I have a dell optiplex gx270 and I wanted to upgrade the memory with ddr2, but when I opened the desktop it had 4 sticks of 128mb ddr inside. Not sure if should I just add the ddr2 memory to the computer or find bigger sticks of ddr?
hey i have this problem i have a 950mb of ram which is 1gb but when i start up my computer it show 64mb only.....but int control panel its 950mb i need help please.
i had 2gb ram(ddr2 800) installed and added another 2gb ram(ddr2 800) on another slot of my Gigabyte(g41) mobo .. and it said "4.00 GB (3.2 GB usable)"
@wrektime1 you are probebly using a 32 bit operating system and a 32 bit OS can only handle 4gb inkl. all other memory in your system such as grafics card's memory etc.
1. Make sure your memory stick are compatible (like both Dimms) by checking online sources.
2. I had a complete crash until I figured out you must put the 1 gb stick in slot 0 and the 512 mb(old memory already in machine) in slot 1. I was able to mix sizes and manufacturers by putting the larger memory in the first available slot on the motherboard. Good luck!
my computer has a 1g of ram but when i did a scan norton 360 an it said it only has 512mb of ram ? but when i push the start key + pause/brack to bring the system info it says it has 1g of ram???
I recently bought a 2gb ram chip and I go to install it, and it doesnt fit in the slot!! I held both of them side by side and I could see the little notch in the middlle wasnt exactly in the same spot..... why is that?
That is because the RAM that you bought is not the same type as the RAM you already have. There are SDRAM (quite old and has two notches), after that goes DDR, DDR 2, DDR 3 (probably you have one of them and you bought another), each of them working on higher frequency than the previous.
its probabbly not compateable with your computer, go to fryes take yur old ram and show them yurs and tell themn u want better onces of thae type u have theyll help u out alot....
ive upgraded my ram from 1gb to 2gb ive installed bothe the 1gb ram and then i turn my pc on it beeps about 4 times a second. It seems to work with a mixture of 1gb and a 512mb ram. Any ideas why it dosnt work and how i can get it to work?
i just added 8 gb RAM to my 4 GB 64 bit windows 7 pc.
And it seams that windows only can detect 10 gb and not 12 gb.
But my other programs can detect 12 gb...
help...
Shaverea 4 months ago
he looks like the grandpa from family guy.
NikkerChicken 5 months ago
@NikkerChicken lol :D
brendonroxx 2 weeks ago
cool thanx.
MrSKSkill 10 months ago
Aww yeah, slot that memory in there... oh yeah baby.
LinkMyBoy 1 year ago 6
I have a dell optiplex gx270 and I wanted to upgrade the memory with ddr2, but when I opened the desktop it had 4 sticks of 128mb ddr inside. Not sure if should I just add the ddr2 memory to the computer or find bigger sticks of ddr?
daj3166 1 year ago
@daj3166 Better add DDR3 to keep it up to date.
LinkMyBoy 1 year ago
hey i have this problem i have a 950mb of ram which is 1gb but when i start up my computer it show 64mb only.....but int control panel its 950mb i need help please.
nikkolei 1 year ago
i had 2gb ram(ddr2 800) installed and added another 2gb ram(ddr2 800) on another slot of my Gigabyte(g41) mobo .. and it said "4.00 GB (3.2 GB usable)"
my mobo supports dual channel memory .. pls help.
wrektime1 1 year ago
@wrektime1 you are probebly using a 32 bit operating system and a 32 bit OS can only handle 4gb inkl. all other memory in your system such as grafics card's memory etc.
raketenDK 1 year ago
@raketenDK i have windows 7 home premium (64-bit) installed ..
P-41 gigabyte mother board
n9400gt (1gb) MSI graphic card
wrektime1 1 year ago
1. Make sure your memory stick are compatible (like both Dimms) by checking online sources.
2. I had a complete crash until I figured out you must put the 1 gb stick in slot 0 and the 512 mb(old memory already in machine) in slot 1. I was able to mix sizes and manufacturers by putting the larger memory in the first available slot on the motherboard. Good luck!
LeoKate1 1 year ago
i opened my pc amd all my data was gone
DWADE611 2 years ago
I had 2 gb of RAM and I bought a 2 gb DDR2 stick. I placed it into my computer, once I started my computer it said I only have 1 gig!!! Some one help
ChickenSaladAnyone 2 years ago
you motherbaord don,t support 2gb ram only 1gb that the prob
ultragaming1993 2 years ago
my computer has a 1g of ram but when i did a scan norton 360 an it said it only has 512mb of ram ? but when i push the start key + pause/brack to bring the system info it says it has 1g of ram???
fucking169 2 years ago
are you serious?
allan08ful 2 years ago
lol hahaahahah
DELON9966 2 years ago
I recently bought a 2gb ram chip and I go to install it, and it doesnt fit in the slot!! I held both of them side by side and I could see the little notch in the middlle wasnt exactly in the same spot..... why is that?
yfm4450 2 years ago
There are many different types of RAM.. suc as:
ddr., ddr2., ddr3.,.....
MuSzZCanShuffle 2 years ago
That is because the RAM that you bought is not the same type as the RAM you already have. There are SDRAM (quite old and has two notches), after that goes DDR, DDR 2, DDR 3 (probably you have one of them and you bought another), each of them working on higher frequency than the previous.
mywifeisdead2 2 years ago
wat is ur ram type that u buyed e.g: ddr2 sdram ddr ddr3.
what is ur make and model of ur computer e.g toshiba l300 and model num: l30-10x psl33e
Jamiet958 2 years ago
it's because that isnt the type of memory chip that your card needs..
SherMulli3 2 years ago
its probabbly not compateable with your computer, go to fryes take yur old ram and show them yurs and tell themn u want better onces of thae type u have theyll help u out alot....
bubbcz 2 years ago
what is the difference between ddr3 and ddr2?
ParazitiiRulzzz 2 years ago
DD3 IS A NEW AND FASTER TECHNOLOGY
Frassbazz 2 years ago
the size
blueskin95 2 years ago
.. lol.. the size..
ParazitiiRulzzz 2 years ago
randomness sez i RANDOMNESS
flatout25 3 years ago
pingers pingers pingers pingers
flatout25 3 years ago
ive upgraded my ram from 1gb to 2gb ive installed bothe the 1gb ram and then i turn my pc on it beeps about 4 times a second. It seems to work with a mixture of 1gb and a 512mb ram. Any ideas why it dosnt work and how i can get it to work?
oliverthedrummer 3 years ago
NEVER EVER use different types of ram. Ether stick with 512's or 1gb's.
xedon2 2 years ago
IT MIGHT MAX OUT AT 1.5GB
Frassbazz 2 years ago
This has been flagged as spam show
energetic fun smart and loves this video
funny video lets chat Rc
Chocobo123 3 years ago
good videos on youtube??
vatthepower 3 years ago
stop deleting my videos youtube!
chinathetown 3 years ago
shut up m8!
tippa2kk 3 years ago
wawa shittyshitty bang bang!#!#!!#
chilc 3 years ago
thanks
Crumpler68 3 years ago
puro ka salita eh wala namang gnawa
shadowstaff143 4 years ago