Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (17)

Sign In or Sign Up now to post a comment!
  • Check out my tube for all ur audio problems ur radio didn't turn on check all fuse user hood and inside the car - test ur power wires thir is only 2 the constant battery and acc switch the battery wire will always have current while the acc wire will only have power when u switch on into ignition

  • I have an 05 Wk where sis you get the piece to hide the circles so I don't have to buy a navigation bezel

  • ive got the same stereo but in a 2006 dodge dekota will this way still work because its pretty much the same setup

  • i got a 07 laredo and i think i mightve shorted something when trying to install the new radio.. not sure if i blew a fuse (i checked them, they all look pretty decent) when i tried to put back th original radio it didnt work. any suggestions? I had the wiring for thee wiring harness checked and that was right. i had the keys in the ignition, and the neg battery was not uplugged. Thanks.

  • @growlerbro12 - If you have a Multimeter, I would suggest testing power at the plug. You should be getting 12 volts constant power on two wires in your harness. Both wires are the same color, I believe they are red with an orange tracer. If there is no power on either of those wires, you most likely have a blown fuse. If there is power, you could have done damage to your CAN Bus network (Lets hope thats not the case).

  • @growlerbro12 Did u ever get this resolved? I just ran into the EXACT same problem. I tryed changing the radio, didnt want to work with new radio. During wiring a wire touched another and sparked (nothing big and i separated the wires real quick). As it started to get dark i thought i would wait till tomorrow so i put the factory radio back in. Now that radio doesnt turn on. I checked all fuses and they all seem fine. So now i don't know what to do.

  • @growlerbro12 FYI on my last post. I have a 2007 Jeep Grand Cherokee Laredo too.

  • i got a 07 laredo and i think i mightve shorted something when trying to install the new radio.. not sure if i blew a fuse (i checked them, they all look pretty decent) when i tried to put back th original radio it didnt work. any suggestions? i had the keys in the ignition, and the neg battery was not uplugged. Thanks.

  • Oo ok thanks i ask bcuz i got a 05 laredo without boston acoustic but i order a scosche cr03sr and the antenna adapter but i dont know if is wonna work but thanks for.your help

  • @elkngry - The cr03sr should work great for your vehicle.

  • Hi do u have any problem with yhe computer or can bus sistem agter u install it like that

  • @elkngry - No problems with factory computer or CAN Bus. This does not work for systems that are factory amplified, you must use an adapter, or bypass amp.

  • @stylerwilson1 what is a ca bus

  • @paul121456 what is a can bus please email me at paul2456@Aol.com

  • Dash bezel make the whole thing look mickey mouse

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more