So by increasing the exposure compensation you make the image brighter, and by decreasing the exposure compensation you make it darker? Is that it? Doesn't the ISO setting do the same thing?... What settings in your camera would you use to take a shot of a snowy park at daytime with bright smiling sunlight? Would you increase or decrease exposure compensation?
@sinwori: 1. NO! shooting camera RAW and adjusting Exposure is NOT the same as shooting RAW and adjusting WhiteBalance! Using the method you describe would almost certainly mean loss of picture information (image captured too bright/dark) - you should always get it 'Best as' at source.
2. Spot metering in this video example would be impractical for a few of reasons:
a) the flower itself has several shades of light and dark and is a very small object. Getting the area to spot could be tricky.
1. if you shoot raw you can adjust the exposure in lightroom or photoshop just as you like. so why do it this way?
2. you could use the metering center weighted or even better the point metering on the flower. that should give you the right exposure. will this give you the same results?
Why don't you widen up the aperture or decrease the shutter speed to let more light in instead of brightening up the photo with exposure compensation? i'm a little confused as to why we need to change exposure compensation and not shutter speed or aperture because the latter two would increase the brightness as much as exposure compensation will..right?
Better to learn how to use the spot meter. Unless you like taking 3 shots of everything. This will work if you have time. But what if you have a subject that won't wait for you? The photo is lost. :)
Hi Gavin, thank you for posting these tutorials, they benefit so many!
I know there is always more than one way to achieve good results, so I want to ask you if adjusting the shutter speed on both examples, or if using spot metering in shutter or aperture mode would be other ways to achieve the same results.
Thanks again for your tutorials, and thanks in advance for the response.
Thank you so much I have the Nikon Coolpix P100 and I will so use this for some of my shots Im new to more advanced cameras or more advanced than point and shoot pocket cameras. I've been playing with shutter speed and apatures and for some shots with dark or light backgrounds I was trying to take them using shutter speeds rather than exposure compensation for absorbing light but its not practical that way especialy without a tripod so this helps a lot.
thanks gavin.can u pls show us the technique for metering fromdifferent spots on the scene to use for calculations to use ndgradfilters for landscape pictures.
Hi Gavin, I would like to ask you this: Isn't it better to take a photo always with the right exposition? Because in this case i could modify my photo in photoshop later in every way I want.
@birbafritz But the cameras meter is always the right exposure there are times when it can be fooled by a dark or light subject. That's the whole point of exposure compensation.
It's ALWAYS better to get the image right in camera. I avoid thinking "I could modify my photo in photoshop later" even if it's technically true.
For all the questions about using it in manual mode -- there is no exposure comp in manual because you don't need it. All it does it change the shutter speed by however many stops you tell it to, and when in manual mode you have full control over the shutter speed and aperture, so you can expose it however you want, regardless of what the meter tells you.
Hi Gavin, just a quick question most of the time if you shot towards the sky you'll get blown out sky when you set the exposure +1 or +2.. how do you compensate that?
Thanks in advance been watching all your videos it's been a great journey for learning from your tutorial.
@venerdian Take two exposures one for the sky and another for the flower. Then use photoshop to merge them together. You'll find a video of mine somewhere on YouTube on how it's done.
Wanted to thank you personally for taking out the time from your busy schedule to make these videos for us. Gavin, thank you on behalf of everyone who follows you and learnt from your videos. A job well done!
@fret2424 I guess you mean aperture rather then exposure. As I tend to work in Av mode so it's always my shutter speed that changes. You just need to keep an eye on it to make sure your images stay sharp. Tweaking the ISO can often help.
@PhotoGavin I get Aperture, and often use it specifically to adjust DOF, and let my camera adjust shutter speed (Aperture mode), however if I'm not getting a good exposure, with the DOF I want, I'll often switch to manual, and move my shutter a stop (or two), while keeping the same aperture.
I just didn't know the difference between using the shutter vs. the exposure.. I tend to over look the exposure setting and go for the shutter speed. Am I shooting myself in the foot (pun intended)?
Hi gavin! Just a quick one, on manual mode, how does the exposure compensation on the the screen differ from that of the meter inside the view finder?
@PhotoGavin It works on Nikon and afair Sony cameras when you're using auto ISO ( But that's another story). Also the meter inside the viewfinder is still active in Manual mode and changes correspondingly.
@PhotoGavin Does the meter indicator inside the viewfinder or on the LCD still not show in manual mode whether you would need to adjust your settings +/- EV in order to get the compensated value?
If I have my D300s in manual mode at 0EV, and dial in the settings the meter suggests, then set exposure comp to -2EV, the indicators will tell me I'm overexposing by 2 stops and that I need to (manually, of course) adjust my settings.
Of course, you could just spot meter in the first place. :)
@PhotoGavin , isn't that strange that you can't manually modify exposure when in full manual mode? I'm not hat knowlidgeable about cam features, but I can modify exposure on my 50D, except for the presets or the full auto stands.
@starboymachine from what I've experienced, when you look at the screen, theres a little bit of light hitting the meter from behind through the viewfinder, that's why there is a little accessory to place on top of the VF when using the live view mode. when you look through the view finder, you're blocking that extra light. I've had situations where that amount of light was not relevant in terms of exposure, but it can be some times. mostly i change exposure while looking through VF....
So by increasing the exposure compensation you make the image brighter, and by decreasing the exposure compensation you make it darker? Is that it? Doesn't the ISO setting do the same thing?... What settings in your camera would you use to take a shot of a snowy park at daytime with bright smiling sunlight? Would you increase or decrease exposure compensation?
Altair8801 3 weeks ago
Could u have zoomed in just enough so that the flower dominated about 70-80% of the frame and then lock the exposure? Just curious.
RainnMakerr 1 month ago
Use spot-meterng instead for a much better result.
powermichiel 1 month ago
Thanks!
EgdeFilms 1 month ago
Learn to use spot metering and practice finding "middle gray" on your composition and you don't have to worry about exposure compensation ever again.
jrajesse 2 months ago
Very clear and concise explanations. Thankyou
melea39 2 months ago
Gavin nicely done. Finally it makes sense. Still got to ask tho, why to use EC, when you can reduce the aperture?
kaspariito 2 months ago
Niceee...
YouLaToya 3 months ago
can u post a video on uses of polarizing filters
animesh099 3 months ago
You really speak a lot of knowledge.
blackisredandblue 5 months ago
i don't understand this, why not just move your aperture smaller by a few stops?
EddieTLawson 5 months ago
ok very informative.. but can i get the same effect from any software like lightroom?
if i dont change exposure compensation on shoot by any mistake so can i make it with lightroom?
movania89 5 months ago
very helpful. thanks
idiotgear 6 months ago
Hi Gavin!
Instead of using exposure compensation, If i used spot metering and centered my camera on the subject.. will this give me the same result ?
Thanks for your videos !!
Chri5o 6 months ago
Goooooood...so simply but so useful ... didn't know this before...thank you :D
mouzfan33 7 months ago
What metering mode are you using?
lllholder 7 months ago
I don't get exposure compensation... Why not just shoot in manual all the time and you'll get the desired result.
Richydudeman 8 months ago
thank you a lot :)
elijah1word 8 months ago
Thanks Gavin, I understand this now. :]
MiniParkourKid 9 months ago
You are awesome Gavin, thank for helping the photo comunity....
-MSR
Formula1NSX 10 months ago
You are in P mode???
brajakisoradasgkg 11 months ago
You're the best Gavin :)
digitalportugal 1 year ago
hey please check out my video *photography* that i made im not a professional but i want people to see what i can do and what they think! thanks!
starlightaoril19 1 year ago
@Sinwori Always shoot RAW and always get what you want out of the camera. Never think "it's ok I'll fix it in Photoshop".
shadowblack1987 1 year ago
@sinwori: Continued from last post:
b) flowers move on windy days!! Difficult to spot meter!
c) The composition requires an overall reading as its not only the flower you are exposing for. Spot metering wouldn't allow for that.
FCPWHAT 1 year ago
@sinwori: 1. NO! shooting camera RAW and adjusting Exposure is NOT the same as shooting RAW and adjusting WhiteBalance! Using the method you describe would almost certainly mean loss of picture information (image captured too bright/dark) - you should always get it 'Best as' at source.
2. Spot metering in this video example would be impractical for a few of reasons:
a) the flower itself has several shades of light and dark and is a very small object. Getting the area to spot could be tricky.
b
FCPWHAT 1 year ago
i have two questions about this technique:
1. if you shoot raw you can adjust the exposure in lightroom or photoshop just as you like. so why do it this way?
2. you could use the metering center weighted or even better the point metering on the flower. that should give you the right exposure. will this give you the same results?
Sinwori 1 year ago
thanks :)
seek3r14 1 year ago
Hi Gavin, what camera is it the you are using in this video?
Huntseason45 1 year ago
Thank you so much Gavin! You definitely have a talent for teaching. Can't wait to watch your other videos... I have a lot to learn.
susanwitti 1 year ago
Why don't you widen up the aperture or decrease the shutter speed to let more light in instead of brightening up the photo with exposure compensation? i'm a little confused as to why we need to change exposure compensation and not shutter speed or aperture because the latter two would increase the brightness as much as exposure compensation will..right?
Thanks in advanced for the response
blueeyevisualize 1 year ago
icant seem to find exposure compensation on my nikon d3000
can anyone help me?
frustratingusername 1 year ago
Better to learn how to use the spot meter. Unless you like taking 3 shots of everything. This will work if you have time. But what if you have a subject that won't wait for you? The photo is lost. :)
thepiecesfit 1 year ago
Hi Gavin, thank you for posting these tutorials, they benefit so many!
I know there is always more than one way to achieve good results, so I want to ask you if adjusting the shutter speed on both examples, or if using spot metering in shutter or aperture mode would be other ways to achieve the same results.
Thanks again for your tutorials, and thanks in advance for the response.
Cheers.
shinpaj 1 year ago
Thank you so much I have the Nikon Coolpix P100 and I will so use this for some of my shots Im new to more advanced cameras or more advanced than point and shoot pocket cameras. I've been playing with shutter speed and apatures and for some shots with dark or light backgrounds I was trying to take them using shutter speeds rather than exposure compensation for absorbing light but its not practical that way especialy without a tripod so this helps a lot.
gamegod19 1 year ago
thanks gavin.can u pls show us the technique for metering fromdifferent spots on the scene to use for calculations to use ndgradfilters for landscape pictures.
wahid2612 1 year ago
Hi Gavin, How about to take the photo with 0 compensation and adjust exposition with photoshop, for example? Any difference with the way you do it?
fmartinezben 1 year ago
Thank you. They are basic but good tips to remember. Especially for me because I am newbie.
javyeres 1 year ago
exposure compensation is retarded. Learn to use your camera manually like a true photographer.
bragtern 1 year ago
@bragtern Joe Mcnally, Chase Jarvis to name a few all use a variation of the auto modes
finn3rs1993 1 year ago
@bragtern Really? True photographers don't bracket their exposures?
oceandrew 1 year ago
great video thanks.
rekez2 1 year ago
This is great! I was never really sure how to use exposure compensation. I can't wait to start working with it now
the0panic0button 1 year ago
what was the metering zone u used for this awesome video?
darshdarshu 1 year ago
@Guikri, xfiredevilxxx:
Es heisst "Einstellen der Belichtungskorrektur"
Auf der Rueckwand is eine Taste (Av +/-).
Halten Sie die Taste gedrückt,
und drehen Sie die Wahltaste
nach rechts (Aufhellen) oder nach links (Abdunkeln)
fmassin 1 year ago
Hi Gavin, I would like to ask you this: Isn't it better to take a photo always with the right exposition? Because in this case i could modify my photo in photoshop later in every way I want.
Thanks in advance
birbafritz 1 year ago
@birbafritz But the cameras meter is always the right exposure there are times when it can be fooled by a dark or light subject. That's the whole point of exposure compensation.
It's ALWAYS better to get the image right in camera. I avoid thinking "I could modify my photo in photoshop later" even if it's technically true.
PhotoGavin 1 year ago 20
@PhotoGavin
wxb200 1 year ago
@PhotoGavin i totally agree on that sir! :D
23black061 1 year ago
Thank you, that was very helpful!
defixioN 1 year ago
For all the questions about using it in manual mode -- there is no exposure comp in manual because you don't need it. All it does it change the shutter speed by however many stops you tell it to, and when in manual mode you have full control over the shutter speed and aperture, so you can expose it however you want, regardless of what the meter tells you.
llamasrage 1 year ago
thank you
wuddlknuddel 1 year ago
Hi Gavin, just a quick question most of the time if you shot towards the sky you'll get blown out sky when you set the exposure +1 or +2.. how do you compensate that?
Thanks in advance been watching all your videos it's been a great journey for learning from your tutorial.
venerdian 1 year ago
@venerdian Take two exposures one for the sky and another for the flower. Then use photoshop to merge them together. You'll find a video of mine somewhere on YouTube on how it's done.
PhotoGavin 1 year ago 4
Lovely videos, keep up the good work...^^!
audinest18 1 year ago
You have a really nice garden!
computersguy13 1 year ago
What would we do without Gavin? :)
Wanted to thank you personally for taking out the time from your busy schedule to make these videos for us. Gavin, thank you on behalf of everyone who follows you and learnt from your videos. A job well done!
OreoCookieOreo 1 year ago 38
Very good video. Thanks!!
WildOrchid85 1 year ago
Great video Gavin, but I have a question about exposure.
What are the benefits of changing the exposure over the shutter speed?
Or, what would be the negative effect of increasing the shutter speed one stop, vs dropping the exposure one stop?
fret2424 1 year ago
@fret2424 I guess you mean aperture rather then exposure. As I tend to work in Av mode so it's always my shutter speed that changes. You just need to keep an eye on it to make sure your images stay sharp. Tweaking the ISO can often help.
PhotoGavin 1 year ago
@PhotoGavin I get Aperture, and often use it specifically to adjust DOF, and let my camera adjust shutter speed (Aperture mode), however if I'm not getting a good exposure, with the DOF I want, I'll often switch to manual, and move my shutter a stop (or two), while keeping the same aperture.
I just didn't know the difference between using the shutter vs. the exposure.. I tend to over look the exposure setting and go for the shutter speed. Am I shooting myself in the foot (pun intended)?
fret2424 1 year ago
gavin is coooool!
JackPierreAziz 1 year ago
@Jesusonine Ich denke, dass er einfach die Blende/Verschlusszeit variiert hat, was im Grunde eine Belichtungsangleichung ist.
xfiredevilxxx 1 year ago
Hi gavin! Just a quick one, on manual mode, how does the exposure compensation on the the screen differ from that of the meter inside the view finder?
starboymachine 1 year ago
@starboymachine Exposure Compensation doesn't work in Manual mode. On my Canon it's only available in Av, Tv and Program.
PhotoGavin 1 year ago 6
@PhotoGavin It works on Nikon and afair Sony cameras when you're using auto ISO ( But that's another story). Also the meter inside the viewfinder is still active in Manual mode and changes correspondingly.
Beatbot 1 year ago
@PhotoGavin Does the meter indicator inside the viewfinder or on the LCD still not show in manual mode whether you would need to adjust your settings +/- EV in order to get the compensated value?
If I have my D300s in manual mode at 0EV, and dial in the settings the meter suggests, then set exposure comp to -2EV, the indicators will tell me I'm overexposing by 2 stops and that I need to (manually, of course) adjust my settings.
Of course, you could just spot meter in the first place. :)
kaouthiavideo 1 year ago
@PhotoGavin thanks a lot.
starboymachine 1 year ago
@PhotoGavin , isn't that strange that you can't manually modify exposure when in full manual mode? I'm not hat knowlidgeable about cam features, but I can modify exposure on my 50D, except for the presets or the full auto stands.
pooleroes 1 year ago
@starboymachine from what I've experienced, when you look at the screen, theres a little bit of light hitting the meter from behind through the viewfinder, that's why there is a little accessory to place on top of the VF when using the live view mode. when you look through the view finder, you're blocking that extra light. I've had situations where that amount of light was not relevant in terms of exposure, but it can be some times. mostly i change exposure while looking through VF....
pooleroes 1 year ago
cool, but what is exposure compensation in german??
Guikri 1 year ago
@Guikri
how about Belichtungskorrektur ;)
Thanks again Gavin. Keep the good job.
romandpl 1 year ago
@Guikri ich glaub bei uns das EV, der wert den du auf werte zwischen +2 und -2 setzen kannst
kamikatze07 1 year ago
thank you gavin!
andrew88ng 1 year ago
cool!
Dannyhitter 1 year ago