Squirrel TV 24: Squirrelerado Proj, Selling, RC8.2 Review, Soldering ?'s

[maxyd98]

what is better more or less kv

[Blackout9550]

I have more than one post and all I can find is the "Great Deals Around the Net!" section. I can't seem to find your sale thread.

[mq1506]

Is the ofna LX-2 a good buggy or should I go up to a nexx 8

[oldanski311]

Squirrel, what product would you recommend using to make clean up easier and protect my kit from rust, dirt, mud, etc. I've heard of people using Maxima SC1, Moo-slick, WD-40, and Blaster. I'm not sure of the pros/cons are between oil, silicone and dry Teflon lubricants. (P.S. I know you have done videos related to stuff like this, but what products are best at what.)

[MrJcosenza79]

@squirrelod is the rampage MT gas easy to maintain rather then nitro? Is the rampage any good?

[videoposter555]

Hey, where did you get your sweater? 

[AKASwagerHD]

does anybody know where i can buy a himoto katana truggy..? lol cant find it anywhere. thanks.

[Squirrelod]

@AKASwagerHD answering over PM as it is a link

[omfgg3tlost]

@AKASwagerHD have you ever tryed just googling it i found it under 20seconds

[mmRC1524]

What motor/esc combo do you recommend for the slash 4x4?

[Squirrelod]

@mmRC1524 pro4 rx8 combo

[TheMrbigOne1]

I dont know if you have a video on this or not but, how exactly do you match your gearing on an electric car? is it something like even number pinion and even # spur or odd pinion and even spur etc.? (if that makes sense) thanks! im kinda new to electric.

[Squirrelod]

@TheMrbigOne1 I go off of handling and temp of batt, esc, and motor. All should be warm. Guide is on my form.

[Squirrelod]

@TheMrbigOne1 I go off of handling and temp of batt, esc, and motor. All should be warm. Guide is on my form.

[Squirrelod]

@TheMrbigOne1 I go off of handling and temp of batt, esc, and motor. All should be warm. Guide is on my form.

[Squirrelod]

@TheMrbigOne1 I go off of handling and temp of batt, esc, and motor. All should be warm. Guide is on my form.

[Squirrelod]

@TheMrbigOne1 I go off of handling and temp of batt, esc, and motor. All should be warm. Guide is on my form. 

[Squirrelod]

@TheMrbigOne1 I go off of handling and temp of batt, esc, and motor. All sshould be warm. Guide is on my form.

[12vCummins42]

hey Squirrel,i want to start getting into using lypo batteries but dont know anything about what the numbers mean or what company sells the best for the money?

[Squirrelod]

@12vCummins42 Ill put in a future squirrel tv over a lot to go over. Till then, Lipo U playlist in video description.

[kinkfreebird96]

Awsome video!!!

[Squirrelod]

@kinkfreebird96 Thank you for watching =)

[GoingBrushless4X4]

what shocks do you run on your short course trucks??? im looking to get a really good pair for my Slash 4x4 that doesnt have the big bog in the back end



[Squirrelod]

@GoingBrushless4X4 I go with stock to see how it does and then upgrade if they need it. Those shocks are fine, but if you really want to upgrade, then power strokes.

[04toys]

I have a Tekin 2250 and a Tekin 1700 motor and I'm running a RX8 on one and I want to know if the Mamba Monster esc would be stronger I also know it's not sensored bt is it any stronger?

[Squirrelod]

@04toys Stronger as in???

Id stick with the RX8 honestly and personally. THey handle better.

[MTRGSR]

Why April to May?

[Squirrelod]

@MTRGSR Im working on it now, I will be finished with it by then. I do not release vids till they are done typically.

[mathew7817]

Squirrel, can u run 2 motors of of 1 ESC?????, Thanks

[Squirrelod]

@mathew7817 If the single ESC can handle the draw of both the motors, then yes. I have wiring diagrams on my forum.

[slashtracker]

squirrel what do you think of the new traxxas tqi?

[piecnqueso]

Still waiting for u to get the xo-1!!! Hope it's cominig soon!!!

[Squirrelod]

@piecnqueso I have it already and the EXO.

[masterfurb1]

I agree with LeMieux250, I wouldn't change a thing, always informative, always helpful.

[Squirrelod]

@masterfurb1 Thank you, and trust me, I am done listening to people who want to change me. Like me, hate me, I dont care- I am who I am and this channel is about the information and not ego or fame. I do this in my spare time, I have a profession that pays the bills, so I have no incentive to do things differently for one or two people =)

[mmRC1524]

Hey im new to the hobby, and I was wondering what the difference is between higher and lower KV motors?

[BashMonkeyRC]

@mmRC1524 kv is the number of motor rpm's per volt. higher kv motors have faster revolutions but as a result they tend to have lower torque. Likewise, lower kv motors have slower revolutions but they also have more torque. For example, a 1/10 scale average-sized racer would use a 3000-6000kv motor, while a bigger heavier 1/8 scale monster truck uses a 2200kv motor.

[Squirrelod]

@mmRC1524 Speed. KV * V = RPM. Check out my Electric University and Lipo University series. Both are playlists and linked in the vid description.

[EasyDozit13]

Hey squirrel what you think about the HPI apache C1 an SC , a review from you would be great, love all your videos watch all I can, thanks

[Squirrelod]

@EasyDozit13 Hola- at this time I have no desire to review them, sorry my friend.

[CorbinsVids]

nevermind

[Squirrelod]

@CorbinsVids Right on ;)

[RCMANIAC59b]

hey squirrel, i have the losi mini monster baja. Im pretty sure that it's the same as your mini lst2 just in the monster truck version. I have been through a couple servos,motors, and esc's. Is it worth uprgading and if so what do you suggest i do? thanks

[Squirrelod]

@RCMANIAC59b ExoTech chassis with the 1/10th scale servo (MG 645) and a Medusa motor with a 1/10th esc.

[RCMANIAC59b]

@Squirrelod thanks!



[CorbinsVids]

i still cant figure out the forum.Im trying to find your stuff for sell :(

[dgcghg864]

My question is, why don't you show your face when you are talking. I think it would make your videos better if you did.

[Squirrelod]

@dgcghg864 1000 videos. 200 of which I do.

This is how I do my vids my friend as it focuses on the RC or topic at hand. My face doesnt matter if you need to see a RC or something in the shot... or my balls. If it bugs you that much then do not watch =) It will not bother me as I am about the information and not vanity to show my face.

[LeMieux250]

@Squirrelod Honestly, after all these years, it would seem weird if there wasnt the bench on the right, and some of you on the left. I wouldnt change a thing :)

[Squirrelod]

@LeMieux250 Oh I am not.

People want me to change "me" all the time. I just do this as a hobby and in my spare time. No reason to change =)

[hbmxx2]

Great video