the cage is to allow a 4 wheeler that is wider than the width between wheel wells. it moves the cg of the vehicle up {less stable}. there are much simpler solutions to your problems than this monstrosity.
Hm that ramp looks sketchy. Makes the angle alot steeper than it needs to be. What's the point in the cage? To store stuff underneath it? It's almost not worth it.. It puts the ATV above the protection of the bed walls and it just looks overall pointless.
The cage is most likely to keep it stable buddy, unlike those shitty ramps that you tie onto the tailgate. I can't see that thing ever failing, though it'd suck to store somewhere when it's not in your truck.
As for people say "fuck that, drop it out", that works, but not to get it in. I do the same thing with my EX but there isn't always a convenient hill/mound/ditch I can back the truck up to and pop the quad into the back.
Really, thanks again. I think if you viewed all my videos concerning this system you may have a better view point. Have a great day and thanks for your comments and/or corrections (spelling).
This was designed to allow the big ATV's and UTV,s to load or unload from a bed of a pick up. If you look at your trucks tail gate, it was never designed to handle weight as I mentioned. Also, I can load the largest ATV made, faster and safer then any other method, including YOURS!
ok here we go.. first wow much does yours cost. mine was 70 bucks. i can load quads, full sized utilities, and mini excavators. and look how much fuckin room that takes up. if it bolted down to your bed, the bed is useless you cant put anything else in there. you might as well get a trailor. ok i give your credit bout the tractor driving on it.. but its totally non versatile for atv purposes
I really don't think you understand. This was to replace trailers. It does not need tags, insurance no flat tires or brakes to repair and I can manuver through city streets tight wood pathways. I can put a full size bed tool box inside the bed and I can load vehicles with 50 inch plus wheel base and I can install and uninstall the system in less than 10 minutes, thats including loading and loading a large ATV/UTV mower or golf cart. All this w/out touching the tail gate. Price a new tail gate.
Since you tube will not allow me to put my web site in this the typical way I have to expalin my address this way. Type in the 3 small w's followed by a period, then type in grizzlycage then a period and finally type in com
This site shows how the system works. Thanks for your question.
@jwayne1961 You realize if you put the full address with the h the tt and p: with a // in the video DESCRIPTION it will make the link clickable in the description area to the right. You will get a lot more traffic if you make it this way than you will with the way you have it now. Use the full URL in the description, but in COMMENTS you can NOT use it like this. Hope that helps you some. Good luck, I'm sure there's a market for your contraption!
takes up too much room, where do i store the moose ?
MrBossilini 7 months ago
why so many dislikes...he made a perfect touchdown
Catalin0620Romania 8 months ago
@Catalin0620Romania because they want a crash lol
TheSupersample 8 months ago
That sure as hell is not a Quad Runner
SSduckclub 9 months ago
put it in neutral and coast down using your brakes to control your descent.
smallville9631 9 months ago
what happens if you dont have reverse
david19952007 9 months ago
It is now a fighting website for cage matchs lol. Must have been a dud.
BIGORANGEHUNTER 11 months ago
wow i am very proud of you you unloaded a fucking qaud!!!!!! (clap clap )
MrHarnish01 11 months ago
AMAZING! Excellent work!! Would like to see how you go up the cage !
scarax146 1 year ago
oh my gosh you frickkin did it!
MALamborghini 1 year ago
I thought you going to fall.. not cool video lol
cata893 1 year ago
Its got suspension for unloading yank that bitch outta the truck lol for loading wheelie it in there and then pick the back end up lmao...
tessaro1 1 year ago
this video was so boring the vuvuzelas made it more entertaining
LBKRS 1 year ago
why not just buy normal ramps?
theboredredneck 1 year ago 2
I think I'll just keep driving over the wheel wells in my truck.
bennpapa 2 years ago
Nice job unloading.. It helps me out so much hahahah
MrJellis2010 2 years ago
the cage is to allow a 4 wheeler that is wider than the width between wheel wells. it moves the cg of the vehicle up {less stable}. there are much simpler solutions to your problems than this monstrosity.
Duckyistrippin 2 years ago 4
stupid video
vik94ibz 2 years ago 28
its a 4 wheeler not a quad runner
marsh1998 2 years ago
quite frankly it is a quad runner its wat suzuki calls it
hellshot00 2 years ago
no. the quad in this video is a quad racer. i have a quadrunner 300. its a utility 4wheeler
mattschmit1 2 years ago
i thin if you get it out there it will sell easily
froggyman222 2 years ago
This has been flagged as spam show
so whats the big deal
motoracer56 2 years ago
Que habilidad! (sarcasmo)
eeeee96 3 years ago
Hm that ramp looks sketchy. Makes the angle alot steeper than it needs to be. What's the point in the cage? To store stuff underneath it? It's almost not worth it.. It puts the ATV above the protection of the bed walls and it just looks overall pointless.
KLoughreyProductions 3 years ago
The cage is most likely to keep it stable buddy, unlike those shitty ramps that you tie onto the tailgate. I can't see that thing ever failing, though it'd suck to store somewhere when it's not in your truck.
As for people say "fuck that, drop it out", that works, but not to get it in. I do the same thing with my EX but there isn't always a convenient hill/mound/ditch I can back the truck up to and pop the quad into the back.
launchpaad88 3 years ago
i think the cage is to keep the bike off the fenders making it easy to load/unload
dbardos 2 years ago
i push my raptor out of a tundra on 24 no ramp
kingsec08 3 years ago
Fuck that just push it out. Im sure the suspension could handle it
blasterboy1467 3 years ago
lol pop the clutch wheelie ramp it out
smithers262 2 years ago
Thanks. I found going down or up on the ramp is very stable.
jwayne1961 3 years ago
wtf man i thought it was going to flip or something man oh well nice ramp though
hangabuga 3 years ago
Thank you. It suprised me on how well it handled large heavy ATV's and UTV's
jwayne1961 3 years ago
good ramp
bestamerica 3 years ago
ok?
ilcilp 3 years ago
Really, thanks again. I think if you viewed all my videos concerning this system you may have a better view point. Have a great day and thanks for your comments and/or corrections (spelling).
jwayne1961 3 years ago
Yes I can. Thanks for the life advise.
jwayne1961 3 years ago
All you need it ramps, this is basically the same except holds the quad up in the air about 4in.... for what?, nothing.
twincat800 3 years ago
id say 8 inches.
vortex812 3 years ago
hah yeah, ur definantly closer
twincat800 3 years ago
I agree its stupid, plain old ramps or a ditch/incline will work.
teamhex 3 years ago
that would be tough to do drunk so its not for me
6666Trailboss250 3 years ago 40
will you people PLEASE stop leaving bad comments on stuff like this!
ResidentxEvilxFan 3 years ago
okay wtf thats just stupid. who need that shit. if your gonna hall something big just get a trailer.
hondariderzach 3 years ago
or you could just lift up the front of the atv, then squat the backend up like a big boy
millertime60 3 years ago
This was designed to allow the big ATV's and UTV,s to load or unload from a bed of a pick up. If you look at your trucks tail gate, it was never designed to handle weight as I mentioned. Also, I can load the largest ATV made, faster and safer then any other method, including YOURS!
jwayne1961 3 years ago
ok here we go.. first wow much does yours cost. mine was 70 bucks. i can load quads, full sized utilities, and mini excavators. and look how much fuckin room that takes up. if it bolted down to your bed, the bed is useless you cant put anything else in there. you might as well get a trailor. ok i give your credit bout the tractor driving on it.. but its totally non versatile for atv purposes
millertime60 3 years ago
I really don't think you understand. This was to replace trailers. It does not need tags, insurance no flat tires or brakes to repair and I can manuver through city streets tight wood pathways. I can put a full size bed tool box inside the bed and I can load vehicles with 50 inch plus wheel base and I can install and uninstall the system in less than 10 minutes, thats including loading and loading a large ATV/UTV mower or golf cart. All this w/out touching the tail gate. Price a new tail gate.
jwayne1961 3 years ago
where do you put the ramps during transit?
dandridge19 3 years ago
Since you tube will not allow me to put my web site in this the typical way I have to expalin my address this way. Type in the 3 small w's followed by a period, then type in grizzlycage then a period and finally type in com
This site shows how the system works. Thanks for your question.
jwayne1961 3 years ago
@jwayne1961 You realize if you put the full address with the h the tt and p: with a // in the video DESCRIPTION it will make the link clickable in the description area to the right. You will get a lot more traffic if you make it this way than you will with the way you have it now. Use the full URL in the description, but in COMMENTS you can NOT use it like this. Hope that helps you some. Good luck, I'm sure there's a market for your contraption!
RealOathKeepers 2 years ago