Mike I just posted the video with the resaults of my cell test. Had some luck but the cell got hot and melted. Didn't meen the give the plot away but maybe some advice on my mixture. I have a second one all most finished but going to add heat sinks to the cell. Let me know what you think. The vido is "testing my hho mini cell.avi". Maybe my msitakes can help and if you like you can comment on my page.
Mike! I tried to find my little tri-pod but I’m still looking. But while I do need the tri-pod for some of the things I still need to do most of my video holding the camera. I have a little HD camera that really shines up close and personal for a good view. Maybe I can come up with a shoulder mount. I have tested my mini hho cell and compiling the video with my results so check it out if you will. Thanks BUD! Still waiting for some things to finish my dry cell.
I'm steppin' in trying to build my first HHO cell. Can you tell me what are the HHO by-products after combustion ? Is it vaporized water ? What's the phenomenon creating the heat source ? (I know that H2 is the fuel and O2 the combustive).
I have several projects started. My back yard which is my little part that I have built over the last 5 years. Got three ponds with streems conectiong them and fountan at the top. One street light that uses 110 AC. I can go eather way and still be cut off from the house. So I will video that project to.
Hey Mike, I just want to say that you guys are my heros! I know what I want to do with the rest of my life now! I got time on my hands a work shop full of tools and freinds that have tools and recorces... I'm going to be very busy using the knowllage thats coming off you-tube! I hope to set up my own sustainability you-tube site for my community.
@hhoconnection I want to know detailed diagram of the small HHO generator. whether it consists of only two parts of the anode and cathode, and if cca1cm space between the anode and cathode is just water?
hhoconnection kit comes with bubbler built into the reservoir? And PWM is not needed?, I see Volo chip is recommended as option. Ammeter is not in the kit; not needed?. Tks.
@bavanaina The components in this video are for a HHO Torch. You are referring to the kits for sale on my site from GreenFuelH2O. They recommend a Volo chip as an option. I don't sell anything related to changing emissions. You can buy them from other retailers however
@someting29 A yellow flame usually indicates moisture in the line. Either that or contaminates (or both). Using a bubbler and/or dryer should turn a yellow flame blue.
Hi, this is Dan from Hydrogen Boost Now.com. I just wanted to thank Mike for making a video with our new 40 amp constant current PWM. Just so everyone understands, the PWM will go to 40 amps if the cell is large enough.
P.S. This PWM is 100% our design, we copied no one.
@water2gashawaii I'm not an electronics guy Bill, but it hooks up completely different than yours does. I don't think it's like your PCU-3. I didn't realize the PCU-3 was your design, I thought it was Zero's. It looks just like his anyway.
@hhoconnection no the PCU-3 is unique, and is similar to zero's design, but different.
You wont find the big capacitors in our unit. Plus our units drive the MOSFETs better and therefore they stay cooler than zero's design. Even though Hydrogen Boost Now's unit looks different on the outside, it looks to me like they copied our design on the inside.
If you adjust the frequency on the pwm you can change the sound. The voltage drop is due to the PWM's Duty Cycle is just under 100%. Also it is common on AC systems for the amps to go up and the volts to go down.
Have you experimented any with building your own high voltage power supply? I've seen some of the guys using pulsed dc for their systems. Coming straight out of the 120 or 240 grid to a transformer, then into a high amp bridge rectifier. They are using equipment like a router speed controller as the pwm. When they are using these supplies the cells only pull 1-5 amps and it seems to run just as smooth using low voltage high amps. Your thoughts?
@jdcproducts Unfortunately I am electronically challenged. I would love for somebody to come up with an inexpensive AC to DC power supply with voltage control. If anyone wants to build it, we need it. Only problem is you will have to use a larger cell (over 80 plates) which is going to drive the cost up again.
Mr. Mike i want to ask about the plate size , if the plate size is 30cm * 20cm and 13 or 21 plate for making a cell ! how much power it will need ? or let me ask in anther way if the plate size are big is that means more amp ! and what about the production !
@DOPEXAMP OK Mr big shot, here is your chance to put up or shut up. I am calling you out and saying NO WAY! Prove me wrong and show a video of you making 5 lpm at 12v and 30 amps. Talk is cheap!
@hhoconnection so PWM makes better or worse production?
chilidress 1 day ago
@chilidress A PWM just regulates the voltage which in turn allows you to make more or less HHO. Basically just give you control over the output.
hhoconnection 9 hours ago
Mike I just posted the video with the resaults of my cell test. Had some luck but the cell got hot and melted. Didn't meen the give the plot away but maybe some advice on my mixture. I have a second one all most finished but going to add heat sinks to the cell. Let me know what you think. The vido is "testing my hho mini cell.avi". Maybe my msitakes can help and if you like you can comment on my page.
vbrigham 2 days ago
Mike! I tried to find my little tri-pod but I’m still looking. But while I do need the tri-pod for some of the things I still need to do most of my video holding the camera. I have a little HD camera that really shines up close and personal for a good view. Maybe I can come up with a shoulder mount. I have tested my mini hho cell and compiling the video with my results so check it out if you will. Thanks BUD! Still waiting for some things to finish my dry cell.
vbrigham 3 days ago
Hello Mike,
I'm steppin' in trying to build my first HHO cell. Can you tell me what are the HHO by-products after combustion ? Is it vaporized water ? What's the phenomenon creating the heat source ? (I know that H2 is the fuel and O2 the combustive).
Thanks for all your clearly explanations !
MrWookie21 5 days ago
I have several projects started. My back yard which is my little part that I have built over the last 5 years. Got three ponds with streems conectiong them and fountan at the top. One street light that uses 110 AC. I can go eather way and still be cut off from the house. So I will video that project to.
vbrigham 1 week ago
ey mike que le pones al agua para producir hidrogeno tu lo vendes me interesa comprar el producto
crystian20101 1 week ago in playlist Favorite videos
Hey Mike, I just want to say that you guys are my heros! I know what I want to do with the rest of my life now! I got time on my hands a work shop full of tools and freinds that have tools and recorces... I'm going to be very busy using the knowllage thats coming off you-tube! I hope to set up my own sustainability you-tube site for my community.
vbrigham 1 week ago
@vbrigham That's what I want to hear, more people getting into HHO! Glad to have you on board.
hhoconnection 1 week ago
@hhoconnection I want to know detailed diagram of the small HHO generator. whether it consists of only two parts of the anode and cathode, and if cca1cm space between the anode and cathode is just water?
pepelopezali 3 days ago
@pepelopezali Watch my video called HHO Wet Cell vs Dry Cell - Why the dry cell is better
hhoconnection 2 days ago
hhoconnection kit comes with bubbler built into the reservoir? And PWM is not needed?, I see Volo chip is recommended as option. Ammeter is not in the kit; not needed?. Tks.
bavanaina 1 week ago
@bavanaina The components in this video are for a HHO Torch. You are referring to the kits for sale on my site from GreenFuelH2O. They recommend a Volo chip as an option. I don't sell anything related to changing emissions. You can buy them from other retailers however
hhoconnection 1 week ago
que le pones al agua para haser hidrogeno yb tu lo vendes
crystian20101 1 week ago in playlist Favorite videos
Mike, how can I use this cell to apply to my natural gas 40 gallon house water heater.? Thanks:)
bavanaina 1 week ago
@bavanaina I'm not sure that you can. HHO burns at a much hotter concentrated flame. You would need to find a way to dissipate the heat.
hhoconnection 1 week ago
watch my save money on fuel with one wire vid, your welcome. ;).
jocell202 3 weeks ago
Hello my friend.Can you tell me what to put for antifreez in my HHO generator because my water tank and my dry cell freezes.Thanks.
TEO7682 1 month ago
@TEO7682 Mix your electrolyte at maximum strength (28% for KOH). This will make you draw many more amps requiring 6 neutral plates or a PWM, or both.
hhoconnection 1 month ago
Why are most HHO torches i see have a orange flame and yours is blue?
someting29 1 month ago in playlist More videos from hhoconnection
@someting29 A yellow flame usually indicates moisture in the line. Either that or contaminates (or both). Using a bubbler and/or dryer should turn a yellow flame blue.
hhoconnection 1 month ago
Hi, this is Dan from Hydrogen Boost Now.com. I just wanted to thank Mike for making a video with our new 40 amp constant current PWM. Just so everyone understands, the PWM will go to 40 amps if the cell is large enough.
P.S. This PWM is 100% our design, we copied no one.
hydrogenboostnow 1 month ago
I love your bubbler with the stone, flash port and clear pvc. Can you build be one and if so how much would it cost me? Thanks
delvis11 2 months ago
Slow the water down and create more HHO.
Hollywoods7 2 months ago
That second PWM sux
water2gashawaii 2 months ago
@water2gashawaii What sucks about it Bill?
hhoconnection 2 months ago
@hhoconnection lol its a ripoff of my PCU-3, but it wont go up to max amperage.
water2gashawaii 2 months ago
@water2gashawaii I'm not an electronics guy Bill, but it hooks up completely different than yours does. I don't think it's like your PCU-3. I didn't realize the PCU-3 was your design, I thought it was Zero's. It looks just like his anyway.
hhoconnection 2 months ago
@hhoconnection no the PCU-3 is unique, and is similar to zero's design, but different.
You wont find the big capacitors in our unit. Plus our units drive the MOSFETs better and therefore they stay cooler than zero's design. Even though Hydrogen Boost Now's unit looks different on the outside, it looks to me like they copied our design on the inside.
water2gashawaii 2 months ago
@hhoconnection Zero's Design is Open Source, ours is copyrighted.
water2gashawaii 2 months ago
@water2gashawaii Actually it's a very nice unit. The PSU-3 has it's place too, it's not that expensive. But it is a power hog.
delvis11 2 months ago
If you adjust the frequency on the pwm you can change the sound. The voltage drop is due to the PWM's Duty Cycle is just under 100%. Also it is common on AC systems for the amps to go up and the volts to go down.
water2gashawaii 2 months ago
Mike I wish I could cut and edit video like you. Nice professional production. Your great behind the camera too. I love the power supply!
delvis11 2 months ago
Have you experimented any with building your own high voltage power supply? I've seen some of the guys using pulsed dc for their systems. Coming straight out of the 120 or 240 grid to a transformer, then into a high amp bridge rectifier. They are using equipment like a router speed controller as the pwm. When they are using these supplies the cells only pull 1-5 amps and it seems to run just as smooth using low voltage high amps. Your thoughts?
jdcproducts 2 months ago
@jdcproducts Unfortunately I am electronically challenged. I would love for somebody to come up with an inexpensive AC to DC power supply with voltage control. If anyone wants to build it, we need it. Only problem is you will have to use a larger cell (over 80 plates) which is going to drive the cost up again.
hhoconnection 2 months ago
Mr. Mike i want to ask about the plate size , if the plate size is 30cm * 20cm and 13 or 21 plate for making a cell ! how much power it will need ? or let me ask in anther way if the plate size are big is that means more amp ! and what about the production !
Thanks.
alandell999 2 months ago
NICE SETUP MIKE !!!LOOKS VERY GOOD !!!I LIKE THE BUBBLER ...NICE WORK
THEWATERENERGY1 2 months ago
Nice work Mike. Very informative and great video editing. I really like your bubbler design.
hydrophoenixx 2 months ago
mike you did it agin good job
jaimemarcial69 2 months ago
at 55 amps, 3-4 liters per minute is nothing. with a 9 plate cell at 30 amps 12v i can get 5 liters per minute.
DOPEXAMP 2 months ago
@DOPEXAMP OK Mr big shot, here is your chance to put up or shut up. I am calling you out and saying NO WAY! Prove me wrong and show a video of you making 5 lpm at 12v and 30 amps. Talk is cheap!
hhoconnection 2 months ago
@DOPEXAMP So what your telling use is you have a overunity hho cell? Please tell use, were listening.
12v @ 30a for 60sec making 5000ml is 13.88mmw or 179.26% efficiency.
where can I buy 300 of these?
delvis11 2 months ago