how the heck could u possibly fit a hacksaw under the booster to cut the bottom panel off. You have to take the booster apart completely like I ended up doing. I may end up posting a video that gives a more detailed explanation of how to do this the best way possible without damaging the booster.
why not, i did it, and now my screamin serpant train can go in my rippin rocket boosters... watch my new coaster video, and you can see... its called the vortex...
im having a problem, i cut it just fine, bit the track must be in the wrong place because the part that connects the car and the wheel holder is catching on the booster wheel. it looks like my track is too high or something... plz post an update to clarify where the track goes!!!
hey listen i did all of that and it works for 1-3 cars but when i add a 4th it gets stuck in the booster and the front car detatches and goes off to do its own thing do i need new batteries or is it something more serious?
ok well i figured out that the track is suppost to be put in the holes on the booster, and not on top of it...and second for it to work the best, you should put it on a straight piece of track.
thanks for this. i wanted to see these steps before i went through with mine. so if i have a 4 car coaster, would this booster be practically useless?
well...i am using a 3 car one right now...i am going to add a fourth one...and for me...it works...if you do it rright..it is like a push taht helped me..but in some videos aomeone used 7 cars i think and theres worked like really well it lauched prety good...so to answer your question...if you do it right then yes it should give it a good push.
@ephym built the minebuster and got like six cars to go through it........ i dont know
MrKnexdude101 7 months ago
Comment removed
MrKnexdude101 7 months ago
how the heck could u possibly fit a hacksaw under the booster to cut the bottom panel off. You have to take the booster apart completely like I ended up doing. I may end up posting a video that gives a more detailed explanation of how to do this the best way possible without damaging the booster.
Nerdydolfin 2 years ago
why not, i did it, and now my screamin serpant train can go in my rippin rocket boosters... watch my new coaster video, and you can see... its called the vortex...
Sweetness293 2 years ago
im having a problem, i cut it just fine, bit the track must be in the wrong place because the part that connects the car and the wheel holder is catching on the booster wheel. it looks like my track is too high or something... plz post an update to clarify where the track goes!!!
Sweetness293 2 years ago
no, then the wheel holder will catch on the plastic... i already though of that
Sweetness293 2 years ago
your insane. i would rath er use the rippin rocket car instead of breakin my boosters
AlphaGuitarGamer 2 years ago 5
@AlphaGuitarGamer dude rippin rocket cars suck beacause they break the whole time
theFMLP 9 months ago
@theFMLP have you noticed that comment was posted a year ago?
AlphaGuitarGamer 9 months ago
@AlphaGuitarGamer whatecer maybe he is awiting a year for the answer ;d
theFMLP 9 months ago
how do you build the track?
bzzymatt 3 years ago
so you all know i tried this and it aint work LOL
kvjghvggjvg 4 years ago
thanks so much man I now have bosers that work with a screaming serpent car
xxxhalolover99 4 years ago
yes you have to be very careful, but you can buy 2 of them off ebay for like 5
msoccerkidm 4 years ago
hey listen i did all of that and it works for 1-3 cars but when i add a 4th it gets stuck in the booster and the front car detatches and goes off to do its own thing do i need new batteries or is it something more serious?
DDRman732865 4 years ago
ok well i figured out that the track is suppost to be put in the holes on the booster, and not on top of it...and second for it to work the best, you should put it on a straight piece of track.
msoccerkidm 4 years ago
great thx
DDRman732865 4 years ago
wait so attach the track through the holes and it will work?
AerotechMan101 3 years ago
slechste filmpje dat ik ooit heb gezien
atarirct3 4 years ago
prut man
dominodayfan 4 years ago
THANK YOU!
bsktballdude 4 years ago
wow.... amazong cough* cough*
martindalekboy 4 years ago
do u have to use a hacksaw or can u use a handsaw...
sumthin333 4 years ago
dusnt matter...as long as it cuts the plastic.
msoccerkidm 4 years ago
why is the top of the right booster falling off?
meziens10 4 years ago
oh that is because i unscrewed the top to see if i could just like take off the frame...but i couldnt and i for got to put the top back on.
msoccerkidm 4 years ago
thanks for this. i wanted to see these steps before i went through with mine. so if i have a 4 car coaster, would this booster be practically useless?
jamesyboy1990 4 years ago
well...i am using a 3 car one right now...i am going to add a fourth one...and for me...it works...if you do it rright..it is like a push taht helped me..but in some videos aomeone used 7 cars i think and theres worked like really well it lauched prety good...so to answer your question...if you do it right then yes it should give it a good push.
msoccerkidm 4 years ago
thanks. what should i look out for when doing this so i "do it right" (what could i do wrong to mess up the booster)?
jamesyboy1990 4 years ago