LOL damn dude thats pretty sick did u make that ramp if so nice work looks good ill attempt a back when i get bigger tires and bigger batts mines still pretty much stock
thanx yea me and my dad made it, haha sweet with lipo it should be ez, here i had big masher 2000's on it i have geolandars on it now its harder to backflip but i still can lol
im running integy piggy back shocks so they dont have the plastic pre load spacers. it has a vxl motor and a sidewinder esc. most of the suspension parts have been changed to make it stronger.
sweet! the ramp came out awesome! like the 7ft ladder lol, nice backflips! looks like for experts only, hahah, bet u could backflip it over that suburban,*****
does it got vxl system in it or what?
rustlerbadass 2 years ago
velineon motor sidewinder esc
TractorKid7 2 years ago
k ty does the sidewinder esc make it go faster than vxl 1? cause I can't even do a backflip with my 7 cell in vxl
rustlerbadass 2 years ago
i didnt even notice a difference in between the 2. what 7 cell do u have and what is ur gearing/tires and what kind of ramp r u going off of?
TractorKid7 2 years ago
i got a maxamps 7 cell I had it geared 23/90 with stock tires when i tired a backflip off like a 1 and a half foot ramp.. it was pretty crappy tho
rustlerbadass 2 years ago
you need a big, steep ramp to backflip unless ur on 3s
TractorKid7 2 years ago
kk ty
rustlerbadass 2 years ago
thats how you jump a rusty big time i love the video!!!!
venommotor123 3 years ago
thanx!
TractorKid7 3 years ago
sweet video! u need to get one with a rollcage thatd be sweet lol
fenderguitarist05 3 years ago
thanx they do make em theyre expensive tho lol
TractorKid7 3 years ago
sweeeeet like the new ramp sam that should be good for a few new vids ha ha *****
marcmyster 3 years ago
thanx yea lol it breaks a lot of parts lol
TractorKid7 3 years ago
i could almost bet that if u just put the geolanders in the back and the Mashers in the front u would back flip much easier
1bandito8 3 years ago
y lol, now that i have geos its much harder to backflip
TractorKid7 3 years ago
i ment to say geolandes in the front and mashers in the back.
P.S do u have any stock electronics.
1bandito8 3 years ago
oh lol yea probably. no i dont lol
TractorKid7 3 years ago
i dont have any stock electronics ether because i just got a futba recever, tranmiter, and servo.
1bandito8 3 years ago
nice, well the rx is like stock but it isnt actually stock lol and the tx is stock
TractorKid7 3 years ago
LOL damn dude thats pretty sick did u make that ramp if so nice work looks good ill attempt a back when i get bigger tires and bigger batts mines still pretty much stock
insycosaneman 3 years ago 2
thanx yea me and my dad made it, haha sweet with lipo it should be ez, here i had big masher 2000's on it i have geolandars on it now its harder to backflip but i still can lol
TractorKid7 3 years ago
i love traxxas to, i have a revo and i broke it and have to fix it. ps by JUMPING
camaroboy95 3 years ago
lol cool, haha yea i break my rusty a lot good thing theyre fun to work on
TractorKid7 3 years ago
faved 5 times! wow ur gonna have alot of comments when u get back!
95666 3 years ago
sweet lol, i didnt have as many as i was expecting lol.
TractorKid7 3 years ago
hmm, thought u would have like 30 lol
95666 3 years ago
there was only like 10 lol but there was like 40 vids that were uploaded from my subscriptions lol
TractorKid7 3 years ago
oh, wow, yeah i guess there was some new vids.
95666 3 years ago
lol yea nothing too amazing exept for the spark-bar was awesome
TractorKid7 3 years ago
yeah it was/is.
95666 3 years ago
did you put any spring adjuster on your shock? is your rustler VXL? what else did you add in to make it tougher?
pinoybakulaw 3 years ago
im running integy piggy back shocks so they dont have the plastic pre load spacers. it has a vxl motor and a sidewinder esc. most of the suspension parts have been changed to make it stronger.
TractorKid7 3 years ago
#64 - Most Discussed (This Week) - Autos & Vehicles
95666 3 years ago
wow lol still an honor
TractorKid7 3 years ago
yep!
95666 3 years ago
why do you alway get legacy bodes? i am getting the desert rat from pro line.
1bandito8 3 years ago
cuz i can get them cheap, nice i love that lid
TractorKid7 3 years ago
i thought that u had a 7 cell?
1bandito8 3 years ago
i did but the top cell on it died so i just cut the wires that were attached to it off and soldered them together and made it a 6 cell
TractorKid7 3 years ago
hehe, funny tk7 broke his battery how much speed did you lose.
1bandito8 3 years ago
not much, like 5-10 mph
TractorKid7 3 years ago
TK7 thats a very "Pro-Built" looking ramp + awesum backflips! ***** ^_^
ManuelDr 3 years ago
thanx!
TractorKid7 3 years ago
hell yea
ManuelDr 3 years ago
You know there's something called throttle control!LOL
Porsche917LH 3 years ago
yes, thats y it was backflipping lol
TractorKid7 3 years ago
Nice ramp TK, looks like lots of truck repairs are in your future! lol! ramps are always the death of our toyz! lol
jjmazee 3 years ago
thanx, yep lol it sux but its fun!
TractorKid7 3 years ago
sweet ramp, and jumps :D
trxmh 3 years ago 2
thanx!
TractorKid7 3 years ago
Nicely built ramp! You were stickin those landings like a pro towards the end.
ratrodjon56 3 years ago 3
thanx yea its rlly ez to backflip off of this ramp lol
TractorKid7 3 years ago
that was pretty awsome! did u design tha ramp? you have those flips sorted!
similian0 3 years ago 2
sweet ramp, any chance of some prints?
did u break anything?
sweet jumps, its hard to backflip a 2wd
fathead431 3 years ago 2
did you add the top plywood piece covering the 2x4? or was that in the plans? i thought i saw an opening there, u should paint it!
95666 3 years ago 2
lol no that was in the plans u have to have it on there or how will the car jump it lol, yea i probably will
TractorKid7 3 years ago
hahahaa, yeah u kinda need the main board for it to go up lol, i meant the small rectangle on the very top part.:D
95666 3 years ago 2
ohh lol no i didnt add it i guess i built it different from the plans
TractorKid7 3 years ago
oh! i think i seen the bulkhead break at 0:53 lol
95666 3 years ago 2
yep lol or that was the shock end idk which
TractorKid7 3 years ago
yeah looked like the front wheel was all messed, maybe it was the shock end, that sucks bending those shafts, can u straighten it?
95666 3 years ago 2
yea i already did lol
TractorKid7 3 years ago
everyone needs aluminum 7 ft A ladders to jump over! hahah
95666 3 years ago 2
yep! haha theyre pretty sweet
TractorKid7 3 years ago
cool backflips!
Blondencrazee 3 years ago 3
thanx!
TractorKid7 3 years ago
#79 - Top Favorites (Today) - Autos & Vehicles
#98 - Top Rated (Today) - Autos & Vehicles nice on the favorites!
95666 3 years ago 3
sweet!
TractorKid7 3 years ago
#46 - Top Favorites (Today) - Autos & Vehicles
#37 - Top Rated (Today) - Autos & Vehicles wow that jumped up fast.
95666 3 years ago 2
haha sweet!
TractorKid7 3 years ago
sweet! the ramp came out awesome! like the 7ft ladder lol, nice backflips! looks like for experts only, hahah, bet u could backflip it over that suburban,*****
95666 3 years ago 3
thanx yea it did yep lol im such an expert lol. yea i probably could lol.
TractorKid7 3 years ago
maybe u should try! hahahh, ahhh, what if it went off to the side or something, crash! broken window. maybe not.
95666 3 years ago 2
haha that would suck!
TractorKid7 3 years ago
hah thats awesome! big ramp too! 5/5
fenderguitarist05 3 years ago 4
thanx!
TractorKid7 3 years ago
Nice ramp! Lookks the one on big squid rc.
Porsche917LH 3 years ago 3
thanx ive never seen the one in big squid rc.
TractorKid7 3 years ago
holy crap whered you get that ramp
pntballkid95 3 years ago 3
me and my dad built it
TractorKid7 3 years ago
nice 5/5
c6corvettekid13 3 years ago 3
thanx!
TractorKid7 3 years ago