Disassembly of the KSC GLOCK 18c PT1

[GardenGn0me666]

my safety switch fell out.... can you help?

[jcdezoysa]

it will be so funny if at the end he says 'shit i lost the small spring'

[skysnipe1]

this video is shit and you act like an arsehole i bet your a stuck up prick ....and you cannot dis-assemble this gun for fuck...turn it around put it in your mouth .switch off the safety pull the trigger ..and say goodbye to world of warcraft -_-

[MrDiegofigo]

Thank you so much for you videos! Without you and your help I would have had a non-working G18C for the rest of my life! And you are very fun too, thanks ;)

[qwerty123il]

Can anyone help me, My pin for the fire selector wont come out! Any ideas?

Thanks

[TheFr3sh1]

Wow what an ass hole. I know its tough being a lonely fat ass who has to take deep breaths just to stay alive, but have some compassion for the people who don't spend their lives taking apart GBB guns.

[hifatpeople]

still need help, the piston/ gas chamber doesnt go all the way back reguardless of lube, the slide stays back around a half an inch, and abou 2 mins ago it did that and vented the whole mag's gas out. only seems to happen on full auto.

[hifatpeople]

The slide on mine doesn't go all the way forward, the gas chamber (part with the rocket valve in it) gets stuck forward pretty much no matter how much u lube it. I suspect that the rubber part for the plunger thing somehow grew like the rubber piece on the recoil rod. WTF? Why is this happening? (P.S. this problem happened after disassembling the gun, but i am sure i put it together right.)

[hifatpeople]

Oh yeah, i couldn't fit this in my last comment, the rubber piece on the spring guide rod, a few days ago it just magically grew, now i have to squeeze it to make it fit when putting the top slide on. Any ideas as to why it got bigger? Any ideas on how to shrink it?

[StarskySTARS]

This guy seriously must have some demons. Retard. But he did a helpful disassembly and it worked fine with the sound turned off.

[51stnighthawks]

im tryin to reassembly my trigger assembly and theres a piece that i cant figure out where to fit it its the sear in in hammer assembly

[joeybyk]

thank you very much on your in-depth, step by step process of disassembly of a 23f. it saved me mucho dineros on gunsmithing fees....hoah.

[bolingersa]

Thumbs up if you watched this and muted the volume.

[MrAdessamama]

Why are so pissed at this video. Its as if your doing everyone a favor. And BTW who do you think makes this hobby evovle? The nuubs and if I'm not mistaken you were not. Born a pro.

[MrJohnhund]

CALM DOWN!

[MrJohnhund]

If you hate doing reviews, why dont you stop?

[Lg801901]

how did yhu color the tip black 

[TheKoodude7]

Thanks i reall really needed that..fuck these NOOBS!

[Kabar6Productions]

you love black things ? JK LOL :)

[ryan3551]

nice vid but calm down a bit

[JanHBuch]

Nice and very easily followed vid on how to disassemble a Glock 18c. One thing that spoiled my otherwise pleasant following of your hot-to guide was the frequent use of the word noob and the profanity you so liberally serve..

I don't think you yourself would enjoy that language if you were following the same vid.

[Chenipherc77]

you have problems but nice video

[TheXXxCouture]

Thanks man.. You great you help me out there.. Just one thing.. Damn you talk alot! And you say "Don't loose it" Luke a million times!:) and btw its looks really cool with the silver metal;D

[1lovesoni]

So what your saying is, if I lose anything other than the rear cover, Im SCREWED

[Escott3394]

my balls are nice

[LauCommentedOn]

"one" as in the little tiny metal ball inside the saftey pin.

[LauCommentedOn]

PLEASE tell me, what happens if i loose one? will i need to get another?

[cmpunk1975]

the silver barrell just looks sexy.. i dont know if i want to make mine silver or not.. may i ask should i?

[hifatpeople]

I have the jg glock 18, has a huge list of problems. Can you help me?

[AirsoftManJohn]

whats the problem

[xxMRGRENADExx]

@hifatpeople his first problem is its a JG....

[morrigoth]

You know what... really nice work on the disassembly, you helped me out a lot and I'm grateful for that.. but... man, STOP TALKING... just STOP :P !!

[exclusive011]

So if I don't want to take apart the blowback unit then I don't have to worry about the really small spring when I'm taking the blowback unit out of the slide?

[Prowler1]

buffoon

[FlamebaitV2]

i think it was a mistake to paint your barrel silver, it looks gross. GREAT DISSEMBLY THOUGH :)

[jimmycarter123456789]

hahahah what a fucking twat

[Sbairsoft]

what size allen key did you use?

[1003me]

its called a chill pill son

[marcusfishwinter]

lol he seems randomly pissed off with everyone! :P oh and btw u need a TINY allenkey, mine I cant even find one that fits!

[1234Mauiboy]

man still no answer well patience pays off so yah

[1234Mauiboy]

how do u get rid of the orange tip

[FlamebaitV2]

paint it over or use nail polish to clea it off

[hyphyazn510]

man you are sooo condesending

[MrDearrrr]

Good

[punkypink83]

great guide dude. it works for the 23F too. Can't wait for that metal slide to arrive soon

[gunsareforever]

hey what type of grit sand paper did you use to sand off the barrel and the other silver part?

[AirsoftManJohn]

i am not sure. i forgot sorry

[Sbairsoft]

you can use 60 grit

[JIMMYNGUYEN024]

what gas do you us ?

[AirsoftManJohn]

i use propane and hfc134a gas.i mainly use propane

[hooramarines]

dude dont insult your viewers

[hooramarines]

lol

[mnicsy999]

wont that break it?

[AirsoftManJohn]

the sight is plastic so maybe but that is the only way to get it off

[mnicsy999]

my kwa sight doesnt move

[AirsoftManJohn]

use a hammer to knock it off

[hooramarines]

your on fuckin crack

[4b501u73]

Couldn't agree more!:D

But somehow he still knows how to do it!!:P

[mnicsy999]

i can see it but i dont know what i am missing.. if you could..that kwa website,could you send me the link to what i might be missing

[AirsoftManJohn]

take the pin out of the gun then see if it is broken

[mnicsy999]

how do i know if anything is broken?

[AirsoftManJohn]

if anything is broken it should be very rough and have no black paint on it

[mnicsy999]

remember me? are u sure i am missing selector alignment pen? b cuz i want to fix my gun bad

[AirsoftManJohn]

can you see it in the back of your gun

[11211220]

how do you make an account

[AirsoftManJohn]

you go to redwolf homepage and on the left there should be 2 yellow words.one of the words should be register.click that word and then just fill in your info.

[11211220]

where did you get the glock

[AirsoftManJohn]

redwolf airsoft

[mnicsy999]

yes i do

[AirsoftManJohn]

you can get that part from kwausa(dot)com

[mnicsy999]

my rear site doesnt move

[mnicsy999]

how would i get that pin that you need to tightnen up bcuz i think im missing it.and i have the kwa.

[AirsoftManJohn]

do you mean the screw under the rear sight

[brizzi321]

does the screw and the pin come loose just from firing the gun?

[AirsoftManJohn]

yes but it is an easy fix

[gunmaster2448]

i sanded my barrel the cycle feels a little different is it suppose to

[AirsoftManJohn]

"how" different

[gunmaster2448]

u can tell when you press the slide lock forward it kinda slow

[acealexh]

good video, but ur voice is so awkward!

[AirsoftManJohn]

my camera sucks

[monolinkster]

good, that what im looking for.thx dude..

[lolloz1010]

nice vid but sound seriuos

[lildd86]

Nice Vid.

Keep on goin'