This is great! It works and is amazing. To put it together right, be sure to view the video demonstration of turning the magnets so that all three in the front attract each other and the 3 in the back repel. The other tip is to place the pencil's front magnet about 1/8 inch to the rear of the two front magnets that are attached to the base.
@dcyli if you took the maybe 15 seconds to look at my channel you would have seen am from the uk were we don't have a middle school. but I believe if I was in US I would be in the last year of high school.
and tbh I felt this really did need to be correct'd as you have shown your self by naming another resistance or friction.
Cool video, however your eBay ad states these as strong magnets..... I guess strong is a relative term? These magnets are extremely weak as far as magnets go. My refrigerator magnets are stronger!
its not frictionless. eventually i will stop, even if it was in a vacume. and over hundreds of years, the magnets would ware out and it would stop spinning/levitating.
The front 2 magnets must repel from the front magnet in the pencil. Same with the magnets at the back! The back 2 magnets must repel from the magnet in the pencil. (back)
Hello Sir! I have already started collecting magnets but they are of different sizes. I even got two of them broken accidentally. Your demonstration is really good. Almost anyone interested will be able to make that easily. I think it should possible to give the levitation a bit more height....thank you.
I know this works, but I do not seem to get the hang of it. I have tried this about 20 times, and I know I must be doing something wrong. Do you have any suggestions. I really would like to make this work. thank you.
@1930charles: a couple of tips. Be sure to note in the video that the front or forward magnets are turned so that all three attract each other. Similarly be sure all three rear magnets are turned so that they repel each other. the other important thing to do is place the front pencil magnet about 1/8 inch to the rear of the front magnets on the base.
a couple of tips. Be sure to note in the video that the front or forward magnets are turned so that all three attract each other. Similarly be sure all three rear magnets are turned so that they repel each other. the other important thing to do is place the front pencil magnet about 1/8 inch to the rear of the front magnets on the base.
wow, nice one. i'm gonna present this for our physics project. thanks for this. thumbs up! :)
louandnadz 4 days ago
Nice!
mrklew 3 months ago
very nice idea..keep it up..awsome
TheBertfox 3 months ago
This is great! It works and is amazing. To put it together right, be sure to view the video demonstration of turning the magnets so that all three in the front attract each other and the 3 in the back repel. The other tip is to place the pencil's front magnet about 1/8 inch to the rear of the two front magnets that are attached to the base.
RP
rand95060b 4 months ago
fantastic and in creadable
TheHaseeb911 5 months ago
its not frictionless, that is impossible, there is fristion between the pencil and the plate at the front.
just saying :)
Bptips 6 months ago
@Bptips And air friction. Stop being a smartass, you're still in middle school?
dcyli 5 months ago
@dcyli if you took the maybe 15 seconds to look at my channel you would have seen am from the uk were we don't have a middle school. but I believe if I was in US I would be in the last year of high school.
and tbh I felt this really did need to be correct'd as you have shown your self by naming another resistance or friction.
Bptips 5 months ago
Dude you're like an Indian MacGyver lol.
wilsua 6 months ago
Where do you get those magnets from though?
dinosaurcommunity 8 months ago
esta exelente!
juldarod0501 8 months ago
Does this pencil levitate, spin and write all that the same time? If so then you got yourself an order!
Time4TruthDOTorg 11 months ago
Very cool! I'll have to try making one for my office desk!
OttoBelden 11 months ago
@kei1010101010 hhhhhhhhhhhhhhhhhhhhhhhhhhhh
ThePr32 11 months ago
complimenti molto ben fatto
blasius50 1 year ago
I can't get it to work
Akira89M 1 year ago
Fantastic! I've seen similar toys sold but this is a fantastic method to make your own.
OftenRatherAmused 1 year ago
nice thats pretty cool!
4BeeFour 1 year ago
trolls they're everywhere... :l
cid232 1 year ago
Cool video, however your eBay ad states these as strong magnets..... I guess strong is a relative term? These magnets are extremely weak as far as magnets go. My refrigerator magnets are stronger!
BadSmaxx 1 year ago
Excellent ! Well done on a modest budget.
WHYDOYOUNEEDMYNAME 1 year ago
the magnetic field created by each magnet is rubing aginst each other so there is friction
GreatCommunistEmpire 1 year ago
do the magnets on the base hav to hav holes
babygj981 1 year ago
its not frictionless. eventually i will stop, even if it was in a vacume. and over hundreds of years, the magnets would ware out and it would stop spinning/levitating.
levicall 1 year ago
@levicall it is allso have the friction of the coin
bambi186 1 year ago
@levicall nit pic
Batina041 1 year ago
@Batina041 whats that supposed to mean
levicall 1 year ago
@levicall Thats not due to friction though. If this was in a perfect vacuum, the only friction would be the pencil tip on the coin.
meandmyevo 11 months ago
@levicall thanks! douche...
Nephalen 10 months ago
realy easy to make... nice!
something783 1 year ago
Thats not complete levitation because the pencil touches the coin, but its really cool. I'm trying to make complete levitation using the NeoCube :D
vladimir0B 1 year ago
where do i get ring manets???
heli121212 1 year ago
The front 2 magnets must repel from the front magnet in the pencil. Same with the magnets at the back! The back 2 magnets must repel from the magnet in the pencil. (back)
pangitbakekang 2 years ago
Hello Sir! I have already started collecting magnets but they are of different sizes. I even got two of them broken accidentally. Your demonstration is really good. Almost anyone interested will be able to make that easily. I think it should possible to give the levitation a bit more height....thank you.
asasolsh1 2 years ago
good job man nice
johnpham117 2 years ago 3
i like creativity
neweggbuilt 2 years ago
I know this works, but I do not seem to get the hang of it. I have tried this about 20 times, and I know I must be doing something wrong. Do you have any suggestions. I really would like to make this work. thank you.
1930charles 2 years ago
@1930charles: a couple of tips. Be sure to note in the video that the front or forward magnets are turned so that all three attract each other. Similarly be sure all three rear magnets are turned so that they repel each other. the other important thing to do is place the front pencil magnet about 1/8 inch to the rear of the front magnets on the base.
rand95060b 4 months ago
a couple of tips. Be sure to note in the video that the front or forward magnets are turned so that all three attract each other. Similarly be sure all three rear magnets are turned so that they repel each other. the other important thing to do is place the front pencil magnet about 1/8 inch to the rear of the front magnets on the base.
rand95060b 4 months ago
wow pretty cool
buddynumnum1 2 years ago
Keep it up! you can make MagLev helocopter blades
prabindahal 2 years ago
Very nice good work
AVAMagneticlev 2 years ago