My home built 3 axis cnc router. Test run

[eugnret]

I posted a vid of my 2nd router, check out my other videos.

As I have had many requests for plans & parts, I set up a website where people will be able to buy several different DIY kits of my latest machine. I decided against selling the plans, sorry :(

[Cncquest]

@eugnret,

I dream at night of this Mashine :-). Can you say when you can sale the plans and how much it will be?

[eugnret]

Thank you, it took a lot of thought to design it.

LOL, it does look like it's moving to the tune, but it was just a coincidence

[MACHINEIRON]

Very nice CNC router. It looks very professionally built, in fact it is so good you probably should make kits and sell them.

Was the router really dancing to the tune of the music?

[eugnret]

It's not a secret - I'm using skate bearings. If you read the comments in my other videos, you will find more answers re. linear motion and drivers on this 1st table.

I've almost finished my 3rd table with a work area of 2440x1220mm. I have used the same bearing setup, but am trying out T5 belt as I couldn't get enough chain. I'm hoping the belt will work well.....I'll post some vids when it's running.

[ankval73]

Thank you for your reply!

If not a secret, you are using bearings of the axes X and Y?

I am very impressed with your machine, here in Russia I have not seen such a mechanics. Great.

[eugnret]

My accuracy is no worse than if I used rack & pinion or ball screws. If anything, it is better, as there is no backlash when using chain.

The repeatability is perfect. If I machine a sheet of HDPE in 3 passes, you cannot see any of the passes, it looks like it was done in one go.

[ankval73]

Hello

What positional accuracy do you have on your machine.

I understand submission of the axes X and Y through your chain?

[eugnret]

Please do not email me asking for plans. I said I will think about it, and I will.

I have hundreds of hours invested in these drawings. IF I do decide to release them, they will be sold, not emailed for free.

[Cncquest]

@eugnret, wonderfull, to get this steel here is no problem. To get the cutting steel parts is here very easy. It will be amazing to build your mashine :-)

[xchvcwryb]

Instant thumbsdown for the noise.

[eugnret]

OK, I'll think about it. I will need a few days to clean them up so everyone will understand them. I have all the drawings as well as a list of materials.

This machine was designed around 100x50mm (4"x2") cold rolled rectangle tube for the rails. If you can source this locally, you should be able to build it.The table can be built out of anything you like, as long as it's braced correctly.

[Cncquest]

Helle,

this is the very very nice mashine! I would to build a mashine like this. Cann i buy your plans of this or your new mashine?

[Crazcompart]

The now defunct Hitachi-Seiki vertical CNC machining centers worked a bit like the configuration you have...The difference was that the table moved in Y (front and back), while the spindle moved up and down (Z) and left and right (X)...

[algerianotomatch]

very nice job man

can you say what is the name of this very nice song

[Thundergras]

I'm really sorry, but with that music, i HAVE TO click on "dislike" button ! Good video btw.

[eugnret]

Check out my other vids & read the comments. I've answered some questions re. stepper size, driver, etc.

[hendiksau]

Very nice!!! I know that you have done a lot of work for that but can you mail me some details wich steppers you used to polkop@live.be and maby some drawings. Thaks you very very much

[sandrobenenaula]

hey...congratulations...please can you send me the plans?

your desing is great...i want tu build a machine like your design...

mi email..is....napomolina@hotmai­l.com Thanks....!!!!

[eugnret]

This machine was designed & built primarily to machine holes in chipboard for cabinet construction. It was able to machine MDF, but I found it was a bit weak to machine hardwood/aluminium unless it was done in many passes. I built another machine and made some changes. The new one is much more powerful with a 2.2Kw spindle, floating foot dust extraction & vacuum hold down. It can handle all timbers, plastics and aluminium.

[LR634x]

@eugnret can you make a video from your new maschine, please?

[emptyfoo]

Can you machine aluminium/hard wood with this cnc machine ?

[MultiRosino]

de uma olhada no google e me fala Kit Para Montar Sua Router Não Perca Esta Oportunidade.

[MultiRosino]

Kit Para Montar Sua Router Não Perca Esta Oportunidade.

[MultiRosino]

vc vende qual o preço

[RaLxMar]

gostei muito eu teria como fazer uma vc tem os projetos pode me passar obrigado

[heliprotectioneurope]

Hi, this is a gorgeus Job

Could You share the drawing/project ? I should like to make another one like This

[emptyfoo]

Really nice, would you mind to share your design/draw ?

Upload more videos :)

[eugnret]

Thank you

[irishkendoll]

THAT turned out very nice! CLEAN! great job!