Hey Satan you get your car worked on by CFT? I live in Orlando and bought me a 86 300zx turbo in crazy good condition body and engine wise. I just got a little boost leak and need to align my wheels a bit know any places I could take it man?And I push me car. killed me a Crappy Civic haha let me know I plan on working on mines before I head to UCF next year.
I read your posts on the board. You really are the heart and soul of the Z31 community. I could not have more respect for your achievements. (That's a dork way to say it, but I'll let it stand.)
87.5mm forged JE pistons. Eagle forged rods. South Bend Clutch to hold power. z32 AEM EMS computer with 1600cc injectors on E85 fuel and Hyabusa coils powered by MSD DIS4 ignition. Borg Warner S374 turbo on custom stainless tubular headers that I built. Custom aluminum sheet metal intake manifold utilizing a 90mm Q45 throttle body.
That is a rough idea on what is done. That lists maybe only about 10% of what I have done to the car though.
I run the VG30ET from the 84-89 z31. The bottom end of the z31 block and the z32 block are almost identical. The weakest point on both of the stock blocks, is their cast pistons. Either can hold roughly 500whp (give or take a little) depending on your tune.
Yeah, like a dumbass I pulled it for the weight savings (and it had the typical leaks these do). You tend to get used to it, but it still sucks. I don't recommend it.
0.o my z31 could totaly beat yours.......lol not really....not even close. i gots me a 1984 N/A 5 SPD!!! lol. bout to do the pathy intake and such, but before that my best time at the strip was a 10.08 in the 1/8 mile...I want 9s ;) lol but the rear end is going fast. its howling everywere i drive. any suggestions on were to get a new one? plus i need a clutch lol. also not helping that time any.
Rear end... cant help you. Clutch however... I now trust South Bend Clutch after my last clutch guy claimed he could make me a clutch to hold the power. Turns out he was wrong. South Bend came through and got me deep into the 10's and I know it will hold much more.
Pull apart the digital gauge cluster and pull out the green tint plates. Replace them with whatever color stage lighting parcan gels you want. I chose blue. Costs less than 10 bucks to do.
Did you make it to a gas station?
The1Z 1 month ago
spiritual
Mr131211109876543210 1 month ago
People like you ate the reason I still keep mine
DriftingVG 3 months ago
lol at having to hold the wheel steady at 65mph
BoobyMcDoogle 3 months ago
Hey Satan you get your car worked on by CFT? I live in Orlando and bought me a 86 300zx turbo in crazy good condition body and engine wise. I just got a little boost leak and need to align my wheels a bit know any places I could take it man?And I push me car. killed me a Crappy Civic haha let me know I plan on working on mines before I head to UCF next year.
stinvil 4 months ago
@stinvil
I don't live in Florida man. I live in Denver Colorado.
satanz31 3 months ago 2
"What is that? That does'nt sound normal.."
"UH Don't worry about that" lol!
iiMGorgeousBabii 5 months ago 2
were did u get the digital blue gauges? mine are still green and i want blue really bad
DJstyloz 5 months ago
Sweet! Love the blue lighting. Did you just replace the bulb? How difficult was it to do?
TucoRamirez2 6 months ago
LOVE THIS VID!!! mad props man!!! the sound is just amazen and its so fn fast!!!cant wait till im done swapen my 240....... 300sx te hehehe
carbenfiber450sxR 7 months ago
oh so the streetfighter is a toyota 2jz but sounds like you are running the nissan v6 turbo. Good job! Way cheaper and can still hold the power.
da7nesman 8 months ago
these things Are cars!!! porsche killers
drouen 8 months ago
I read your posts on the board. You really are the heart and soul of the Z31 community. I could not have more respect for your achievements. (That's a dork way to say it, but I'll let it stand.)
dogdove 8 months ago 2
@jfkyz125
I run an AEM solenoid that is controlled by the AEM computer. Basically just an electronic boost controller. Most of them work the same way.
satanz31 10 months ago
3rd gear 89 mph wthh
RzXVeRSaTiiLe 10 months ago
@RzXVeRSaTiiLe
Third gear goes to over 100mph at 7k as you can see in the vid. I have the redline set at 8k now.
satanz31 10 months ago
@satanz31 I love ths vid lol but yeah nice stuff bro i want my 88z31 Turbo like ths lmk what u did to ths like engine wise?
RzXVeRSaTiiLe 10 months ago
@RzXVeRSaTiiLe
87.5mm forged JE pistons. Eagle forged rods. South Bend Clutch to hold power. z32 AEM EMS computer with 1600cc injectors on E85 fuel and Hyabusa coils powered by MSD DIS4 ignition. Borg Warner S374 turbo on custom stainless tubular headers that I built. Custom aluminum sheet metal intake manifold utilizing a 90mm Q45 throttle body.
That is a rough idea on what is done. That lists maybe only about 10% of what I have done to the car though.
satanz31 9 months ago
@satanz31 amazing man! is the block the vg30 from the z31 or the vg30 from the z32?
RzXVeRSaTiiLe 5 months ago
@RzXVeRSaTiiLe
I run the VG30ET from the 84-89 z31. The bottom end of the z31 block and the z32 block are almost identical. The weakest point on both of the stock blocks, is their cast pistons. Either can hold roughly 500whp (give or take a little) depending on your tune.
satanz31 5 months ago
@RzXVeRSaTiiLe the first pull he hit like 98, then it jumped up to 102 like right when he hit 4th!!
SupraKid98 8 months ago
i usually dont like digi dash on the Z but blue looks great.
SoulAmazing92 11 months ago 2
Haha, the digital dash is not loving the speed increments!
z31club 11 months ago
blue digital dash O.o i want that on my Z too .. how did you do it ?
firemonkeyinc 1 year ago
@firemonkeyinc
Stage lighting colored filters.
satanz31 10 months ago
no power steering? You seem to be muscling the steering wheel
UnholySatyr 1 year ago
@UnholySatyr
Yeah, like a dumbass I pulled it for the weight savings (and it had the typical leaks these do). You tend to get used to it, but it still sucks. I don't recommend it.
satanz31 1 year ago
Comment removed
ctthenerd 8 months ago
@satanz31 No power steering can't be that bad!
ctthenerd 8 months ago
That is a fun video. Closest I'll get to a ride till I make it up there again. Great to see it moving again!
sqcreations 1 year ago
@sqcreations
Hey Eric! How you doin man! The car is faster now. From what I hear, you have no slouch of a z yourself!
satanz31 1 year ago
0.o my z31 could totaly beat yours.......lol not really....not even close. i gots me a 1984 N/A 5 SPD!!! lol. bout to do the pathy intake and such, but before that my best time at the strip was a 10.08 in the 1/8 mile...I want 9s ;) lol but the rear end is going fast. its howling everywere i drive. any suggestions on were to get a new one? plus i need a clutch lol. also not helping that time any.
xxSkyxStrifexx 1 year ago
@xxSkyxStrifexx
Rear end... cant help you. Clutch however... I now trust South Bend Clutch after my last clutch guy claimed he could make me a clutch to hold the power. Turns out he was wrong. South Bend came through and got me deep into the 10's and I know it will hold much more.
satanz31 1 year ago
someone needs some gas?
DJ2ARON 1 year ago
im going to do a blue and black interior/exterior (well blue and carbon) thats y i wanted to kno
nismohead100 1 year ago
how did you get your dash lights to shine blue?
nismohead100 1 year ago
@nismohead100
Pull apart the digital gauge cluster and pull out the green tint plates. Replace them with whatever color stage lighting parcan gels you want. I chose blue. Costs less than 10 bucks to do.
satanz31 1 year ago 2
This has been flagged as spam show
'that just doesn't sound normal!'
'ah don't worry about that'
LOL
grathapilot 1 year ago
Comment removed
grathapilot 1 year ago
Wow!
gotmoist714 1 year ago
Lovin the blue digi dash mod
devio1990 1 year ago
Digital speedo FTW :D
3OOOGTVR4 1 year ago
FUCK YEAH!!! Z31 FTW!!!
1971mustang007 1 year ago