Bedini Patent Animated ver. 1.0

[jr81472]

IF THE 20TH CENTURY TAUGHT US ANYTHING, IT IS TO BE CAUTIOUS ABOUT THE WORD "Impossible"

Bedini/Muller/bob teal/lindemann etc combined - with all the $ and time I spent already, I successfully made one that is running by it self non stop for a couple of weeks now, friend laugh when I show them, its miniature like a toy, but there is no extra power output but its nice to look at still running ;-) mmmmhhh MORE! MORE! lol

if we know what we are doing we wouldn't call it a research - Einstein

[KBendix]

For those who are skeptic.

No one says, that these things makes energy out of nothing. There is very good theory about external power sources, such as - solar wind and other particles from sun and/or other stars, galaxies and aether or in some theories it is energy from gravity. And don't say, that it could not be from gravity... it is scientists, who says, that they are sill researching gravity.

[cambriacity]

what makes the motor go?

[MAllen7424]

@cambriacity This motor is an attraction motor (magnets are attracted to the Iron Core) as the Magnet passes the trigger it lets current flow via transistor to the transformer (electro-magnet) and cancels out the magnetic attraction and the magnet passes by with no drag. Of course tuning it differently it becomes both attraction and repulsive. So it is all how you tune it. You can find more Lay-man explanations on my website.

[orbitalreign]

understand the simple laws of physics and you ill understand your always going to use more energy than you get and even at best you will only get back what you put in and nothing more. thats just a complicated way of wasting energy.

sorry to be the wet blanket on your idea.

[MAllen7424]

@orbitalreign not my idea to get wet about, so your posting on the wrong channel.

[nikolayzou]

@orbitalreign The universe is full of energy and atomic matter on contributes to 5%. Over unity does exist and there are plenty of credible experiments that prove it. Not sure if this one produces over unity.

Don't always believe what you read in a science books, science has been wrong before and it has no understanding what contributes to 95% of all the energy in the Universe. Science still doesn't understand the true nature of gravity, only the effects of it.

[johnnytheprick]

@orbitalreign have you tried to prove otherwise, or are you just regurgitating what your lecturer said?

[H0B0J03]

@orbitalreign well then, what if you were to make motor based on magnetic repulsion using fixed magnets, what then? free energy no? no pesky electromagnets to waste energy

[psibyrion]

@orbitalreign you are not accounting for subatomic field interaction

[thinkrealify]

My grandfather was a machinist. He told me that when he was young 1930s(or so) people in this rural Ohio area used to charge batteries with windmills . Good animation.

[Mapanatl]

Hi MAllen. I visited your website and I could see your animation better specially at the slowest rate.

You have some mistakes in the animation as to HOW the circuit works.

also I believe the isolation via OPTO may not be necessary.

and the 555 timer may also not be necessary. In fact the 555 may be impeding maximum efficiency by not allowing the maximum oscillation rate possible.

since the 555 is simply "guessing" when it's time to fire the Opto.

but I'll wait for your response.

[MAllen7424]

@Mapanatl hello i always respect the opinions of others, especially in freeing ourselves from the energy cartels. I have made this animation based on someones patent. Everyone in the alternative energy forums would like to know how to free themselves from the grasps of the antichrist. So if you think you have the answers, please share them with all the people of the world so we can all get this right the first time around. If there are mistakes in this animation, please explain it here!

[Mapanatl]

@MAllen7424 Hi.

Well, correcting your interpretation of HOW the circuit works is not going to change it's function unless you change components or circuit. but it will help you understand the circuit better. IDK if this is Bedini's circuit.

But - and SCR is a Diode that does NOT conduct in any direction until triggered. a mere pulse can turn it on. but once ON it will NOT turn off Until you disconnect or there is no more current(runs out of power) then goes dormant again.

[Mapanatl]

@Mapanatl CONT.

While ON the SCR will act as standard Rectifier.

according to your anim. the capacitor begins to charge and the Batteries begin to charge.

when 555 fires the OPTO, pulses the Transistor which turns the SCR and charging STOPS.

ACTUALLY when CAP charges; rest of those components remain OFF. When the 555 "thinks" the Cap is charged then times out, fires the OPTO, opto Turns ON Trans, then SCR and the the CAP discharges the load into the BATTs. then cycle repeats.

[Mapanatl]

@Mapanatl  CONT 2

In order to properly Charge the BATT the V. must be at least 14.7V

beyond 15 the batt will be in an overcharge condition if the system is unattended. (damaging the batts, reducing life) But a 555 timer is only guessing When that Point happens so you could be Undervoltage and never really charging batts (wasted time. no benefit. or Overcharging, reducing life. Also Wasting time since timer could be firing many times sooner improving efficiency & preventing Damage to batts.)

[Mapanatl]

@Mapanatl CONT3

So a Timer is Probably not the right thing to monitor the charging cycles.

and OPTO may not be necessary the 2 systems can probably have common Ground.

Up Step and Down step flyback converters have common grounds. This is sort of the same except that here SUPPOSEDLY the plan is to charge 2 Batts of EQUAL V for the Price of One. due to the Oscillating magnets.

Also the Trans is NOT needed and the SCR I am not sure it is actually turning OFF after discharge.

it may be ON

[MAllen7424]

@Mapanatl ...And also, you are correct, you can use a mechanical switch(commutator), hall sensor or reed switch or even a micro-controller to control the timing of the discharge. Its all how you design it leaving you a road of endless possibilities.

[GuitarLucius]

Nice work. My buddy just turned me on to this circuit so I figured I better learn a bit more about it. Cheers, Lucius

[MAllen7424]

@GuitarLucius Well I spent alot of time to understand this circuit myself in a visual way by making this animation. my goal was to help everyone understand it in a visual way to advance and spread the knowledge of this circuit to everyone, I spent three months (lots of hours) making this animation. My progress was slow because lack of understanding, I hope my research helps you get ahead on your project faster. Be sure to see my website for more helpful reading.

[proff128]

whats the reason for this circuit? I can understand how it works but to get a charge for the batteries you still need to turn a motor so to do that your using current

[MAllen7424]

@proff128 Since when do you need "current only" to turn a rotor? Are static and pulse motors not supposed to work? Should I re-evaluate how this motor I have built turns?

[MAllen7424]

@proff128 to answer that question the magnet attracts to the iron core(transformer) in this schematic and then the charged magnetic field cancels out the magnetic attraction of the iron and the magnet, which in turn the magnet passes by the iron core with no attraction then the magnetic field collapses and by then the next magnet will be attracted to the iron core for the next cycle.

[DilJalaay]

Thank you very much. Nice teaching.

Regs,

[k7iq]

THis is great !! What's it for ?

[ZincFold]

Hi MAllen, Something you missed was the magnets N field. I believe thats where the over unity comes from. When synced properly the running coils see a stronger N field collapsing then the one it created thus a greater spike. The leaving N field of the magnets must be in sync with the collapsing N field of the running coil. Law of conservation will make sure the S field is equal to the N field. This is why the magnets are important. At self oscillation you just end up with a type of Joule Thief.

[kdaveem]

When you reach a point where you can remove the batteries please let me know.

[joebriffa60]

Hi my friend

It's so good to experiment, but I am only using just one hall effect IC and a transistor to turn my motors but don't ever think that you will get an output greater than the input and leads to perpetual motion ,,, In my opinion it can never be done.

still I like those who experiment. it's fun.

[menthorul]

hi, where do i find this schematics ? as a circuit matter.. ? cause i'm interested..thanks

[hymachowdary1]

@menthorul

[buckstarchaser]

Hahaha, I'm searching around on google for this Bedini guy to find out what all the hubub is about and all I get are youtube vids of people thinking they are getting free energy from mag field collapse. As for this schematic, he's losing so much power from silicon junctions and over complexity. Three batteries? come on! SCR's and optoisolators tend to invent reasons for their use but an LM555 here is a clear sign of someone who hasn't developed the skill to design a self-starting ocilator.

[ayshortier]

Put it on my skateboard

[MAllen7424]

nice

[the26thhour]

Cheers for the upload. Do you think we can see this in high res, cause I can't read a thing?

[weeeendog]

I'll be nice . . .

Guess what! You have not yet arrived in the field of EE

ok job with the animated graphics . . .

[dodoshlodo]

hey nice 1, which of his patents was this one?

Thanks for the upload, 5 stars 4 u