We would recommend checking the following components of your car to make sure that it can function properly, check that:
1) the plasticine is holding your wheels in place,
2) the skewers (within the straws) are able to easily move,
3) the rubber band that is fastening your balloon to the straw isn’t attached too tightly (eg. preventing air from easily moving in and out of the straw/balloon) and
4) that you are testing the car on a clear, smooth surface.
To replace the cardboard, you need something firm, but light so it doesn’t weigh the car down. You could try sticking a few rulers together, or use the lid to a rectangular container (like Tupperware or take away).
To replace the skewers, you need something solid and thin so it doesn’t bend and move. You could use some thick fencing wire, a thin knitting needle, or a lolly pop stick. Just be careful you don’t poke yourself while working with sharp things :)
im doint this project for school...if i dont have crdboard or the skewers what could i use to replace these items. i have 1 day to make this and im not really close.
@Megan121796 im not totally sure but from looking at this u can get it the cardboard from a tissue paper box and if ur careful enough u can use toothpicks and tape them together...i would cut the pointy tips of the toothpicks and then tape them together however they might not be straight..
Thank you so much!! The idea and assembly is so simple, yet people like me couldn't figure it out. Your a lifesaver.. i WILL be passing physics this year lol. Do you know approximately how far it will go?
The best way to find out how far the car will travel is to make a car and test it out. The distance that your particular car will travel will vary depending upon a number of factors such as: the surface on which you are testing your car, the total weight of your materials, the size of your wheels, the type of balloon that you are using, the amount of air you put in the balloon, etc. Let us know how you go!
@QuestaconNSTC How far did your car travel, can you please reply back because i just want to estimate and find out how far mines will go. Thanks, Chief
@ChiefExecutive07 When we conducted the experiment we didn’t measure how far the car travelled. However, based on our observations of operating the balloon-powered cars in a number of settings, the cars can travel a couple of metres. The distance that your car will travel will depend upon the materials that you use to construct the car and the surface on which you operate the car.
Tape may be called different names in other countries. The generic name for adhesive tape in Australia is 'sticky tape'. Best of luck with your project.
Yes, it will travel at least 1.5 metres, but remember that different elements such as the surface of the floor, size of the balloon will effect the distance. Good Luck!
The best way to find out how far the car will travel is to make a car and test it out. The distance that your particular car will travel will vary depending upon a number of factors such as: the surface on which you are testing your car, the total weight of your materials, the size of your wheels, the type of balloon that you are using, the amount of air you put in the balloon, etc. Let us know how you go!
at the school project i failed hardly but then, what i used is a cardboard box, tape, thin bottle caps, and a ballon with out the straw, i actually did not use the straw because it makes ur car go further but slower. for an example if u make a monster truck and you used this type of method will it climb or go over anything i dnt think so well i tried the monster thing today, but i had my project long time ago, and ya i am in 8th grade and i will try to make a video about my project, or a CAR !!!
thank you so much my GRADE 10 sister was making this and she failed epicly so i loooked up this video and helped her using your design she was so thrilled and suprised that a ninth grader helped her. consider this channel subscribed from Zelda2geek
this is a really helpful video :) i have to make 1 for school, but the problem is mine wont work :( i made it before i watched this video, but its pretty much the same... maybe ill make a new one like this :)
My balloon kept on losing air because I didn't secure the tape on the straw tight enough and I think I'll use your technique of the rubber band. Thanks.
what caps did you use for the wheels?
SoNotLegit 4 days ago
@SoNotLegit Gatorade wheels, good luck!
We'd love to hear how it goes, so let us know!
QuestaconNSTC 4 days ago
ok my car is not moving and i followed the directions
joynte12 1 month ago
We would recommend checking the following components of your car to make sure that it can function properly, check that:
1) the plasticine is holding your wheels in place,
2) the skewers (within the straws) are able to easily move,
3) the rubber band that is fastening your balloon to the straw isn’t attached too tightly (eg. preventing air from easily moving in and out of the straw/balloon) and
4) that you are testing the car on a clear, smooth surface.
Hopefully these hints help!
QuestaconNSTC 1 month ago
@joynte12 I love you, because i am the same.
mzrandomvideos 1 month ago
i have to do this in school and the car has to travel at least 5 meters
Zeroskater102100 2 months ago
To replace the cardboard, you need something firm, but light so it doesn’t weigh the car down. You could try sticking a few rulers together, or use the lid to a rectangular container (like Tupperware or take away).
To replace the skewers, you need something solid and thin so it doesn’t bend and move. You could use some thick fencing wire, a thin knitting needle, or a lolly pop stick. Just be careful you don’t poke yourself while working with sharp things :)
Good luck, and have fun!
QuestaconNSTC 2 months ago
im doint this project for school...if i dont have crdboard or the skewers what could i use to replace these items. i have 1 day to make this and im not really close.
Megan121796 2 months ago
@Megan121796 im not totally sure but from looking at this u can get it the cardboard from a tissue paper box and if ur careful enough u can use toothpicks and tape them together...i would cut the pointy tips of the toothpicks and then tape them together however they might not be straight..
bballgirlj955 2 months ago
Thank you so much!! The idea and assembly is so simple, yet people like me couldn't figure it out. Your a lifesaver.. i WILL be passing physics this year lol. Do you know approximately how far it will go?
leadsnowhere 2 months ago
man this is my project...for science...XD
carlojeffersonyu45 3 months ago
how much distance will it go?
juvedbest1897 3 months ago
The best way to find out how far the car will travel is to make a car and test it out. The distance that your particular car will travel will vary depending upon a number of factors such as: the surface on which you are testing your car, the total weight of your materials, the size of your wheels, the type of balloon that you are using, the amount of air you put in the balloon, etc. Let us know how you go!
QuestaconNSTC 3 months ago
@QuestaconNSTC How far did your car travel, can you please reply back because i just want to estimate and find out how far mines will go. Thanks, Chief
ChiefExecutive07 1 month ago
@ChiefExecutive07 When we conducted the experiment we didn’t measure how far the car travelled. However, based on our observations of operating the balloon-powered cars in a number of settings, the cars can travel a couple of metres. The distance that your car will travel will depend upon the materials that you use to construct the car and the surface on which you operate the car.
QuestaconNSTC 1 month ago
Will it go 3 meters?
emmamaelde 3 months ago
Tape may be called different names in other countries. The generic name for adhesive tape in Australia is 'sticky tape'. Best of luck with your project.
QuestaconNSTC 3 months ago
isnt all tape sticky...? But good video
playmoney132 3 months ago
this helped. if you need it to travel 5 meters or more get 9 inch balloons and blow it alot so it can go far
zebraluvr20 4 months ago
Yes, it will travel at least 1.5 metres, but remember that different elements such as the surface of the floor, size of the balloon will effect the distance. Good Luck!
QuestaconNSTC 4 months ago
The best way to find out how far the car will travel is to make a car and test it out. The distance that your particular car will travel will vary depending upon a number of factors such as: the surface on which you are testing your car, the total weight of your materials, the size of your wheels, the type of balloon that you are using, the amount of air you put in the balloon, etc. Let us know how you go!
QuestaconNSTC 4 months ago
Will it go 1.5 meters?
Storskin 4 months ago
@Storskin i hope so
JBThawley 4 months ago
i had to drink 4 cokes to finish this
XJaysonRX 4 months ago
thnx man for giving me a idea for my physics project
dxdd34 5 months ago
i have to do this for a project what type of wheels were they (gatorade wheels)????
plzz reply ASAP!!!
lika345678910 6 months ago
@lika345678910 Gatorade wheels, yes…good luck!
QuestaconNSTC 6 months ago
haha that a cute little car he made!!!!!:P
XxCareyPrice1996xX 8 months ago
my little bro watch in school lol
xD4RKxMW2PRINCE 8 months ago
thumbs up if you need this for school
wakaphwap 9 months ago 51
THANK YOU!
tyangus 9 months ago
Fianlly a tut with good quality, that actually works. Thank youuuu :D
mLpJy 9 months ago
co za asy
29mathew29 10 months ago
sticky tape wait i used non sticky tape
sniper1231231 10 months ago
I hope this gets me an A in science
thelandofrandom01 1 year ago
@thelandofrandom01 did it? just curious?
dhatfleeswaqq 10 months ago
i dont think i have sticky tape
12321austin 1 year ago
at the school project i failed hardly but then, what i used is a cardboard box, tape, thin bottle caps, and a ballon with out the straw, i actually did not use the straw because it makes ur car go further but slower. for an example if u make a monster truck and you used this type of method will it climb or go over anything i dnt think so well i tried the monster thing today, but i had my project long time ago, and ya i am in 8th grade and i will try to make a video about my project, or a CAR !!!
SuperAlooi 1 year ago 8
thank you so much my GRADE 10 sister was making this and she failed epicly so i loooked up this video and helped her using your design she was so thrilled and suprised that a ninth grader helped her. consider this channel subscribed from Zelda2geek
zelda2geek 1 year ago
My car didn't move at all. ;_;
Please, someone help. This is due in two more days! Dx
lastresortluver 1 year ago
im so confused what works the best??? HELP ME!
lizzielynch15 1 year ago
THANK YOU DUDEEEEEEEEEEE MY TEACHER WAS LIKE YOU HAVE TO MAKE A DEVICE THAT MOVES 30 CM OR FARTHER WITH AIR IM LIKE WTF .... U SAAVEDD ME
LethalGunner99 1 year ago
it doesnt work
northflyer11 1 year ago
@LethalGunner99 30cm? mine has to go at least 5meters..
jvu1321 11 months ago
lol best wheels are cds! they role forever
bronchialcircle 1 year ago
@bronchialcircle how do get the cds to stay and not get them all wabbely
OGXPLAYBOY 10 months ago
this is for my sience project..... :)
NicoxPS3 1 year ago
@NicoxPS3 lol me too i hope it works i haven't tried it yet...
andrewg2017 1 year ago
this is for my sience project..... :) yhank man i hope i get a good grade
NicoxPS3 1 year ago
it's awesome :D
and red is the fastest? well then i better not choose a yellow balloon because it wouldn't move xD
wonkeytjuuuh 1 year ago 7
thanx man this relly helped i goT A GOOD GGRADE
25WarriorGhost 1 year ago
You're a HUUUGE help! thank you!
michgee 1 year ago
how far did it go by following his instructions?
EpicOwnage1212 1 year ago
thank you times a squillion. i put this project off to the last minute and you have SAVED ME
beanbutt23 1 year ago 2
Thank's man! I have to do one of these for a school project, but my science teacher won't tell us how to make it move.Two thumbs up!
subkz 1 year ago
this is a really helpful video :) i have to make 1 for school, but the problem is mine wont work :( i made it before i watched this video, but its pretty much the same... maybe ill make a new one like this :)
annabananabobtaco 1 year ago
this is my science project!!! hahah thanks!!!!
FwiedWice13 1 year ago
wow my camp used this video so we can make balloon cars tomorrow
EandK98 1 year ago
thx, i am going to use these very helpful tips on my project!! ahmazingg :))))
jennifers39 1 year ago
OMG! mine worked and it went so fast! thank you for making this video :)
tsai314t 1 year ago
@tsai314t WOW! my car went the farthest and got 100%
tsai314t 1 year ago
Thank god i found this. now I can do my science project, and not fail.
BleedForMyMother 1 year ago
thanks a lot. now i ca finish my projecttt
azngirl1854 1 year ago
i need more speed, any ideas?
shafiq123098 1 year ago
mines has to be at least 5 meters i made mines out of sunny d caps empty highliter gorilla glue kool aid box 2 balloons and its due tomarrow
MrMusicKing2010 1 year ago
good video
lifeisbad123 1 year ago
how far does it go?
for my project it needs to be 5 - 8 meters
mileyiscool14265 1 year ago
thanks a lot, but does it go far, cuz my teachers says it needs to go at least 5 meters.
lin12311 1 year ago
How long did this balloon powered car actually traveled? Cause I have the same project and it has to move at least 7 meters for me to get an A.
xx1lov3uxx 1 year ago
@xx1lov3uxx lucky mines 10
sugargliderpal202 1 year ago
thx dude i got 1st on da class race
714skater 1 year ago
Same here I have to do it for scienc class my teachers name is mr.pringle ha weird name right
jensvidss 2 years ago
@jensvidss HAHAHAH jennifer
xToxicTomatox 2 years ago
DEADLY!!!!!!!!!!!!!!!!!!!
thespudzy09 2 years ago
Thanks i got an A xD
XxDJ95xX 2 years ago
this got me an A on my Physics project!!! THANK YOU!!! && your very cute btw ;)
pinklax1 2 years ago
thx
thenameisjulio 2 years ago
very slow i need fastest not CUTEST
TheFaBiOxP 2 years ago
thaks i will use this for school
livliv1996 2 years ago
BA im gunna do this for my science project welll something like it
bunnyboey12 2 years ago
8 cm by 10 cm is too small
michael2hell4 2 years ago
This is EPIC!
sum761 2 years ago
I have to do this in my physical science class.
My balloon kept on losing air because I didn't secure the tape on the straw tight enough and I think I'll use your technique of the rubber band. Thanks.
emogal1232 2 years ago
tanks i needed it 4 school
piercedonnelly 2 years ago