Building a Reaver Titan Part 2

[fluffygolfer123]

how much does the average Reaver Titan cost?

[TemplarsCrusade01]

@fluffygolfer123 check out the forge world site under Titans, as there are different weapons and so on which change the price. ; )

[Rapter215]

@TemplarsCrusade01 the reavers are about £610 with about three additional weapons

[The69ningchipmunks]

hey again, i have ordered it it should be coming in next week i think, im really worried about pinning the model because i heard if you dont pin it in certain areas the upper body will brake through the torso because of the weight is that true? any advice on pinning it?

[The69ningchipmunks]

hey, cud i please ask you a question? i want 1 is it worth getting? for about £560? because i dont want to have to save up for 7 months and get a bad model.

[TemplarsCrusade01]

@The69ningchipmunks Its probably one of the best models at forgeworld if you ask me, I have two and would quite happly buy two more if I was allowed lol Be warned though, dont rush it, take your time and enjoy the build, always prep your models and enjoy it ; )

[The69ningchipmunks]

@TemplarsCrusade01 thank you sooo much, ive already started saving love everything from forgeworld but this is definatley going to be the most INSANE model i have any other advice on assembly

[The69ningchipmunks]

@TemplarsCrusade01 hey how are you doing? how are your titans? i asked if it was worth the money about a month ago! and i finally got it and have assembled it and anyone who wants one definatley get it its an awesome model and you can never go wrong with a titan or two in your army or just to keep on your desk!



[tkhushrenada]

what do you use for the pinning? (rod/wire?) and is a regular GW drill enough? thank you

[TemplarsCrusade01]

@tkhushrenada i use paper clips, they are nice and strong and I tend to use two or three on the larger joints. Hope that helps ; )

[tkhushrenada]

@TemplarsCrusade01

that's brilliant! Cheers. About to build my first warhound so a bit daunted O.o =D

[Shiznaft1]

I love these models. I wish I could justify the expense. 8^) Thanks for posting the videos. It is a pleasure to see all the little bits in detail.

[TemplarsCrusade01]

@Shiznaft1 lol same as buddy, they are actually some of the best casts from forge world I've seen ; )

[Harbaugh87]

When you are done with the big battle, feel free to send me one. ;)

[TemplarsCrusade01]

@Harbaugh87 if it hasent been smashed up if we loose, i'll consider it lol

[warhammer40kRJ]

sweet i lv titans mainly the one u r working on

[TemplarsCrusade01]

@warhammer40kRJ lovely models 

[DEMONJESTERJ]

Grate work on your videos. Thank you for all your hard work. Keep it Cool and Real Peace!

[TemplarsCrusade01]

@DEMONJESTERJ cheers matey

[NavyRadman]

that monster is coming along nicely!!

[TemplarsCrusade01]

@NavyRadman its getting there lol

[WGConsortium]

Incredible work man!

[TemplarsCrusade01]

@WGConsortium Cheers buddy, as I said in the vid, they are wonderful to build, really lovely ;)

[FiveStarRating22]

Love thesee things. Thanks for sharing. I hope to get a titan someday pretty soon

[TemplarsCrusade01]

@FiveStarRating22 The Reaver titans, hell all the titan models are fantastic to make, you'll really enjoy building them.

[ooftaZone]

If I seen those three on the gaming table. I be..."yep...good game" and start packing up. : P

[TemplarsCrusade01]

@ooftaZone lol yeah I get your point ;)

[MarneusAugustaCalgar]

Superb bud, pressure is on now mate.

[vanhammer73]

great job, no glue runoff and clean going to make the paint go on smooth,,, airbrushing or ol'school pot and brush? like i said earler im going to like this build ;)

[TemplarsCrusade01]

@vanhammer73 All old school matey, not an airbrush man I'm afraid, I enjoy the satisfaction the brush technique brings lol

[darktitan01]

Sweet!

[LOXMYTHIC]

Lookin good. Are you going to build any Imperators or warhounds to round out your force? Later

[TemplarsCrusade01]

@LOXMYTHIC If I could I would lol

[jimeronimo]

Man that sucker is going to be huge!

[TemplarsCrusade01]

@jimeronimo Its a lovely model, great fun to build ;)

[TemplarsCrusade01]

@jimeronimo lol I'll say so!

[kartoffelnpommesgut]

So, it's the third one?

[TemplarsCrusade01]

@kartoffelnpommesgut  This number three. ;)

[space197]

hey templarcrusade01, i remember you mentioned you work for the film indusrty, if i am right. but i have a question in mind in wanting to follow a career path in film animation, do you have any advice in what i may be required to achieve this. if you reply you will help me alot in my future.

[TemplarsCrusade01]

@space197 Look to become a runner as a summer job, its great to get some first hand experience . How old are you if you don't mind me asking? Collage courses are great, you'll learn a lot to get you on the road. I run a film service company which supplies concept art, story boarding, movie posters and so on to film and tv production companies, I also over see a film production company as head of Film Production. hope that helps ;)

[space197]

@TemplarsCrusade01 im 17 and currently at 6th form doing ict, product design and art btec at A level qualification, and what do you mean a runner as a job whats that?

[TemplarsCrusade01]

@space197 A runner bolts around delivering, picking up stuff, doing what ever the studio or department wants, its like a starting job, its low pay, but really great experience, its a dogs body job. You tend to find everyone starts there doing it for experience as a summer job. Some stay on, for in house training. My advise see if you can get that as a summer job, and put it on your application for Uni. if your doing A levels the you're in the UK Bournmouth has a fantastic animation course.

[space197]

@TemplarsCrusade01 thank you for the advice m8, much appreciated.

[TemplarsCrusade01]

@space197 no probs :) We've all been there. Just have to find some one to give you a start ;)

[MoreDakka101]

*drool*

[utrinque3NDparatus]

ssshhhh ya gonna get me in trouble that was supposed to be top secret lol

[Asken96]

what's that?

[RetributionAngel]

i wana convert one of those for my DAs some day ^^

[TemplarsCrusade01]

@RetributionAngel ouch a dark angel one would look evil lol

[OrcPainterNerd]

@RetributionAngel would you greenstuff a hooded cloak for it lol

[TemplarsCrusade01]

@OrcPainterNerd lol or give it a native american death wing look, loads of feathers and beads ;)

[RetributionAngel]

@OrcPainterNerd na... dual lightning-claws size XXXXXXXXXXXXXXXXXXXL :D

[OrcPainterNerd]

I remember about few months back searching youtube for videos on building Reavers ( not buying one i wish ) just to see how cool they are, so im really going to enjoy these vids :)

[TemplarsCrusade01]

@OrcPainterNerd hey thanks buddy ;)

[orkwarlord2]

I agree, a step-by-step would take a LONG time to do. Anyway, nice work mate and look forward to seeing the painting parts especially :)

[TemplarsCrusade01]

@orkwarlord2 cheers ork warlord ;)

[Asken96]

do you gone to build it as a BT titan?

[TemplarsCrusade01]

@Asken96 No Legio Atsorium matey ;)