot to mention that I have a KM4 S-system. At least, I think it's an s-system. The box has the picture of the gun you are reviewing but, mine comes with rails with an upper rail that goes from the forward sights down to the rear sights.

[Haktsu]

I am having trouble opening mine, is it a little stiff at first? Or is there something I forgot to remove?

[CQBRadio]

@Haktsu Did you pull out the body pin?

[Haktsu]

@CQBRadio Yes, I did. I managed to get slightly open but, it I can't seem to open it completely. But, it seems to stop by that point. This is my first time opening it just so you know.

[CQBRadio]

@Haktsu Interesting. Now compared to the shot of it opened in the vid, how far open does it come?

[Haktsu]

@CQBRadio It doesn't open nearly that far. It just opens as far as like a large crack, and seems to stop at that point. I have been trying to open it but it stops at the crack and doesn't open any further.

[MoneyManHolla]

the full 9 yards ?

[CQBRadio]

@MoneyManHolla Yeah - that works too.

[didsum1saymusic157]

Okay so. I am looking to upgrading airsoft gear again. Have a JG m4 s-system and i've loved it, but I want to upgrade to something more durable. I was looking at this gun, what do you recommend?

[CQBRadio]

Hey DidSum1 -

Yes, I would definitley recommend. I'd say that on the market now (in my opinion) KWA is the best brand out there. They have something similar to the M4 S-System. They'll run you closer to 350 or 400, but they are very, very well made.

[didsum1saymusic157]

@CQBRadio Okay, thank you very much. I actually don't like the way the s-systems rails are so bulky because i can literally ONLY use the rifle with a vert foregrip (not necessarially a bad thing, just a bit harder) and I have a lot of upgrades I'd like to do with the standard m4 carbine. Could we discuss external/internal upgrades in a private message? i'm somewhat new to the sport and would like some pointers.

[TinkyHitman]

depends if you have 100 bucks, or 400 bucks.

[Christianmarquez]

The New KWA Bodies don't say 5.56 on the barrel :(.

[lilchuckn0rris]

if you can pay for this. GET THIS! if you cannot, go with a JG for most guns or a CYMA for an AK-47/74

[c2thedub14]

i wouldnt get a high end gun until you know you like the sport. so yeah, a JG, CYMA, or even an SRC would be great for beginners.

[CQBRadio]

Just checked - yes you can - just tap the pin out and move the mount to the bottom.

[tomtomtom843]

Nice review! Looks like I've found myself another Airsoft Podcast to listen to aswell!

[jaredxxx24]

how far does the bb travel on the m4 before it hits the ground?

[CQBRadio]

Cant' say - I shot at a target at 125 feet and it was hitting that target without any drop at that point.

[jaredxxx24]

would you reccomend the kwa m4 or g36c

[CQBRadio]

Really depends on your preference. G36 is a German weapon originally, M4 is from the U.S. The quality of the M4 I can attest to - I'd check to see if they made mods in the G36 to make it as solid as the G36C. Airsoft Extreme sells both - you can call and ask them what they think about it as well - great customer service.

[jaredxxx24]

i prefer the style of the m4 but from what ive heard the the g36c has a smoother gearbox and is more accurate, and more reliable. what do you think?

[CQBRadio]

I haven't used the G36 but I've heard good things about it. However, if you like M4s, I'd recommend this one. I think in this price range (and in most price-ranges) this is the best M4 out there. Some may cost more, but as a base-product, this one is hard to beat.

[jaredxxx24]

is the sound of the gearbox smooth and what is the maximum range? also this gun accurate.

[CQBRadio]

I don't know how to explain the sound to you with words here - sounds fine to me.

It's accurate for a torso-sized target at 125 feet, perhaps a little more.

[Christianmarquez]

What people are saying is that the G36 has a version 3 gear box, which is stronger than the M4s Ver 2 gearboxes, but the KWA Gearbox is reinforced. Also, Accuracy comes from the Barrel and the hop up. I don't know about the G36, the the M4 comes with the 2GX hop up bucking(pretty good) and a stock TBB1.05+/- .03mm.

[bullmeatt]

@jaredxxx24 mine has a lipo and its shooting so fast you cant even hear the gearbox... all you hear is POP as soon as you pull the trigger. It is very accurate because it has a TB barrel.

[sk8er4life123456]

I have had the experience of owning both and honestly go with the M4 no joke. i sold my G36 check out my vids!

[Airsofthaven1]

just an fyi love your podcast i think your podcast will be the succesor to deadrag ( i wish they kept podcasting but what do ya do) kepp up the good work

[CQBRadio]

Thanks man.

[sk8er4life123456]

I have this gun but its totally different externally now check out my video (multicam loadout)! Good review!